Topic: Who makes the best camshaft for rotories? (Read 8020 times)

Joseph Davis · « **on:** November 13, 2009, 08:37:41 AM »

You see what I did there.

SQ is the SQUAD · « **Reply #1 on:** November 13, 2009, 08:40:54 AM »

toms "orange" series cams are hands down the biggest power makers on the market. we see crazy power/torque spikes with our dyno

97Econobox · « **Reply #2 on:** November 13, 2009, 08:41:59 AM »

Ok so First complaint No peniswhistle brand? Everyone knows they are doing Rotary stuff now and not just Volkswagons. Why would you not go with a Peniswhistle cam?

and

JDSAP

bigdaddyvtec · « **Reply #3 on:** November 13, 2009, 09:24:41 AM »

I loled...
BISI BISI BISI

Best JD poll to date

Joseph Davis · « **Reply #4 on:** November 13, 2009, 09:32:21 AM »

Quote from: danwjmu on November 13, 2009, 08:42:57 AM

<---

You're about to be downgraded from the Staleard to a Henry, motherfucker.

oinesra · « **Reply #5 on:** November 13, 2009, 09:50:16 AM »

All kidding aside. Your best bet is either racingbeat.com, or an aaron cake regrind.

oinesra · « **Reply #6 on:** November 13, 2009, 09:59:34 AM »

Real talk... Say-another-motha-fuckin word. And this shits over.

oinesra · « **Reply #7 on:** November 13, 2009, 10:04:38 AM »

What's your AIM? We can work this out.

E-b0la · « **Reply #8 on:** November 13, 2009, 10:16:55 AM »

tom makes a bitchin cam, although the aaron cake regrind mentioned does sound tempting...

oinesra · « **Reply #9 on:** November 13, 2009, 10:22:17 AM »

I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?

Joseph Davis · « **Reply #10 on:** November 13, 2009, 10:24:01 AM »

You reduce the base circle, so that the lobe is bigger by comparison.

oinesra · « **Reply #11 on:** November 13, 2009, 10:26:07 AM »

I just googled "chillnnsht" and that name is for the admin of 'beastforums.com'

Gross.

oinesra · « **Reply #12 on:** November 13, 2009, 10:37:48 AM »

Who are the other two people with pink top mounts?

97Econobox · « **Reply #13 on:** November 13, 2009, 10:51:46 AM »

Goddamnit Yoseph Davids. You have fucking Henryed me out of my vote for staleard. I did not vote for your cake friend. I voted for our own in house cam master staleard.

Aaron Cake · « **Reply #14 on:** November 13, 2009, 11:01:22 AM »

Fuck you Joseph, my rotary skills are far beyond your realm of knowledge.

bigdaddyvtec · « **Reply #15 on:** November 13, 2009, 11:03:25 AM »

I like pie. Cake is for fags

Avistar23 · « **Reply #16 on:** November 13, 2009, 11:36:25 AM »

I see what your doing here.....you think you can trick us before you know what pistons your using in it ;D :yes:

highroller54 · « **Reply #17 on:** November 13, 2009, 11:40:54 AM »

I phoned our local napa and told the ex GM counterperson who works at napa now that I had a customer with a corvair that needed a lower rad hose and his dad had died so get this done quick, I also told him if he didn't have a listing to phone the chevy dealer and find one. He ended up calling GM and then phoned me back

Robb · « **Reply #18 on:** November 13, 2009, 12:07:56 PM »

How exactly does one post tits OF gtfo???

jarebear667 · « **Reply #19 on:** November 13, 2009, 12:15:21 PM »

hype ARRRRRRRRRRR get some VTEC poppin ON DAT ROTORY

highroller54 · « **Reply #20 on:** November 13, 2009, 01:44:49 PM »

Quote from: Robb on November 13, 2009, 12:07:56 PM

How exactly does one post tits OF gtfo???

I believe jd want you to jiffy marker "gtfo" accross his chest and post pics

Joseph Davis · « **Reply #21 on:** November 13, 2009, 01:46:19 PM »

Quote from: highroller54 on November 13, 2009, 01:44:49 PM

Quote from: Robb on November 13, 2009, 12:07:56 PM
How exactly does one post tits OF gtfo???

I believe jd want you to jiffy marker "gtfo" accross his chest and post pics

FUCK YOU

oinesra · « **Reply #22 on:** November 13, 2009, 02:09:37 PM »

What the fuck is a jiffy marker?

Is that a canadian magic marker

Kain · « **Reply #23 on:** November 13, 2009, 02:10:10 PM »

LURK MOAR!!

random-strike · « **Reply #24 on:** November 13, 2009, 04:10:15 PM »

i make the best one, i sell them for only 100 dollars

Kain · « **Reply #25 on:** November 13, 2009, 04:41:29 PM »

Quote from: oinesra on November 13, 2009, 10:22:17 AM

I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?

they weld new material onto it and grind it to their specs.

Kain · « **Reply #26 on:** November 13, 2009, 05:12:25 PM »

Quote from: danwjmu on November 13, 2009, 04:43:14 PM

I posted that too, but then thought for a second he was trolling and deleted it $:-\$

yah i know.

oinesra · « **Reply #27 on:** November 13, 2009, 05:16:40 PM »

It worked

Corey · « **Reply #28 on:** November 14, 2009, 06:19:15 AM »

Quote from: Kain on November 13, 2009, 04:41:29 PM

Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.

no.

crttaz · « **Reply #29 on:** November 14, 2009, 06:20:53 AM »

Quote from: Corey on November 14, 2009, 06:19:15 AM

Quote from: Kain on November 13, 2009, 04:41:29 PM
Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.

no.

sometimes.

"hardwelded"

News:

Poll

Manufacturer

Author Topic: Who makes the best camshaft for rotories? (Read 8020 times)

oinesra

oinesra

oinesra

oinesra

oinesra

oinesra

oinesra

oinesra