:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: 1 [2]   Go Down

Author Topic: My First Ramhorn  (Read 40943 times)

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: My First Ramhorn
« Reply #30 on: March 19, 2009, 11:28:10 PM »
I use #8 with the Lens unless it is really tight then I have a #6, and a #5. 95% of the time it is a number 8, as with the lens if I need to I can get over 5/8" of tungsten stick out without an issue. This allows me to get into most everywhere with a #8.
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: My First Ramhorn
« Reply #31 on: March 19, 2009, 11:34:18 PM »
Quote from: dvst8r on March 19, 2009, 11:28:10 PM
I use #8 with the Lens unless it is really tight then I have a #6, and a #5. 95% of the time it is a number 8, as with the lens if I need to I can get over 5/8" of tungsten stick out without an issue. This allows me to get into most everywhere with a #8.

do you have a HF TIG too?
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: My First Ramhorn
« Reply #32 on: March 19, 2009, 11:35:53 PM »
No I have a Miller dynasty 200dx
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

ryan89crx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3228
  • 20lbs of love!
Re: My First Ramhorn
« Reply #33 on: March 20, 2009, 03:33:36 PM »
Quote from: malichite on March 18, 2009, 11:32:21 PM
Switching to a gas lense you can run the standard size cup helps a ton.
you run the gas lense on the HF torch, or did you use a different torch as well
Logged
d-series on 20 pounds will turn you out!

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: My First Ramhorn
« Reply #34 on: March 20, 2009, 04:00:41 PM »
I run it on the HF torch
Logged
Quote from: bigdaddyvtec on June 04, 2009, 02:12:56 AM
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: My First Ramhorn
« Reply #35 on: April 17, 2009, 11:19:27 PM »
Still going at this slowly.  Got the downpipe done and wastegate added plus dump tube.  Just have to do some finish welding and it is ready to go  :yes:  Madussa anybody?









Logged
Quote from: bigdaddyvtec on June 04, 2009, 02:12:56 AM
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

Toysrme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 250
Re: My First Ramhorn
« Reply #36 on: April 18, 2009, 12:05:35 AM »
you're boarderline burning it up.
this will sound counter-intuitive, but here you go! - your heat input is fine and could stand to be a little hotter. you're just welding too slowly and the average heat input is becoming way too high as the material heats up.
whatd you use on the strut tower bar? get you some ER80S-2 or ER80S-6.
watch where you are scratching your tungsten. You should scratch inside the weld area prefferably closest to the root as you can.
when you want to stop welding, toss your filler (clip the last inch off before using the rod again) and back off your heat input while you slowly pull your arc away until it goes out. you're probably close to getting star & crater cracking.
remember 10 seconds post flow per 100amps.

pretty good first effort
Logged

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: My First Ramhorn
« Reply #37 on: May 09, 2009, 09:51:56 AM »
Quote from: Toysrme on April 18, 2009, 12:05:35 AM
you're boarderline burning it up.
this will sound counter-intuitive, but here you go! - your heat input is fine and could stand to be a little hotter. you're just welding too slowly and the average heat input is becoming way too high as the material heats up.
whatd you use on the strut tower bar? get you some ER80S-2 or ER80S-6.
watch where you are scratching your tungsten. You should scratch inside the weld area prefferably closest to the root as you can.
when you want to stop welding, toss your filler (clip the last inch off before using the rod again) and back off your heat input while you slowly pull your arc away until it goes out. you're probably close to getting star & crater cracking.
remember 10 seconds post flow per 100amps.

pretty good first effort

i lick ur moms crater crack
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

weirtech

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2341
    • Weir Technologies Inc.
Re: My First Ramhorn
« Reply #38 on: May 09, 2009, 11:06:35 AM »
i use a #12 cup where i can on my gas lense.  if it is a tough to reach spot i'll use a #8 extended cup with a smaller lense.  i'll have to take some pics.
Logged

snoman

  • N00B *Read Intro Sticky*
  • *
  • Offline Offline
  • Posts: 1
Re: My First Ramhorn
« Reply #39 on: May 28, 2009, 01:57:11 AM »
looks great
where did you get the bends?
Logged
Pages: 1 [2]   Go Up
« previous next »