Topic: Fuck You I'm From West Asheville, or JD's build thread. (Read 50902 times)

speedjunky01 · « **Reply #122 on:** July 24, 2009, 09:35:06 PM »

nice the clothes line was a worthy sacrifice

AJxr · « **Reply #123 on:** July 24, 2009, 10:21:22 PM »

nice rad. i picked up what i thought was a scirocco rad when i was at waterfest last weekend but it turned out to be a few inches wider and wont fit behind my backdoor intercooler, must be some newer 1.8t rad. dayum i gots the eye of a tiger.

DmC · « **Reply #124 on:** July 25, 2009, 07:08:48 AM »

Ashville seems a lot like Silver Town. keep on keepin on man.

Teg2boo · « **Reply #125 on:** July 27, 2009, 09:43:56 AM »

I thought I had a lot of stock in my car. I can barely see your passenger seat lol

I need a traction bar like that, stock crossmember is a bitch on Integra. Turbo hit it, downpipe hit it, etc.

I would like to have a rad like that too, mine is all rotten lol

Joseph Davis · « **Reply #126 on:** July 27, 2009, 10:16:31 AM »

My traction bar barely clears a 3" downpipe, I'm pretty sure it's no better than stock.

The radiator bar (what you see) supports my nifty $53 to the door radiator.

ratcityrex · « **Reply #127 on:** July 27, 2009, 05:09:45 PM »

Quote from: AJxr on July 24, 2009, 10:21:22 PM

nice rad. i picked up what i thought was a scirocco rad when i was at waterfest last weekend but it turned out to be a few inches wider and wont fit behind my backdoor intercooler, must be some newer 1.8t rad. dayum i gots the eye of a tiger.

The one you got is for a automatic. Its 26" wide instead of 23"ish
Check my sig for a link to the right one

Quote from: Joseph Davis on July 27, 2009, 10:16:31 AM

My traction bar barely clears a 3" downpipe, I'm pretty sure it's no better than stock.
The radiator bar (what you see) supports my nifty $53 to the door radiator.

Jd What turbo mani are you running on this beast to not have alot of room for a 3" dp?

Joseph Davis · « **Reply #128 on:** July 27, 2009, 05:30:49 PM »

I haven't made a manifold for it yet. The Jimfab traction bar leaves only 3.25-3.50" clearance between it and the lip of the oil pan.

ratcityrex · « **Reply #129 on:** July 27, 2009, 05:43:08 PM »

I thought it was one of weir's traction bar kit.

Joseph Davis · « **Reply #130 on:** July 27, 2009, 06:00:19 PM »

Nope, just his towhook flanges. I already had the Jimfab, and I wanted something to protect the bottom of the radiator/IC/downpipe which the Jimfab isn't designed to do. Plus, a littl extra weight forward of the front wheels doesn't hurt a FWD turbo car (with a drag bias).

AJxr · « **Reply #131 on:** July 27, 2009, 06:06:25 PM »

what are you thinking for manifold?

ratcityrex · « **Reply #132 on:** July 27, 2009, 06:06:53 PM »

Do you have them all the way down? Whats your ground clearance like? Hope the radiator works out well for your setup too.

Joseph Davis · « **Reply #133 on:** July 27, 2009, 06:24:45 PM »

Quote from: AJxr on July 27, 2009, 06:06:25 PM

what are you thinking for manifold?

I want split scroll T67. But, seriously? A .60 trim T3/T04E would probably make me happy at this point. I really like this car and I overbuilt it... as it (my parts pile, anyway) sits it'll be a 600-700 whp piece of shit that disintegrates transmissions and I don't feel like pulling a trans 4-5 times a year to fix it. If it's a mild 450 whp car then it'll still run a mid 10 as well as have quick spool streetcar manners as well as a broad low boost powerband.

Quote from: ratcityrex on July 27, 2009, 06:06:53 PM

Do you have them all the way down? Whats your ground clearance like? Hope the radiator works out well for your setup too.

Yes, and the clearance looks good so far. I don't like slammed cars so what you see is about what I'll rock.

AJxr · « **Reply #134 on:** July 27, 2009, 06:32:51 PM »

i just reskimmed the thread to see if i missed it, but what exactly is going in this car? i see the ls is destined for a beater? i have 2nd degree down syndrome in case you are wondering.

rawr · « **Reply #135 on:** July 27, 2009, 06:35:07 PM »

I doubt anything will make you happy.

Joseph Davis · « **Reply #136 on:** July 27, 2009, 06:43:40 PM »

Quote from: AJxr on July 27, 2009, 06:32:51 PM

i just reskimmed the thread to see if i missed it, but what exactly is going in this car? i see the ls is destined for a beater? i have 2nd degree down syndrome in case you are wondering.

No, you didn't miss it.

Quote from: rawr on July 27, 2009, 06:35:07 PM

I doubt anything will make you happy.

No, nothing ever will, but standing in line behind you for a turn at your mom might make me grin wryly for a few minutes.

89shithatch · « **Reply #137 on:** July 28, 2009, 04:25:15 AM »

your thread needs more delivery.

Zarcorp · « **Reply #138 on:** July 29, 2009, 08:19:12 AM »

Quote from: 89shithatch on July 28, 2009, 04:25:15 AM

your thread needs more delivery.

To the retirement home.

speedjunky01 · « **Reply #139 on:** July 29, 2009, 12:35:37 PM »

BAMP for MOAR progress

Robb · « **Reply #140 on:** July 29, 2009, 12:57:56 PM »

Bump because EP3's are a form of failure.

Teg2boo · « **Reply #141 on:** July 29, 2009, 02:34:39 PM »

Not boosted yet?

rawr · « **Reply #142 on:** July 29, 2009, 03:24:47 PM »

Bump for a 700hp parts pile.

Joseph Davis · « **Reply #143 on:** July 29, 2009, 05:24:16 PM »

Quote from: Robb on July 29, 2009, 12:57:56 PM

Bump because EP3's are a form of failure.

FUCK YOU

junkyard racer · « **Reply #144 on:** July 29, 2009, 09:36:32 PM »

That isnt a cracked windshield that goes from corner to corner is it? If so, id hate to see under that valance thingy.

Ntrain2k · « **Reply #145 on:** August 06, 2009, 09:24:15 PM »

snm95ls · « **Reply #146 on:** August 09, 2009, 11:38:36 PM »

Quote from: Robb on July 29, 2009, 12:57:56 PM

Bump because EP3's are a form of failure.

GTFO!!

Joseph Davis · « **Reply #147 on:** August 10, 2009, 07:25:26 AM »

Quote from: snm95ls on August 09, 2009, 11:38:36 PM

Quote from: Robb on July 29, 2009, 12:57:56 PM
Bump because EP3's are a form of failure.

GTFO!!

Are you defending EP3's in my build thread?? Fuck you!

dvst8r · « **Reply #148 on:** August 10, 2009, 10:22:24 AM »

Quote from: Joseph Davis on August 10, 2009, 07:25:26 AM

Quote from: snm95ls on August 09, 2009, 11:38:36 PM
Quote from: Robb on July 29, 2009, 12:57:56 PM
Bump because EP3's are a form of failure.

GTFO!!

...in my build thread??

Are you still building anything in this thread?

Robb · « **Reply #149 on:** August 10, 2009, 01:22:51 PM »

Every car in my driveway is slower because of JD's EP3. Bumpity.

News:

Author Topic: Fuck You I'm From West Asheville, or JD's build thread. (Read 50902 times)

rawr

rawr

junkyard racer