Topic: Probably the Most Bassass Setup You Will Ever See... (Read 19295 times)

DelSlow · « **on:** September 17, 2009, 11:43:30 AM »

Sr20 T25
Log Manifold
6" JRC FMIC
Blitz DD
DSM 450's
Stealthmode Sticker
Crome
AEM UEGO

Questions? Ask.

ApexSilver06MR · « **Reply #1 on:** September 17, 2009, 12:25:33 PM »

Quote from: danwjmu on September 17, 2009, 11:50:33 AM

Holy christ that dp flange is bassass.

+2

pie cuts ftw

Teg2boo · « **Reply #2 on:** September 17, 2009, 01:03:17 PM »

Is there a missing bolt on the turbo flange?

Not the most badass, but badass

SloS13 · « **Reply #3 on:** September 17, 2009, 01:32:00 PM »

I heard that downpipe flange was made from a melted-down Abrams tank. Care to confirm or deny this?

Kickass pie-cuts

88dx · « **Reply #4 on:** September 17, 2009, 01:35:28 PM »

dammm u could have had 10 less pie cuts if the flange wasnt 3" thick

But it dose look badass :yes:

SloS13 · « **Reply #5 on:** September 17, 2009, 01:43:44 PM »

DelSlow · « **Reply #6 on:** September 17, 2009, 02:08:51 PM »

It's not really that big seeming as how its 'hallow' or dished for the wastegate flapper doohicky

AJxr · « **Reply #7 on:** September 17, 2009, 05:05:32 PM »

kick ass, did you do the welding?

deeznutts · « **Reply #8 on:** September 17, 2009, 05:40:53 PM »

Quote from: DelSlow on September 17, 2009, 02:08:51 PM

It's not really that big seeming as how its 'hallow' or dished for the wastegate flapper doohicky

oh ok makes more sense now i was bout to say damn thats a big ass flange and def a nice set up for a d15

DelSlow · « **Reply #9 on:** September 17, 2009, 05:45:12 PM »

Quote from: deeznutts on September 17, 2009, 05:40:53 PM

oh ok makes more sense now i was bout to say damn thats a big ass flange and def a nice set up for a d15

lol Sweet D15 right?

DelSlow · « **Reply #10 on:** September 17, 2009, 05:45:49 PM »

Quote from: AJxr on September 17, 2009, 05:05:32 PM

kick ass, did you do the welding?

No a member on here did...turbob16hatch

walter · « **Reply #11 on:** September 17, 2009, 06:37:28 PM »

that shit looks like mine, with T28 SR20DET ;D

DelSlow · « **Reply #12 on:** September 17, 2009, 06:44:18 PM »

That looks good, thinking about sending my t25 off to have t28 internals. mad nog.

Eggylshatch · « **Reply #13 on:** September 18, 2009, 10:27:55 PM »

Quote from: DelSlow on September 17, 2009, 06:44:18 PM

That looks good, thinking about sending my t25 off to have t28 internals. mad nog.

Why would you do that??? Just get a bigger turbo

DelSlow · « **Reply #14 on:** September 18, 2009, 11:26:27 PM »

for JDM points, why else?

Towdogg · « **Reply #15 on:** September 18, 2009, 11:34:18 PM »

That is a nice set up....

AJxr · « **Reply #16 on:** September 19, 2009, 07:18:14 PM »

i dig it

crttaz · « **Reply #17 on:** September 19, 2009, 11:47:39 PM »

http://www.yellowbullet.com/forum/showthread.php?t=170937

turbob16hatch · « **Reply #18 on:** September 20, 2009, 12:28:18 AM »

yeah there is a local guy that "thinks" he can fit a u-bend in there

, and is being a doushe. so he thought it would be funny to post it up on yb. idk he is old and retarded.

civiceggturbo · « **Reply #19 on:** September 20, 2009, 12:38:36 AM »

shit looks awesome man, that dp must have taken forever though

Teg2boo · « **Reply #20 on:** September 22, 2009, 11:42:22 PM »

Quote from: crttaz on September 19, 2009, 11:47:39 PM

http://www.yellowbullet.com/forum/showthread.php?t=170937

At least they arent all retards.

Who gives a fuck about look

They should take a look at my herpes infected looking welds lol

I sure can't build a piece like that. I always cut the angle on the wrong side. The bad saw don't help too...

malichite · « **Reply #21 on:** September 22, 2009, 11:55:44 PM »

Jesus how long did it take to weld that pic cut.

By the way, can't be most badass. It lacks the single required element of bad ass. I see no ZC!

turbob16hatch · « **Reply #22 on:** September 23, 2009, 01:21:33 AM »

I took a few hours of welding and cutting. biggest pain was fitting it up after every 2 pie cuts to make sure it's going the right direction.

malichite · « **Reply #23 on:** September 23, 2009, 10:52:07 AM »

So did you just give up on getting the bottom bolt in on your downpipe?

turbob16hatch · « **Reply #24 on:** September 23, 2009, 12:05:35 PM »

the short answer is YES...... ;D

silver · « **Reply #25 on:** September 23, 2009, 07:44:57 PM »

Quote from: danwjmu on September 23, 2009, 12:56:33 PM

Stud + nut?

that should work..

turbob16hatch · « **Reply #26 on:** September 24, 2009, 12:12:43 AM »

Quote from: danwjmu on September 23, 2009, 12:56:33 PM

Stud + nut?

Yeah we could fit one it there, but surprisingly it is sealing pretty good and well were lazy. So 4 out of 5 will work.

Stealthmode · « **Reply #27 on:** October 05, 2009, 12:06:39 AM »

There's no doubt the dp is bassass, and as soon as you put the bumper over that Stealthmode sticker your shit's sure to do 6th gear burnouts.

caged · « **Reply #28 on:** October 05, 2009, 03:21:06 AM »

I couldnt believe how much everyone on yellowbullet hated that down pipe?? Untill you have built and used one you cant apreciate how much time and effort went into it. Top work there

crttaz · « **Reply #29 on:** October 05, 2009, 04:49:39 AM »

Why I cross posted the info, once some of the fab folks on YB posted, things got quiet!

Ugly? YES!
Too much time to fab? YES?
Could it be bought? NO!
Is it pretty? NO!

Does it work, HELL YES!

News:

Author Topic: Probably the Most Bassass Setup You Will Ever See... (Read 19295 times)

civiceggturbo