put a NA header on it to pressure was it before it gets installed
engine harness pretty much done, injector harness is gonna be on its own
So after finding the rear tranny mount and bracket, i sandblasted them and laid a quick coat of low gloss to it. next came time to install the motor...
that didnt go so well the crank pully was gonna take out my fresh paint that seems to be fairly brittle as is. not a good thing at all. oh welllllllll it is rather chilly out
so we tried for a bit to break the pully bolt loose, and we lost, cracked the pully tho haha take that bitch pully. gonna hit it iwth air tomorrow and in she goes
now with the fun stuff the pictures....
yes im licking my clean harness lol dont ask.
yes the entire wire harness is attached to the motor aside from the injector one, which is completely separate and will be installed tomorrow
Some more quick pics of the start of my brake tuck,still gotta bleed teh system and mount the prop valve, but all the lines are run and done, camera died part way through.
Rear brake lines pulled through
front brake line done
shaved
start of the injector wire harness, its gonna run underneath the manifold and come up to each injector, later on injectors will be flipped and fuel rail notched to fit the plug
mmmm no rust me like
gonna have to change the manifold a bit, need to change the wastegate it doesnt clear the hood and i want to stay stock looking hood. gonna need an aftermarket cross member, thinking of the weir one, but might just go with hasport
the injector harness, was gonna use differnt loom, but i just want it done, didnt have time or money to spend on good loom and i had this stuff laying around aslo some fittings for the block, and oil pan
working 12 hours in brockville, but thursday should be good ill have lots of money to buy what ever im missing, also need to make a fast dump run to clean it out a bit
anyway oil pan finished today, welded and jb welded to be sure....
oil temp sensor and oil return lines
some more work done today, fuel lines, and power wires are done, just need to do grounds, and get a rad and im set.
my new suspension courtesy of Danno
inpart with dannos idea from last year, slightly refined. this is what i started with
and this is what i ended up with
i added more water so its compleatly submerged, and i... agitate it every hour or so, its already solid black, probably doesnt need to stay in there much longer, but im in no rush to install it. so there it will sit till thursday
Author
Topic: Newb here, Start of my build *now with goods* (Read 11183 times)