Topic: D16 replacement motor mounts?? (Read 24077 times)

Vagitarian · « **on:** December 08, 2009, 02:05:06 AM »

Are there any companies that make factory motor mounts for the D16a6 in an EF chasiss? My stock mounts are shit, And instead of buying new oems and doing the window weld mod, ar there any nice mount out there for a daily car that bolt the stock motor in place??

I dont need the front mount if it matters

theidealone · « **Reply #1 on:** December 08, 2009, 02:42:03 AM »

Why would you buy new OEMs if you were going to window weld? And yes, companies do make replacements.

chris · « **Reply #2 on:** December 08, 2009, 02:46:06 AM »

hasport

Vagitarian · « **Reply #3 on:** December 08, 2009, 03:48:58 AM »

I was GOING to window weld, but mine have sat for 2 years, and are probly rusty (i havent been back to the car in a while) so Id rather just replace them entirely

Well I found some for $200 from innovative, but I havent seen the car in a while, so I forget what the mounts look like, but are these 3 pieces everything Id need, or would I have to use stock bracketry aswell still??

http://www.innovativemounts.com/ProductDetails.asp?ProductCode=19151

Vagitarian · « **Reply #4 on:** December 08, 2009, 03:49:22 AM »

I seen the hasports aswell, but there like $300 something, for the same product that innovative has

snm95ls · « **Reply #5 on:** December 08, 2009, 04:19:31 AM »

It looks like the replacement mounts will still use the the funky factory bracket on the transmission for the passnenger side mount.

The B swap mounts eliminate that piece.

Vagitarian · « **Reply #6 on:** December 08, 2009, 04:27:25 AM »

Id love a kit that replaced that crap on the tranny aswell, mine has been bent/hit and is pretty rusty and corroded, passed what a coat of tremclad can repair lol

ryan89crx · « **Reply #7 on:** December 08, 2009, 11:33:59 AM »

http://www.explicitspeedperformance.net/MMK.html

ApexSilver06MR · « **Reply #8 on:** December 08, 2009, 12:37:56 PM »

prothane!!!!

Vagitarian · « **Reply #9 on:** December 08, 2009, 01:39:03 PM »

Prothane??

Te explicit speed seem to be complete replacements of that tranny mount aswell, that doesnt use nything stock at all does it othern than hardware

klyph · « **Reply #10 on:** December 08, 2009, 02:54:12 PM »

Delrin.

Hockey pucks.

Do work.

onlyflash944 · « **Reply #11 on:** December 08, 2009, 06:26:49 PM »

rhmt style solid or none at all

Vagitarian · « **Reply #12 on:** December 08, 2009, 07:10:36 PM »

I could never do solid mounts lol, this is a 30km commute daily car, and my stockers are gross and deterierating

klyph · « **Reply #13 on:** December 08, 2009, 07:14:44 PM »

Quote from: Vagitarian on December 08, 2009, 07:10:36 PM

gross and deterierating

The very definition of rHMT.

danz · « **Reply #14 on:** December 08, 2009, 09:05:44 PM »

talking in KM and denying the birth right which is solid mounts?

what

the

fuck

Vagitarian · « **Reply #15 on:** December 08, 2009, 09:55:45 PM »

So is innovative the only $200 option I have then possibly just fab the rest of the tranny mount myself??

PhilStubbs · « **Reply #16 on:** December 08, 2009, 10:29:42 PM »

i like innovative stuff. i have their cable b series tranny into eg kit in my car. works awesome

Vagitarian · « **Reply #17 on:** December 09, 2009, 01:53:07 AM »

I also just heard theres a D->B tranny conversion....... fuck me

PhilStubbs · « **Reply #18 on:** December 09, 2009, 09:24:26 AM »

the only one i have seen was where a guy modified a B tranny to fit a D block. there was no adaptor plate and i think he had a D flywheel modified to work with a B clutch.

link to adaptor?

theidealone · « **Reply #19 on:** December 09, 2009, 02:18:27 PM »

^Friend of mine. He machined the flywheel to fit a twin. LOL. Welded the holes, and drilled/tapped his own on the engine side.

And someone make me a pair of the solid mounts!

(Sides. ED. Seriously. My ZC isnt gangster without them.)

97Econobox · « **Reply #20 on:** December 10, 2009, 11:38:24 AM »

Vagitarian · « **Reply #21 on:** December 10, 2009, 01:23:53 PM »

Looks like all my mounts but the drivers side is gonna be custom anyways now with this B tranny conversion

Anyone have a good place to buy motor mount pieces??

PhilStubbs · « **Reply #22 on:** December 10, 2009, 02:11:00 PM »

this is the best place i have found for random polyurethane bushings

http://www.polybushings.com/

Tom@OCZCTuning · « **Reply #23 on:** December 10, 2009, 10:54:39 PM »

Quote from: Vagitarian on December 10, 2009, 01:23:53 PM

Looks like all my mounts but the drivers side is gonna be custom anyways now with this B tranny conversion

Anyone have a good place to buy motor mount pieces??

you sir are a failure of life!

get a rope and

D

ryan89crx · « **Reply #24 on:** December 10, 2009, 11:00:29 PM »

klyph · « **Reply #25 on:** December 10, 2009, 11:03:31 PM »

S
C
O
U
R
A
G
E

Y
O
U
R
S
E
L
F

F
R
O
M

M
A
K
I
N
G

T
H
O
S
E

D
E
C
I
S
I
O
N
S

I
N

T
H
E

F
U
T
U
R
E

onlyflash944 · « **Reply #26 on:** December 10, 2009, 11:05:02 PM »

a simple scrolling 'e' would have been nice

klyph · « **Reply #27 on:** December 10, 2009, 11:06:25 PM »

Quote from: onlyflash944 on December 10, 2009, 11:05:02 PM

a simple scrolling 'e' would have been nice

E

onlyflash944 · « **Reply #28 on:** December 10, 2009, 11:13:35 PM »

Quote from: klyph on December 10, 2009, 11:06:25 PM

Quote from: onlyflash944 on December 10, 2009, 11:05:02 PM
a simple scrolling 'e' would have been nice
E

what, no ninja edit?

klyph · « **Reply #29 on:** December 10, 2009, 11:19:37 PM »

There was no edit necessary, you got what you asked for.

News:

Author Topic: D16 replacement motor mounts?? (Read 24077 times)

chris