Topic: .bin file/basemap directory (Read 48089 times)

Joseph Davis · « **Reply #30 on:** September 22, 2009, 08:56:44 PM »

I've saved myself countless hours of grief by never using someone else's abortion of a tune as a basemap. I've posted a few of my tunes up so that people could get a look and feel at timing and the shapes of fuel curves - but I don't even use those as basemaps on "similar" setups.

What I will do is a writeup on how to porperly make and tune your own basemap.

TTC · « **Reply #31 on:** September 22, 2009, 09:25:12 PM »

OOOo nice. Minorthreat and I had 3 pitchers of beer and gave me a lesson on some tuning. But i still have quite a few questions, especially regarding things like cold start enrichiment, accel enrichments and shit like that. Low load spark map cells, cruse afrs ect.

Thx jd

d112crzy · « **Reply #32 on:** September 22, 2009, 09:38:42 PM »

Quote from: Joseph Davis on September 22, 2009, 08:56:44 PM

I've saved myself countless hours of grief by never using someone else's abortion of a tune as a basemap. I've posted a few of my tunes up so that people could get a look and feel at timing and the shapes of fuel curves - but I don't even use those as basemaps on "similar" setups.

What I will do is a writeup on how to porperly make and tune your own basemap.

x2. I used to use peoples basemaps when I first got started but I quickly learned that it was 100x easier and faster to make my own.

speedjunky01 · « **Reply #33 on:** September 22, 2009, 11:21:51 PM »

Quote from: Joseph Davis on September 22, 2009, 08:56:44 PM

I've saved myself countless hours of grief by never using someone else's abortion of a tune as a basemap. I've posted a few of my tunes up so that people could get a look and feel at timing and the shapes of fuel curves - but I don't even use those as basemaps on "similar" setups.

What I will do is a writeup on how to porperly make and tune your own basemap.

dooo it

this is much needed info, i kinda just played with mone, hasent blown up yet i see that as a win

i put my bin up there, if some of you kind sirs would take a look at it and shit on the portions that are bad that would be wonderful.

ryan89crx · « **Reply #34 on:** September 23, 2009, 12:42:24 AM »

Quote from: Joseph Davis on September 22, 2009, 08:56:44 PM

What I will do is a writeup on how to porperly make and tune your own basemap.

hell ya! make one for Crome Gold bins

d112crzy · « **Reply #35 on:** September 23, 2009, 12:46:59 AM »

don't think he'll do anything that includes crome.

Joseph Davis · « **Reply #36 on:** September 23, 2009, 01:24:07 PM »

Quote from: d112crzy on September 23, 2009, 12:46:59 AM

don't think he'll do anything that includes crome.

The premise is the same, injector offsets exist on Crome. I can do both.

walter · « **Reply #37 on:** September 24, 2009, 05:33:06 PM »

Quote from: Joseph Davis on September 22, 2009, 08:56:44 PM

I've saved myself countless hours of grief by never using someone else's abortion of a tune as a basemap. I've posted a few of my tunes up so that people could get a look and feel at timing and the shapes of fuel curves - but I don't even use those as basemaps on "similar" setups.

What I will do is a writeup on how to porperly make and tune your own basemap.

DO IT!

d112crzy · « **Reply #38 on:** September 28, 2009, 01:16:16 PM »

someone hacked the page. anyone know how to fix it?

ratcityrex · « **Reply #39 on:** September 28, 2009, 01:44:05 PM »

lol, lo0oks likE A h0nDa tEk kId diD iT lol

Joseph Davis · « **Reply #40 on:** September 28, 2009, 05:42:12 PM »

Most excellently done, Willard. Well played indeed!

Teg2boo · « **Reply #41 on:** September 29, 2009, 09:50:44 AM »

Quote

**Our site is under construction, so bear with us if it seems a little disorganized!**

You look so disorganized!

d112crzy · « **Reply #42 on:** September 29, 2009, 10:52:22 AM »

Fuck you Canadian. I'm learning CSS and html as I go.

Teg2boo · « **Reply #43 on:** September 29, 2009, 11:04:05 AM »

If you need help for something, don't be shy. I'm a programmer and website developer in PHP/MySQL or whatever language/database you use

CSS is a bitch btw.

SloS13 · « **Reply #44 on:** September 29, 2009, 03:46:30 PM »

I'm down for helping too. Needs to have password protected upload or some shit, or a way for an admin to validate an upload and make it public. Files need to have descriptions. Would be nice to have a mysql-driven thing where you can narrow down search results by like MAP sensor type, B,D, etc, and also fuck your mother.

I actually made a .BIN uploading software a while back. I probably got it around here somewhere.

d112crzy · « **Reply #45 on:** September 29, 2009, 10:39:30 PM »

I'll let you guys have a go if you can figure it out. I can give you the info needed to be able to upload it.

SloS13 · « **Reply #46 on:** September 30, 2009, 11:04:51 AM »

Comments/Suggestions? Pardon my erratic note-taking

FileTypes
FTid - autoincrement int
FTName - varchar 50
FTType - varchar 50 (Software, Add-on, BIN, Other)

Softwares
SWid - autoincrement int
SWName - varchar 50 (i.e. Crome, BRE, Uberdata)

Engines
EngineID - autoincrement int
EngineSeries - varchar 10 (B-series, D-series, K-series)

Files
FileID - autoincrement int
FileLocation - varchar 200
FileTypeID - related to FTid
FileSWid - 0 for n/a or related to SWid
FileApproved - boolean
EngineID - 0 for n/a or EngineID
MAPsize - varchar map sensor size
INJsize - varchar injector size
FileDesc - varchar 500 (details of tune)
EngineID - related to EngineID

opening page - shows FileTypes, from there have search box with software type, engine series, list files. Might be nice to have a comment box for each file

d112crzy · « **Reply #47 on:** September 30, 2009, 12:02:15 PM »

I have no idea what any of that means.

Teg2boo · « **Reply #48 on:** September 30, 2009, 01:13:03 PM »

Comments/Suggestions? Pardon my erratic note-taking

FileTypes
FTid - autoincrement SMALLINT
FTName - varchar 50
FTType - varchar 50 (Software, Add-on, BIN, Other)

Softwares
SWid - autoincrement SMALLINT
SWName - varchar 50 (i.e. Crome, BRE, Uberdata)
Software version?

Engines
EngineID - autoincrement int
EngineSeries - varchar 10 (B-series, D-series, K-series)

User
UserId - autoincrement int
UserName - varchar 30
Password - varchar 20
Email - varchar 30
DateRegistered - Date
NbFileUploaded - SMALLINT

Files
FileID - autoincrement int
FileLocation - varchar 200
FileTypeID - related to FTid
FileSWid - 0 for n/a or related to SWid
FileApproved - boolean DEFAULT false just to be sure
EngineID - 0 for n/a or EngineID
MAPsize - FLOAT(2,1)
INJsize - SMALLINT
FileDesc - varchar 500 (details of tune)
EngineID - related to EngineID
DateAdded - Timestamp
UserId - references User

opening page - shows FileTypes, from there have search box with software type, engine series, list files. Might be nice to have a comment box for each file

I agree on the rest.

Joseph Davis · « **Reply #49 on:** September 30, 2009, 01:15:07 PM »

We need provisions for different cars, too. There were Scooby tunes, I'll drop some NisAnd because I'm an intellectual being, in there too.

Teg2boo · « **Reply #50 on:** September 30, 2009, 01:16:45 PM »

EngineId + CarID?

SloS13 · « **Reply #51 on:** October 02, 2009, 10:33:14 AM »

When I get some free time, I'll install SMF at home and see if I can get the code to integrate with RHMT, i.e. use cookies to keep track of user info. With my schedule it might take a while.

Joseph Davis · « **Reply #52 on:** October 02, 2009, 11:17:44 AM »

Quote from: Teg2boo on September 30, 2009, 01:16:45 PM

EngineId + CarID?

Yes please.

You should help me out with this. I did you the favor of taking that shitty cylinder head off your hands, after all.

Teg2boo · « **Reply #53 on:** October 05, 2009, 11:43:11 AM »

Yes, thank you so much for the head! From the tracking number, you should receive it Wednesday.

I can help you on this, no problem, just tell me what you want.

Joseph Davis · « **Reply #54 on:** October 05, 2009, 11:46:09 AM »

A 15 second outline for how to install/configure this PHP script via FTP, or a link to a how-to. I know it's not rocket science, but I work all the time and don't want to waste time.

Teg2boo · « **Reply #55 on:** October 05, 2009, 02:24:43 PM »

Are you talking about phpatm? There is an installation page there: http://phpatm.org/?page_id=13

SloS13 · « **Reply #56 on:** October 05, 2009, 03:04:15 PM »

I've already gotten a chunk of the work done JD. If you want I can send you my source and a script to recreate the mySQL tables.

Joseph Davis · « **Reply #57 on:** October 05, 2009, 03:36:52 PM »

Quote from: SloS13 on October 05, 2009, 03:04:15 PM

I've already gotten a chunk of the work done JD. If you want I can send you my source and a script to recreate the mySQL tables.

Please do.

It's obvious these things are prey to being hacked, and websites go up and down. I'd really like to have two identical archives.

SloS13 · « **Reply #58 on:** October 05, 2009, 07:14:37 PM »

Quote from: Joseph Davis on October 05, 2009, 03:36:52 PM

Quote from: SloS13 on October 05, 2009, 03:04:15 PM
I've already gotten a chunk of the work done JD. If you want I can send you my source and a script to recreate the mySQL tables.

Please do.

It's obvious these things are prey to being hacked, and websites go up and down. I'd really like to have two identical archives.

check your mail

also - if you decide to work with my code, you'll need this: http://www.simplemachines.org/community/index.php?topic=224166.0

Joseph Davis · « **Reply #59 on:** October 05, 2009, 07:28:09 PM »

JESSE WINS NO LESS THAN FOUR INTERNETS!!!!

News:

Author Topic: .bin file/basemap directory (Read 48089 times)