:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1] 2   Go Down

Author Topic: Engineering is fun :P  (Read 24289 times)

bmcrace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
Engineering is fun :P
« on: July 01, 2009, 03:06:20 AM »
Ok I think I am finally done with plenum and stack design

I am raising the stacks in the plenum so to reduce the overall distance from the tip of the plenum to the head so to fit it in smaller cars better.

Will be standard flanged for 90mm throttle body but can be switched for 105mm throttle body also ;)






Let me know what you laddies think :P

-James
Logged

bmcrace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
Engineering is fun :P
« Reply #1 on: July 01, 2009, 03:06:36 AM »
Ok I think I am finally done with plenum and stack design

I am raising the stacks in the plenum so to reduce the overall distance from the tip of the plenum to the head so to fit it in smaller cars better.

Will be standard flanged for 90mm throttle body but can be switched for 105mm throttle body also ;)









Let me know what you laddies think :P

-James
« Last Edit: July 01, 2009, 11:36:39 AM by bmcrace »
Logged

SDRAWKCAB

  • D series BALLA!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2676
  • Rhino
Re: Engineering is fun :P
« Reply #2 on: July 01, 2009, 03:13:52 AM »
imv pretty sure yoy a cock suckrt theat sells manis beingt sll fucked up
Logged
I have sex like a winning race car.
I always finish first and have left many disappointed.

Sinister

  • insane in the membrane
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 21489
Re: Engineering is fun :P
« Reply #3 on: July 01, 2009, 03:21:01 AM »
Get the fuck outta here.
Logged
Join Date: 12-31-2003
Posts: 20174
3/5/09 - RIP HMT

Sinister

  • insane in the membrane
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 21489
Re: Engineering is fun :P
« Reply #4 on: July 01, 2009, 03:21:27 AM »
Logged
Join Date: 12-31-2003
Posts: 20174
3/5/09 - RIP HMT

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: Engineering is fun :P
« Reply #5 on: July 01, 2009, 03:25:00 AM »
Wasn't he banned, and wtf is with the cross post?
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

Zarcorp

  • RAWR #2
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Not Rawr#2, I think Uffie is awful.
Re: Engineering is fun :P
« Reply #6 on: July 01, 2009, 04:05:45 AM »
That looks gay.
Logged

turbo4life

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1734
Re: Engineering is fun :P
« Reply #7 on: July 01, 2009, 04:12:17 AM »
retarded..  flame the noob.. my brother is a engineer but he cant finish engineering  his honda back together so it will run
Logged
End the fake food.

chris

  • Guest
Re: Engineering is fun :P
« Reply #8 on: July 01, 2009, 04:55:28 AM »
Piss poor welding and ripping people off is even more fun
Logged

Urban Indian

  • Snow Mexican
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3383
Re: Engineering is fun :P
« Reply #9 on: July 01, 2009, 05:20:49 AM »
wtf is with the wierd runner exit into the plenum?
Logged
The clock doesn'#039#039t own me

 Topless chick + dominos pizza + 750hp civic = epic win

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: Engineering is fun :P
« Reply #10 on: July 01, 2009, 06:15:31 AM »
unless you can offer that for like $80 i dont think you will get many sells here, looks cool and it probably flows awesome.
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

CSaddict

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: Engineering is fun :P
« Reply #11 on: July 01, 2009, 06:42:39 AM »
Quality BMC work.




Im still having a hard time with the fact you actually sold this piece of shit to someone.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

weirtech

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2341
    • Weir Technologies Inc.
Re: Engineering is fun :P
« Reply #12 on: July 01, 2009, 08:32:30 AM »
on topic:  james, are you going to do a cfd test on your plenum design?  if so, who are you getting to do it?
Logged

Robb

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4624
  • Meat Popsicle
Re: Engineering is fun :P
« Reply #13 on: July 01, 2009, 09:15:51 AM »
Get the fuck off our board douchewaffle.

-Robb
Logged

blowoff valves are for pussies.

bmcrace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
Re: Engineering is fun :P
« Reply #14 on: July 01, 2009, 10:10:18 AM »
Quote from: CSaddict on July 01, 2009, 06:42:39 AM
Quality BMC work.



Im still having a hard time with the fact you actually sold this piece of shit to someone.

Its a shame you never contacted me or anything about this, had you done so I am sure we could have worked something out.

BTW tubular manifolds bend and conform very easily and will seal off on the head just fine, and after several heat cycles the pipes will normalize to that postion and remain the the shape from there on out..


« Last Edit: July 01, 2009, 10:24:39 AM by bmcrace »
Logged

hatrack48

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 79
  • RHMT in the 303
Re: Engineering is fun :P
« Reply #15 on: July 01, 2009, 11:11:14 AM »
No room for ripoffs here!!  Go back to h-t with your dreams
Logged

90boostdaccord

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4637
Re: Engineering is fun :P
« Reply #16 on: July 01, 2009, 12:30:57 PM »
Quote from: bmcrace on July 01, 2009, 10:10:18 AM
Quote from: CSaddict on July 01, 2009, 06:42:39 AM
Quality BMC work.



Im still having a hard time with the fact you actually sold this piece of shit to someone.

Its a shame you never contacted me or anything about this, had you done so I am sure we could have worked something out.

BTW tubular manifolds bend and conform very easily and will seal off on the head just fine, and after several heat cycles the pipes will normalize to that postion and remain the the shape from there on out..





spoken like a true scammer.

take some fucking pride in your work, don't send out products that look like complete ass.

i've never seen a weir manifold go out like that.
« Last Edit: July 01, 2009, 12:32:33 PM by 90boostdaccord »
Logged

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10831
  • Spreading the rhmt word like PB&J
Re: Engineering is fun :P
« Reply #17 on: July 01, 2009, 12:33:28 PM »
Its funny how one day you dont give a fuck about your customers and then after loosing a few jobs and blowing a bunch of money on crack your back trying to sell shit to your old customers again. What goes around comes around, leave the fab work to your dad, and kill your self off.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

MantisX

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 362
Re: Engineering is fun :P
« Reply #18 on: July 01, 2009, 01:53:11 PM »
Got dayum.
Logged

hatchboy

  • my wife= hotter than a 2 dollar pistol.
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3607
  • Bombs Over Baghdad
Re: Engineering is fun :P
« Reply #19 on: July 01, 2009, 01:53:37 PM »
Hey ya Fuck, GET THE FUCK OFF
Yet ANOTHER person you fucked over for 6 MONTHS with $1200. SAD i had to get ahold of your DADDY to get my money back.
Logged

chris

  • Guest
Re: Engineering is fun :P
« Reply #20 on: July 01, 2009, 01:58:30 PM »
Quote from: t_cel_t on July 01, 2009, 06:15:31 AM
unless you can offer that for like $80 i dont think you will get many sells here, looks cool and it probably flows awesome.



Actually he can offer it for you for 80 dollars sir. It will never show up but yes he will accept your jew cdm offer of 80 dollars



By the way if you have started to pay attention people are making huge #'s here and its not on stock top end parts Sir.
Logged

chris

  • Guest
Re: Engineering is fun :P
« Reply #21 on: July 01, 2009, 02:01:37 PM »
Also an intake manifold is meant to match a cylinder head so on a stock head or your typical ported head a manifold like this will




A. Lose throttle response
B.Torque
c.Shift power curve in the wrong direction
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Engineering is fun :P
« Reply #22 on: July 01, 2009, 02:41:15 PM »
whats up with the double post dude?


i had to merge them.


i know i may have invited you here but i wasnt aware that you were the one that ships out manifolds with flanges that arent true


why would you even ship something out like that?
Quote from: CSaddict on July 01, 2009, 06:42:39 AM
Quality BMC work.




Im still having a hard time with the fact you actually sold this piece of shit to someone.
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

rawr

  • Guest
Re: Engineering is fun :P
« Reply #23 on: July 01, 2009, 02:51:16 PM »
Quote from: bmcrace on July 01, 2009, 10:10:18 AM
Quote from: CSaddict on July 01, 2009, 06:42:39 AM
Quality BMC work.



Im still having a hard time with the fact you actually sold this piece of shit to someone.

Its a shame you never contacted me or anything about this, had you done so I am sure we could have worked something out.

BTW tubular manifolds bend and conform very easily and will seal off on the head just fine, and after several heat cycles the pipes will normalize to that postion and remain the the shape from there on out..




Actually I believe someone paid him to fix it because you wouldn't.
Logged

chris

  • Guest
Re: Engineering is fun :P
« Reply #24 on: July 01, 2009, 03:48:28 PM »
Jay,




This guy ripped off atleast 5 people where in the hell were you. And by rip off not 50 bucks like 1000+ dollar orders


That never showed up!
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Engineering is fun :P
« Reply #25 on: July 01, 2009, 04:01:05 PM »
Quote from: chris M on July 01, 2009, 03:48:28 PM
Jay,




This guy ripped off atleast 5 people where in the hell were you. And by rip off not 50 bucks like 1000+ dollar orders


That never showed up!

He Hotrex them worse then Hotrex :evil:
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

chris

  • Guest
Re: Engineering is fun :P
« Reply #26 on: July 01, 2009, 04:04:18 PM »
Hotrex has A+service compared to this master fab hack master




Amazing his dad actually still lets this fuck use his name.
« Last Edit: July 01, 2009, 04:22:16 PM by chris M »
Logged

MantisX

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 362
Re: Engineering is fun :P
« Reply #27 on: July 01, 2009, 04:06:18 PM »
What an ultra fail.
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Engineering is fun :P
« Reply #28 on: July 01, 2009, 06:59:00 PM »
Anyway, that IM design is junk.  That's innovative placement of the velocity stacks to keep flow from disrupting the adjacent stacks, but each one is shrouded by the side of the IM it is angled toward.

Vizard published practically everything he deduced about flow (and other aspects) 40 years ago and did so in a manner that could be understood easily by your average intelligent gearhead.  Never read the first issue of Hotrod, huh, or taken a non-primadonna attitude to applied theory and design aka reading up on what your betters did before you?
Logged

CSaddict

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: Engineering is fun :P
« Reply #29 on: July 01, 2009, 07:15:24 PM »
James, take your bullshit back to H-T. You were contacted many times on that manifold and basically told the guy tough shit and to get fucked. I had to cut that pile of shit apart and put a new flange on it. Plus I had to finish welding the collector you neglected to weld.

If you think you are going to start drumming business here you are wrong. Aaron and Corey do most of mani slinging here and they actually take pride in their work. DIAF.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.
Pages: [1] 2   Go Up
« previous next »