:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: EF aftermarket upper control arms  (Read 3401 times)

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
EF aftermarket upper control arms
« on: August 11, 2009, 04:42:23 AM »
so i got the cheap ebay suspension kit and it comes with upper control arms that are a little different then the stockers. the stockers seem to pivot a lot easier. they have like a little sleeve that allows the UCA to pivot, the new afermarket ones dont really work the same. i torqued them to the recommended specs but the fuckers dont move at all. is this right? like i cant move them up or down at all, well i can force it really hard and it moves but it doesnt seem right.
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: EF aftermarket upper control arms
« Reply #1 on: August 11, 2009, 03:59:54 PM »
so you replaced 20 yr old worn out a-arms/bushings with new ones and they seem stiff?  haha  :?:
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: EF aftermarket upper control arms
« Reply #2 on: August 11, 2009, 04:48:40 PM »
there are no bushings like the old ones, just a steel sleeve that doesnt work like the old ones. it doesnt pivot at all
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: EF aftermarket upper control arms
« Reply #3 on: August 11, 2009, 04:56:11 PM »
what? a picture of the two would help alot.
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: EF aftermarket upper control arms
« Reply #4 on: August 11, 2009, 05:01:54 PM »
this is what they should look like.



and here are what the bushing's look like.

Logged

1slow91hf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 283
Re: EF aftermarket upper control arms
« Reply #5 on: August 12, 2009, 11:25:41 AM »
did you put a good poly lube on them when you installed them cause if not it will be tighter then a broke O0 wallet
Logged
boost-booze-boobies, what more to life is there?
Pages: [1]   Go Up
« previous next »