Topic: Some pics of our work at Full Blown Motorsports ***56k beware*** (Read 15729 times)

slappynuts · « **on:** October 06, 2009, 06:09:43 PM »

Since everybody has a pic thread, I figured we'd start one too. :p

This is our honda front facing manifold with matching FMIC (street version):

this is the race version:

This is an evo front face (street version):

Here is a Kia we're working on. He had us make a turbo kit for the Kia powerplant but later on decided he wanted to be "Powered by Honda!" So we opted for a built LS/vtec with a full blown turbo kit.

ratcityrex · « **Reply #1 on:** October 06, 2009, 06:28:40 PM »

looks good

PhilStubbs · « **Reply #2 on:** October 06, 2009, 07:22:12 PM »

am i the only one that doesnt get the front facing turbo setups? i understand getting the air forced into the turbo, but it it worth the tight bends in the downpipe?

im not trying to bash, i just dont see how the benefits outweigh the restrictions.

the quality of work is badass though. cant beat a kia with honda power. lol

Spanish-rice · « **Reply #3 on:** October 06, 2009, 08:59:19 PM »

i guess i dont understand the point of a "street" forward facing turbo setup? a street setup shouldn't involve you worrying about sucking a fucking bird into your turbo

speedjunky01 · « **Reply #4 on:** October 06, 2009, 10:23:07 PM »

Quote from: Spanish-rice on October 06, 2009, 08:59:19 PM

i guess i dont understand the point of a "street" forward facing turbo setup? a street setup shouldn't involve you worrying about sucking a fucking bird into your turbo

filter

the end

but i hear ya, i wouldnt run a front facing turbo on the street rain would not be your friend lol

nice fab work man

toyolla86 · « **Reply #5 on:** October 07, 2009, 09:07:08 AM »

damn son. that shit is sick boyeeeeee.

thats like walking with your balls hangin out of your zipper.

anyone got a pic of that.

SloS13 · « **Reply #6 on:** October 07, 2009, 09:57:34 AM »

beautiful work.

speedjunky01 · « **Reply #7 on:** October 07, 2009, 04:40:57 PM »

Quote from: toyolla86 on October 07, 2009, 09:07:08 AM

damn son. that shit is sick boyeeeeee.

thats like walking with your balls hangin out of your zipper.

anyone got a pic of that.

ban for asking for gay porn

slappynuts · « **Reply #8 on:** October 07, 2009, 07:05:40 PM »

I guess the question would be how much water is bad? Sure if you drive the car into the lake that would be enough to be bad. Alot of people claim water injection is the second coming.

patsmx5 · « **Reply #9 on:** October 07, 2009, 08:13:02 PM »

Quote from: slappynuts on October 07, 2009, 07:05:40 PM

I guess the question would be how much water is bad? Sure if you drive the car into the lake that would be enough to be bad. Alot of people claim water injection is the second coming.

I have zero experience with WI, but.....

My understanding is that if the water isn't atomized well enough, then it can damage the compressor wheel.

SgtB · « **Reply #10 on:** October 07, 2009, 10:29:12 PM »

Go post-turbo with the nozzle if you're worried.

Corey · « **Reply #11 on:** October 08, 2009, 03:54:21 AM »

water/meth injection is supposed to be post turbo anyways.

front facing "street setups" are stupid, IMO, but you build whatever the customers want to pay you to build them so i can knock you for anything. nice fab work either way. im probably going to be doing a front facing DSM setup some point in the coming months, but for a race car.

Joseph Davis · « **Reply #12 on:** October 08, 2009, 05:23:01 PM »

Quote from: slappynuts on October 06, 2009, 06:09:43 PM

That impresses me more than the fab. Any third asshole can weld, but being meticulous enough to make sure the customer's car is protected and double checked is vital.

Quote from: Corey on October 08, 2009, 03:54:21 AM

water/meth injection is supposed to be direct port anyways.

Fixed.

demonboy · « **Reply #13 on:** October 08, 2009, 05:41:43 PM »

Nice welds,

rawr · « **Reply #14 on:** October 08, 2009, 08:30:44 PM »

this car needs a valve cover that says AIDS really huge on it.

Sinister · « **Reply #15 on:** October 08, 2009, 09:29:51 PM »

Quote from: rawr on October 08, 2009, 08:30:44 PM

this car needs a valve cover that says AIDS really huge on it.

Ahh, my chest hurts now. Thanks asshole. hahaha

vtech · « **Reply #16 on:** October 08, 2009, 11:12:00 PM »

very nice work how much will you charge to build me a topmount for a d16?

BoOsTeDtEg81285 · « **Reply #17 on:** October 15, 2009, 03:55:04 AM »

Quote from: rawr on October 08, 2009, 08:30:44 PM

this car needs a valve cover that says AIDS really huge on it.

Bwahahahahahaas!!!!

bigdaddyvtec · « **Reply #18 on:** October 15, 2009, 04:03:07 AM »

Quote from: BoOsTeDtEg81285 on October 15, 2009, 03:55:04 AM

Quote from: rawr on October 08, 2009, 08:30:44 PM

this car needs a valve cover that says AIDS really huge on it.

Bwahahahahahaas!!!!

Speaking of aids wheres your fucking noob post you faggot

Urban Indian · « **Reply #19 on:** October 15, 2009, 05:13:21 AM »

nice work. nice fab.

now where is that valve cover ms paint?

slappynuts · « **Reply #20 on:** October 15, 2009, 09:01:45 AM »

Noob post. Thats funny.

Thats not the motor we are going to be using so no worries about the valve cover.

Joseph Davis · « **Reply #21 on:** October 15, 2009, 09:05:39 AM »

Quote from: slappynuts on October 15, 2009, 09:01:45 AM

Noob post. Thats funny.

He was talking to the other asshole. As far as assholes go, you're welcome here anytime.

slappynuts · « **Reply #22 on:** October 15, 2009, 03:44:44 PM »

Quote from: Joseph Davis on October 15, 2009, 09:05:39 AM

Quote from: slappynuts on October 15, 2009, 09:01:45 AM
Noob post. Thats funny.

He was talking to the other asshole. As far as assholes go, you're welcome here anytime.

But I wana be an asshole ;D

Joseph Davis · « **Reply #23 on:** October 15, 2009, 09:53:24 PM »

Quote from: slappynuts on October 15, 2009, 03:44:44 PM

Quote from: Joseph Davis on October 15, 2009, 09:05:39 AM
Quote from: slappynuts on October 15, 2009, 09:01:45 AM
Noob post. Thats funny.

He was talking to the other asshole. As far as assholes go, you're welcome here anytime.

But I wana be an asshole ;D

Then be a fucking asshole. No one's stopping you.

slappynuts · « **Reply #24 on:** October 16, 2009, 08:05:23 AM »

Quote from: c0mpl3x on October 15, 2009, 10:02:51 PM

I don think that valve cover is going to fit.

slappynuts · « **Reply #25 on:** October 16, 2009, 08:46:48 AM »

Urban Indian · « **Reply #26 on:** October 17, 2009, 05:00:19 PM »

nice work.

You and Passenger should have a build off

slappynuts · « **Reply #27 on:** October 17, 2009, 05:11:37 PM »

I dont have time for that. I have a shit ton of things to make.

slappynuts · « **Reply #28 on:** November 13, 2009, 01:39:12 PM »

Here it is. ;D

video 2009 11 12 16 46 02

Joseph Davis · « **Reply #29 on:** November 13, 2009, 02:00:17 PM »

One starred for lack of nudity.

News:

Author Topic: Some pics of our work at Full Blown Motorsports ***56k beware*** (Read 15729 times)

demonboy

rawr

Author Topic: Some pics of our work at Full Blown Motorsports 56k beware (Read 15729 times)