Topic: oh boy.... MOST POWAR EVERZ (Read 112587 times)

Joseph Davis · « **Reply #30 on:** November 12, 2009, 05:47:41 PM »

You were told early on to shut the fuck up, Dullard.

Joseph Davis · « **Reply #31 on:** November 12, 2009, 05:53:41 PM »

No, you make a very clearcut situation where I can make valid points and offer stern but constructive criticism into one where it's muddy water and a shitfight with no clear resolution. I haven't even checked that thread since I posted and I know how it's gone down. Thanks.

Joseph Davis · « **Reply #32 on:** November 12, 2009, 08:46:39 PM »

Basically you got the thread you wanted?

97Econobox · « **Reply #33 on:** November 12, 2009, 08:50:58 PM »

see now any point you had is irrelevant. they all think your the typical HMT nut swinger. Got all the answers just none of the experience to prove it.

When its Bisi its funny. But if the shoe were on the other foot and some kid was tryin to tell JD how much timing to run on a D casue his friends built 2 of em you would shred him.

snm95ls · « **Reply #34 on:** November 12, 2009, 09:02:08 PM »

The test rid in the oil test that you speak of is not incredibly difficult to replicate.

92CXyD · « **Reply #35 on:** November 12, 2009, 09:42:23 PM »

Bisi 3.6 cam specs. are up.

Lift:
Int: 0.479"
Exh: 0.459"

Duration at .050"
Int: 0.247"
Ext: 0.233"

Advertised Duration:
Int: 0.269"
Ext: 0.252"

snm95ls · « **Reply #36 on:** November 12, 2009, 09:50:26 PM »

Quote from: 92CXyD on November 12, 2009, 09:42:23 PM

Bisi 3.6 cam specs. are up.

Lift:
Int: 0.479"
Exh: 0.459"

Duration at .050"
Int: 0.247"
Ext: 0.233"

Advertised Duration:
Int: 0.269"
Ext: 0.252"

Why are the duration numbers listed in inches?

That makes absofuckinglutely no sense.

Seems pretty somewhat tame to me. What lift number are they using for advertised duration because that is one hell of an aggressive ramp if it is at 0.002" lift ersumshit.

92CXyD · « **Reply #37 on:** November 12, 2009, 09:52:49 PM »

I do not know this is all that is posted in the H-T thread.

danz · « **Reply #38 on:** November 12, 2009, 10:12:10 PM »

fuck that thread is pissing me off. so many nut swingers.

i want bisi to do well, dont doubt that... but all the stupid fucks who think he is god are what piss me off.

just found out today bisimoto wont warranty my cam because its outside of a 30 day time frame.

what the fuck is that fucking bullshit? lol maybe thats why its pissing me off....

danz · « **Reply #39 on:** November 12, 2009, 10:21:12 PM »

and the fuck fact i put so much work into my setup (ok not that much work, but it felt like it since i had to do just about everything twice) and the dude has the nerve to claim his cams only make less power when stupid fucks dont set their valve lash.

fuck

Ntrain2k · « **Reply #40 on:** November 12, 2009, 10:49:33 PM »

Quote from: danz on November 12, 2009, 10:12:10 PM

fuck that thread is pissing me off. so many nut swingers.

just found out today bisimoto wont warranty my cam because its outside of a 30 day time frame.

what the fuck is that fucking bullshit? lol maybe thats why its pissing me off....

I'd post that shit in the thread. Since he has posted so much about how much he takes care of his customers.

Minor Threat · « **Reply #41 on:** November 13, 2009, 01:12:43 AM »

Quote from: Joseph Davis on November 12, 2009, 01:41:51 PM

Quote
[We] saw [the thread], both concluded that [Bisi] is a faggot and that his super cam will really be a crower grind.

Corey · « **Reply #42 on:** November 13, 2009, 05:26:11 AM »

Quote from: danwjmu on November 12, 2009, 10:34:08 PM

Yeah... that valve lash shit boggles me. So what he was saying they had the lash too tight, effectively making the engine have shit compression because the valves stay open. Wouldn't you think someone building an engine for any kind of horsepower would have checked some shit like that? Or am I misunderstanding what he meant by lash?

He claims to bend over backwards for his customers but you say he won't warranty past 30 days?

if his cams are regrinds, hes probably claiming people are just dropping them in the head without tightening the lash.

widebody93 · « **Reply #43 on:** November 13, 2009, 08:08:21 AM »

Quote from: bigdaddyvtec on November 12, 2009, 04:53:34 PM

Quote from: widebody93 on November 12, 2009, 04:30:13 PM
Quote from: Joseph Davis on November 12, 2009, 09:41:09 AM
Quote from: widebody93 on November 12, 2009, 08:20:15 AM
Yeah he will have the same boost creep issue I have with mine as its also a downward 180 off the collector.... I NEED NEW ONE but no funds.... I'm a broken bitch crawling out of debt to be on a cash only basis..... Good find though Spike

Yet you spend a grand on clothing last weekend?
Cracker needed clothes that fit, tired of having to pull my pants up and shirts that are way too large on me. Like you' be shopping for a wig.

The AIDS?

No faggot, I'm now back to 153 pounds and cut, no soda, beef, or fast food for 6 months does that especially while working out and running, NOT TO MENTION the ICE water every mornin

Urban Indian · « **Reply #44 on:** November 13, 2009, 08:18:44 AM »

yup.

Its the ice water

widebody93 · « **Reply #45 on:** November 13, 2009, 08:42:46 AM »

Quote from: Urban Indian on November 13, 2009, 08:18:44 AM

yup.

Its the ice water

Its definately not canadian water

widebody93 · « **Reply #46 on:** November 13, 2009, 08:46:17 AM »

Quote from: danwjmu on November 13, 2009, 08:43:20 AM

Quote from: Urban Indian on November 13, 2009, 08:18:44 AM
yup.

Its the rice intercooler

bigdaddyvtec · « **Reply #47 on:** November 13, 2009, 09:18:05 AM »

Quote from: widebody93 on November 13, 2009, 08:46:17 AM

Quote from: danwjmu on November 13, 2009, 08:43:20 AM
Quote from: Urban Indian on November 13, 2009, 08:18:44 AM
yup.

Its the gay blue dash

widebody93 · « **Reply #48 on:** November 13, 2009, 09:25:29 AM »

Quote from: bigdaddyvtec on November 13, 2009, 09:18:05 AM

Quote from: widebody93 on November 13, 2009, 08:46:17 AM
Quote from: danwjmu on November 13, 2009, 08:43:20 AM
Quote from: Urban Indian on November 13, 2009, 08:18:44 AM
yup.

Its the fat fuck driving a 4 door

bigdaddyvtec · « **Reply #49 on:** November 13, 2009, 09:26:41 AM »

Quote from: widebody93 on November 13, 2009, 09:25:29 AM

Quote from: bigdaddyvtec on November 13, 2009, 09:18:05 AM
Quote from: widebody93 on November 13, 2009, 08:46:17 AM
Quote from: danwjmu on November 13, 2009, 08:43:20 AM
Quote from: Urban Indian on November 13, 2009, 08:18:44 AM
yup.

Its the fat fuck driving a 4 door

You have not deliversd here yet son..... Not in the slightest.

HAHAHHAHAH

92CXyD · « **Reply #50 on:** November 13, 2009, 05:39:56 PM »

Bisi just post a new post.
And the first thing I notice was a lt. blue dash. ;D

Widebody93 I think I found you a buddy. :yes:

trevor72 · « **Reply #51 on:** November 13, 2009, 06:22:41 PM »

cool coil on plug.

92CXyD · « **Reply #52 on:** November 13, 2009, 07:07:39 PM »

Quote from: danwjmu on November 13, 2009, 06:42:31 PM

cool post on pg 6

yeah I just read that testimonial from another dissatisfied customer. ;D

danz · « **Reply #53 on:** November 13, 2009, 09:43:20 PM »

ok i posted in the thread it was eating me up inside.

i kinda feel like a dick smacker for being nice in his d-series.org thread but calling him out on HT but i guess thats how it goes sometimes.

d112crzy · « **Reply #54 on:** November 13, 2009, 09:55:47 PM »

Its time people found out the truth about Bisi's turbo cams.

danz · « **Reply #55 on:** November 13, 2009, 10:17:32 PM »

hopefully he improves his product.

its always nice to have a bigger selection of parts that actually work well

d112crzy · « **Reply #56 on:** November 13, 2009, 10:38:10 PM »

Nut swingers will be nut swingers. And if it's not something that is directly positive, it is called "hating". It's the way of the internets.

It is definitely nice having a some selection of F parts now.

danz · « **Reply #57 on:** November 13, 2009, 10:39:23 PM »

hes a decent person and i get a good vibe from him, but his cam really blew.

what does he expect shipping out cams based on theory only? (aka mine).

he should be chasing ME down for reviews on it since its his business at stake.

d112crzy · « **Reply #58 on:** November 13, 2009, 10:47:42 PM »

Another thing that bugs me about his business are his new helpers. Robert is a fucking idiot. He goes around the internet(mostly cb7tuner) and gives advice. Not only has this nigger not ever built anything, but he was hired as a fucking sales rep, not an engineer.

I asked him a few questions once about wanting to buy a cam for an f22a, then replied by asking me if it was the one with vtec. SRSLY WTF. I raped him an asshole, then told Bisi about it.

The 2nd time he's pissed me off is that he goes off saying that there is no possible way to make 200whp on an 11:1 f22a. Little does he know that 200whp has been had on 10.5:1 and on a mustang dyno to boot.

Joseph Davis · « **Reply #59 on:** November 14, 2009, 12:27:55 AM »

I love everyone in this thread, except for Staleard. You guys make me proud.

News:

Author Topic: oh boy.... MOST POWAR EVERZ (Read 112587 times)