Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Rob.K]

So i'm running a toyota 3tc motor, they're strong and love the boost. Decided to try using obd1, honda harness and honda dizzy and convert it to efi. Of course i am boosting it too. Made a box for fuel cell and ran the lines through the cabin. Just got going on this recently after school started so I hope she gets finished sooner than later.

this is what it used to look like, changing up the stylings now tho






























peace

[bgdriver]

Nice work! How hard is the Honda dizzy to swap over?

[ratcityrex]

all of it looked ok untill I got to this pic. It screams I have a wide rim, and a narrow tire. That = gay




THe rest was ok, now post some porn!!!

[Rob.K]

all of it looked ok untill I got to this pic. It screams I have a wide rim, and a narrow tire. That = gay

THe rest was ok, now post some nudes!!!

Just wait till the flares are back on, sideskirts on and dumped on it's nuts. It will look hawt!  those wheels on the back are for the front, i have 225's for the rear. 14x10 all around with 205 front and 225 rear. I'd like to get bigger wheels with lower pro and more tire later on, but this is what i have and it was very cheap, gotta make do with it and get some dope wheel fitment.


As for converting the dizzy, it wasn't really that easy, had to cut the 3tc dizzy and make an adapter for it, I might have to make it all again. We'll see how it actually works tho, no one has done it before so I have to experiment a bit.

[marcj]

drifting is gay, mmk?

[Rob.K]

drifting is gay, mmk?

says the guy going in a straight line with a fwd civic, hahaahahah.

[Joseph Davis]

all of it looked ok untill I got to this pic. It screams I have a wide rim, and a narrow tire. That = gay

THe rest was ok, now post some nudes!!!

Just wait till the flares are back on, sideskirts on and dumped on it's nuts. It will look hawt! 

Go buy a VW and fuck teenage boys, you aren't needed here Canadafag.

[BoostForLife]

One would think that a wider wheel is for a wider tires. Just not practical.
You wouldn't run a 4" exhaust and put a single 1.5" in/out muffler at the end.

At least you're using honda parts for EMS, +1 on that and that only.

[dvst8r]

drifting is gay, mmk?

says the guy going in a straight line with a fwd civic, hahaahahah.

Judging by the plates, you are in Alberta. You don't get enough drifting in the 6months of winter???

[Robb]

The holset and honda ems are the only things here I like.

Your shifter is the supreme form of failure.  You sir are a faggot.

[j.h.christ]

Go buy a VW and fuck teenage boys, you aren't needed here Canadafag.

don't encourage him

[ryan89crx]

drifting is gay, mmk?

says the guy going in a straight line with a fwd civic, hahaahahah.

says the guy that needs Honda EMS in order to make power on your mad tyte stretched Toyota

[Rob.K]

I see drift cars aren't welcome here.

I just posted it for the motor and honda tuning system anyways, ignore the rest if you don't like it.

[Rob.K]

drifting is gay, mmk?

says the guy going in a straight line with a fwd civic, hahaahahah.

says the guy that needs Honda EMS in order to make power on your mad tyte stretched Toyota

I don't need it, it's just cheap as fuck and easy to set up and tune.

[malichite]

What should I bring for food to the Dyno meet?

[ratcityrex]

What should I bring for food to the Dyno meet?

WHat?? lol

Wrong one man.....l;ol

[ryan89crx]

What should I bring for food to the Dyno meet?

haha

too many tabs open?

[malichite]

I was just tired of the drifter.

[jeffsciv23]

i like the look of the black one. and im pretty interested to see how this honda ems and dizzy turn out

[Robb]

i like the look of the black one. and im pretty interested to see how this honda ems and dizzy turn out

Its been done to hell.  Theres a whole thread about toyota engines with honda ems on pgmfi forums. Folks have been at this since 2006.  This dude aint the first.

[Rob.K]

i like the look of the black one. and im pretty interested to see how this honda ems and dizzy turn out

Its been done to hell.  Theres a whole thread about toyota engines with honda ems on pgmfi forums. Folks have been at this since 2006.  This dude aint the first.

True that, but it's always been on an overhead cam motor where they could attach the honda dizzzy straight to the exhaust cam with a simple plate on the front. Never seen someone mate one dizzy to another and run it like that. Still not sure how it'll work out, but I thought I'd give it a shot. But ya using honda stuff to run a toyota motor is definitely not a new thing, it's worked very well in the past tho.

[dvst8r]

It's a cool project engine wise, but seriously drifting in Alberta is redundant.

[Joseph Davis]

i like the look of the black one. and im pretty interested to see how this honda ems and dizzy turn out

Its been done to hell.  Theres a whole thread about toyota engines with honda ems on pgmfi forums. Folks have been at this since 2006.  This dude aint the first.

True that, but it's always been on an overhead cam motor where they could attach the honda dizzzy straight to the exhaust cam with a simple plate on the front. Never seen someone mate one dizzy to another and run it like that. Still not sure how it'll work out, but I thought I'd give it a shot.

It'll work fine, but you are turning the rest of your car into a piece of shit.  Seriously, I could care less if it's for WRECKLESS DRIVING (what "drift" was called before weaboo faggots had to try to act like it was a fresh JDM thing, and that is didn't have it's roots in North American hotrod culture) or not, but the supposition that poke and tuck VW rimshit is going to "look hot" completely defeats the function of a pure tech site.

Unplug from the JDM horseshit and put a real tire under the car?  Between vehicle weight and power from that snail you won't have a problem ripping them free.

[CSaddict]

I think the only thing that is more stretched than that tire on that rim is your asshole. You may want to correct that.

[txdohczc]

I think the only thing that is more stretched than that tire on that rim is your asshole. You may want to correct that

what the tire or the ass hole

[t_cel_t]

pretty sweet, my buddy (he was on ohmt) he stuck a d16 dizzy on a 4age and has it running. right now it is running fine on a stock civic ecu its not even chipped yet. its in an 86 hatch

[Rob.K]

Taker easy guys, I'm not just a drift whore, i do a lot of autox and track days. The fronts need a good deal of stretch to actually turn without rubbing, the rear has a good amount of tire for the size. I'll get 16's later on with bigger tires and what not, just using what i have for the moment. The shifter is just funny, but it's the only one i could find with that length, ae86 shifter sits really fucking low and i am tired of it, wanted it up close to the steering wheel.

This is good to hear about the dizzy, I've been worried that it will actually work.

I made an adapter for the honda intake to my motor today, makes things easy for wiring and vacuum placements. A lot less work than making a new intake, plus I don't have a tig welder.


Here's some nice ass for you you cunt fuckers.......

[dvst8r]

Despite your drift tendencies you might do okay around here.

[TTC]

stretch gay, shifter gay,  caman robbie you can't put that shit here and not expect to get assrammed. 

[jeffsciv23]

i think for drifting and auto X your shifter is right about where you need it since you dont want your hand off the wheel for lond and that would be pretty quick. my friend had a donkey dick of a shifter that he had bought for auto X for his ef, looked like he would be changing stations while shifting but its made for being hight up so you can steer faster with both hands unlike straight line driving where it really doesnt matter as much. im still digging the project even tough yotas been ran on honda ems before, plus i like your style of pron. keep up the good work.

my friend was a member of ohmt but not sure if hes here yet, ill try and get a pic of his shifter and post it.