Topic: ripper/flame thrower vid (Read 10110 times)

speedjunky01 · « **on:** November 03, 2009, 09:24:01 PM »

finaly got a hold of some bkr7e plugs and aped them to .027 and now the car will rev past 4500 and not break up. had to drive an hour to get them but well worth it

tuned in with some ectune goodness, still no motorola 2.5 so i just tuned it using the last column lol

13ish psi running around 11.5-11 filthy rich i know and stock map with 1.25 retard, would like some advice on the map dont know how to post my file though

anyway vids

daytime rhmt z6 turbo
ectune antilag goodness

taking it to the track wednesday, hope i can sqeeze out mid 13's this thing is a fucking PIG for a civic lol

think this about says it all lol

boosted 00 black si · « **Reply #1 on:** November 04, 2009, 12:10:19 AM »

nice!!!!!!!!

speedjunky01 · « **Reply #2 on:** November 04, 2009, 02:09:05 AM »

Quote from: boosted 00 black si on November 04, 2009, 12:10:19 AM

nice!!!!!!!!

:yes:

Urban Indian · « **Reply #3 on:** November 04, 2009, 02:11:12 PM »

sweet

shogun · « **Reply #4 on:** November 04, 2009, 03:53:41 PM »

nice flame thrower

keelay · « **Reply #5 on:** November 04, 2009, 04:57:34 PM »

Gotta love the anti lag. Even at the the long term expense of the turbo

Teg2boo · « **Reply #6 on:** November 04, 2009, 05:59:45 PM »

Thats pimp

Teg2boo · « **Reply #7 on:** November 04, 2009, 06:02:10 PM »

You put pressure on me, I have to make a vid as nice as this one

I'm not straight pipe tho, don't know if flames will come out

speedjunky01 · « **Reply #8 on:** November 04, 2009, 06:29:01 PM »

Quote from: Teg2boo on November 04, 2009, 06:02:10 PM

You put pressure on me, I have to make a vid as nice as this one

I'm not straight pipe tho, don't know if flames will come out

my setup is as fallows

2.5 DP with 5 bolt being help on by 2 bolts others rattleled out lol
3" rc autoworks exhaust tacked together not finish welded, leaking all over the place
3" straight through magnaflow

got a vid during the day where you can actualy see something, will update the 1st post in a minute

rudebwoy · « **Reply #9 on:** November 04, 2009, 06:30:10 PM »

more fuel you add, more flames you see.

speedjunky01 · « **Reply #10 on:** November 04, 2009, 06:32:01 PM »

Quote from: rudebwoy on November 04, 2009, 06:30:10 PM

more fuel you add, more flames you see.

not in my experience, im using ignition cut

i found if i went too far above 40ish fuel values antilag would bog down from too much fuel

Urban Indian · « **Reply #11 on:** November 04, 2009, 07:44:00 PM »

really? I am using 100% fuel value. I might have to dink around with it to get optimal flames

speedjunky01 · « **Reply #12 on:** November 04, 2009, 07:48:21 PM »

Quote from: Urban Indian on November 04, 2009, 07:44:00 PM

really? I am using 100% fuel value. I might have to dink around with it to get optimal flames

IDK man its whats working for me right now, but since im using ignition cut NOT fuel its whatever the fuel is at that rpm+the fuel value added

if your using fuel cut i could see how you need to dump in a lot more fuel to get some flame

Teg2boo · « **Reply #13 on:** November 06, 2009, 12:58:29 AM »

Tomorrow, I'll give it a new try! Lets get the flame war begin

speedjunky01 · « **Reply #14 on:** November 06, 2009, 01:04:38 AM »

Quote from: Teg2boo on November 06, 2009, 12:58:29 AM

Tomorrow, I'll give it a new try! Lets get the flame war begin

if you top my pic, im gonna get one of my old injectors and stick in in the muffler

Teg2boo · « **Reply #15 on:** November 06, 2009, 01:13:24 AM »

I have so many spare injectors, I could do a flame thrower with them

Teg2boo · « **Reply #16 on:** November 06, 2009, 02:54:52 PM »

Really, it doesnt work for me... Maybe the 450cc can put enough fuel?

There are no difference between 45 degree and 1200ms to 50 @ 1300ms

Any value I put, I still don't get more than 3psi of boost $:-\$

You win this round, I didn't even made a vid lol I was disapointed...

speedjunky01 · « **Reply #17 on:** November 06, 2009, 02:59:18 PM »

try less fuel, waaaaayyyy less

Teg2boo · « **Reply #18 on:** November 06, 2009, 03:08:48 PM »

I think the first time I tried it I was at like 300-800, but I don't remember about timing tho... Maybe it was the problem. I eat and I go for another try. I have to drive 10 minutes each time lol...

speedjunky01 · « **Reply #19 on:** November 06, 2009, 03:10:04 PM »

start at like 10 and work your way up by 10

Teg2boo · « **Reply #20 on:** November 06, 2009, 04:43:39 PM »

What retard do you recommend? I tried 45 degree retard from 10 to 100ms. Was not better than what is was 2 posts ago.

Maybe the problem is somewhere else like a big leak or something...

I'll have to buy eCtune.... that's sad

Towdogg · « **Reply #21 on:** November 06, 2009, 07:42:42 PM »

Vids of dirty 3rds outside of the car are a must......

Do work....

speedjunky01 · « **Reply #22 on:** November 07, 2009, 01:03:34 AM »

im at 40, i think the problem is crome uses fuel cut. . . but IDK on come free and my "anti lag" trick it worked just fine and built 8 psi

Teg2boo · « **Reply #23 on:** November 07, 2009, 12:02:30 PM »

Quote from: speedjunky01 on November 07, 2009, 01:03:34 AM

im at 40, i think the problem is crome uses fuel cut. . . but IDK on come free and my "anti lag" trick it worked just fine and built 8 psi

Yeah, that's what makes me wonder the problem might be somewhere else. I'll buy eCtune this week and give it a try.

rudebwoy · « **Reply #24 on:** November 07, 2009, 07:44:05 PM »

I use s300 and uses both ignition and fuel cut, and I still gets the 12" flame out the tail. Anti lag set to 5500-6500 rpms. that means it bounces from 5500-6500, and builds 15 psi fuel enrichemnet set at 55, and ignition at -35 popps real fast.

Teg2boo · « **Reply #25 on:** November 17, 2009, 09:16:23 PM »

I got my eCtune license. I don't think I'll have the time to throw flame tonight, but as soon as I have some time and that my car run ok I'll try it.

I'm in my in my car and it's fucking cold outside... Fucking winter's comming...

Teg2boo · « **Reply #26 on:** November 17, 2009, 10:03:46 PM »

Thing is running good now.

Finnally I tried the anti-lag. Was building a lot of boost compared to crome

Only problem is that the turbo stopped working after that. I was listening metal to metal friction and no 1 psi of boost.

I said to myself if it wanna blow it's gonna blow so I floor it in third and at 6000rpm the turbo started working fine

It was like if the turbo was seized of something... No more anti-lag for now lol Anyway, I did a small burnout yesterday and the clutch is half gone.

speedjunky01 · « **Reply #27 on:** November 17, 2009, 10:42:18 PM »

yeah ectune doesnt fuck around lol glad to hear your linking it, my china man turbo is taking antilag like a champ, blades all look great as of tonight

Teg2boo · « **Reply #28 on:** November 18, 2009, 12:19:39 AM »

Quote from: c0mpl3x on November 17, 2009, 10:56:52 PM

Quote from: Teg2boo on November 17, 2009, 10:03:46 PM
Thing is running good now.

Finnally I tried the anti-lag. Was building a lot of boost compared to crome Only problem is that the turbo stopped working after that. I was listening metal to metal friction and no 1 psi of boost.

I said to myself if it wanna blow it's gonna blow so I floor it in third and at 6000rpm the turbo started working fine

It was like if the turbo was seized of something... No more anti-lag for now lol Anyway, I did a small burnout yesterday and the clutch is half gone.

bent shaft due to massive amounts of surging perhaps?

I hope it's not that. I don't want to buy another turbo until next summer at least. It was popping nice tho

It had also a nice black smoke on the back when I finished lol

speedjunky01 · « **Reply #29 on:** November 18, 2009, 12:25:50 AM »

same with mine, if the exhaust gets hot enough thats how i got the huge flame that black smoke ignites

im building a new DP, adding the 2.5bar and MBC and upping to manly 15-17psi and see how she likes it.

the DP is all whitey bends so its a PAIN to weld/fit i did it all in 15* segments so there are a BUNCH of bends

News:

Author Topic: ripper/flame thrower vid (Read 10110 times)