Topic: B16a Turbo, nothing fancy (Read 50278 times)

Teg2boo · « **Reply #30 on:** March 19, 2009, 08:09:51 AM »

You should stop this right now

b20beast · « **Reply #31 on:** March 19, 2009, 12:26:22 PM »

lol

i will weld back the shit

confUsed · « **Reply #32 on:** March 19, 2009, 01:23:41 PM »

PICS!!!

Pootie · « **Reply #33 on:** March 19, 2009, 02:42:19 PM »

Aye boi, Wah de ass you doing here!!
lol

welcome!!

<~ in for results

.. i knewwwww that first pix looked like Trini

b20beast · « **Reply #34 on:** March 19, 2009, 03:25:59 PM »

i wired the resistor box and loomed up the wires

today injectors will go in.

HiProfile · « **Reply #35 on:** March 20, 2009, 05:17:58 AM »

Quote from: b20beast on March 19, 2009, 07:49:20 AM

FUCK
i grininded into the clutch housing
there is a hole, i hope thats okay

So that was your post on H-T? Fawk that's lol.

Post pics of the egay mani, I'd like to know which one it is.

b20beast · « **Reply #36 on:** March 20, 2009, 07:59:31 AM »

it resembles the ugr manifold, but its ebay.
looks identical

its a good design... imo
they are supposed to be ac compatable with a 4bolt turbine housing, and i have a 5bolt.

i will make a spacer, longer bolts, and tilt the radiator

widebody93 · « **Reply #37 on:** March 20, 2009, 08:20:40 AM »

Your off to a good start

KEEP IT GOING and dont get disctracted

b20beast · « **Reply #38 on:** March 20, 2009, 08:23:51 AM »

OH
i forgot to update

oil fittings T'eed into block
Wired in precision 880cc injectors
yesterday

couplers and clamps will arrive next week

got my precision 350hp intercooler and spooling charge piping yesterday

b20beast · « **Reply #39 on:** March 20, 2009, 01:01:02 PM »

get aluminum radiator fixed, welded the tube.

cost $25

getting a spare slave cylinder from a friend.
got longer bolts.

b20beast · « **Reply #40 on:** March 23, 2009, 08:49:18 AM »

Manifold and Turbo Bolted in
Elongated Slave cylinder bolts so i turbo could fit.

Radiator fits good now

Need to make brackets to mount intercooler.
.....heading out to pick up the rest of parts

b20beast · « **Reply #41 on:** March 24, 2009, 10:03:58 PM »

mission accomplished!

started her up she wont start

fuel over rail....

changed one bad injector o ring. and fired right up

tomorrow i will do the down pipe and dump tube

Teg2boo · « **Reply #42 on:** March 24, 2009, 10:06:14 PM »

Words are fucking worthless without pics. Really.

ok

b20beast · « **Reply #43 on:** March 24, 2009, 10:09:59 PM »

i know niggaz soooon!!!!!!!!!!

widebody93 · « **Reply #44 on:** March 24, 2009, 10:15:22 PM »

I must of over looked it..
.
.
.
What engine management again

b20beast · « **Reply #45 on:** March 24, 2009, 10:16:43 PM »

whats engine management???

JK !!ectune !

widebody93 · « **Reply #46 on:** March 24, 2009, 10:34:58 PM »

Nice setup from what pictures that are posted. And nice choice on management

b20beast · « **Reply #47 on:** March 24, 2009, 11:06:47 PM »

thanks bro

b20beast · « **Reply #48 on:** March 28, 2009, 11:24:59 PM »

turbo smokes like a crack whore

here are a few night shots

b20beast · « **Reply #49 on:** March 28, 2009, 11:27:04 PM »

b20beast · « **Reply #50 on:** March 28, 2009, 11:29:39 PM »

evo_lucian · « **Reply #51 on:** March 31, 2009, 05:32:37 PM »

Quote from: b20beast on March 19, 2009, 07:49:20 AM

FUCK
i grininded into the clutch housing
there is a hole, i hope thats okay

damaged the radiator core, and condenser core by mistake
also broke one of the legs on the slave mounting the manifold
turbo touches nipple

im not sure how to fix it with ac

Sounds like the kinda shit i would do

b20beast · « **Reply #52 on:** April 02, 2009, 01:15:55 PM »

pics are up bitches

b20beast · « **Reply #53 on:** April 17, 2009, 11:23:41 AM »

OK
HERE is the long awaited finished product

By jdmking

b20beast · « **Reply #54 on:** April 17, 2009, 11:24:54 AM »

By jdmking

b20beast · « **Reply #55 on:** April 17, 2009, 11:27:34 AM »

By jdmking

b20beast · « **Reply #56 on:** April 27, 2009, 01:59:30 PM »

203WHP 139WTQ

By jdmking at 2009-04-27

fishinfool88 · « **Reply #57 on:** May 07, 2009, 01:11:02 AM »

It seems like the numbers should be higher???

b20beast · « **Reply #58 on:** May 07, 2009, 08:44:15 AM »

ya i know
car wasnt fully tuned.

sure there was more to be made

lilpooh21186 · « **Reply #59 on:** May 07, 2009, 08:50:59 AM »

holy vtec dip nice build power is deff off though

News:

Author Topic: B16a Turbo, nothing fancy (Read 50278 times)