Topic: 1984 celica rear diff bearings removal (Read 6320 times)

buk9tp · « **on:** July 25, 2009, 02:58:59 AM »

http://forums.celicasupra.com/showthread.php?t=46681

how do i get part number 41301a off the diff?

its 2 bearings on both sides..

tried cutting a beer can and weding between the bearings and plate but no luck

also tried magnet

dont have the proper tools so need to nigger rig it

buk9tp · « **Reply #1 on:** July 25, 2009, 03:01:01 AM »

bearing puller hmmm internet stopped being gay and i looked it up will check tomorrow

unless someone can think of a way to nigger rig it

Conceptz-X · « **Reply #2 on:** July 25, 2009, 09:15:31 AM »

A bearing splitter is usually the tool of choice, if not break/cut the outer race, take your cut off wheel and cut the inner race as much as you can without getting the carrier, then take a chisel and split the inner race, should slide right off.

crttaz · « **Reply #3 on:** July 25, 2009, 10:03:00 AM »

Harbor Freight Lsrge Bearing splitter, $20

E-b0la · « **Reply #4 on:** July 25, 2009, 01:19:08 PM »

just get the proper tool, a puller or splitter.

buk9tp · « **Reply #5 on:** July 25, 2009, 11:51:37 PM »

lmao ended up going to the local bumfuck autozone and they suprisingly carriedthe bearings and only had 3 instock

News:

Author Topic: 1984 celica rear diff bearings removal (Read 6320 times)

buk9tp

1984 celica rear diff bearings removal

buk9tp

Re: 1984 celica rear diff bearings removal

Conceptz-X

Re: 1984 celica rear diff bearings removal

crttaz

Re: 1984 celica rear diff bearings removal

E-b0la

Re: 1984 celica rear diff bearings removal

buk9tp

Re: 1984 celica rear diff bearings removal