:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: crxvtec91 on August 23, 2010, 03:50:44 PM

Title: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on August 23, 2010, 03:50:44 PM
So a little while back I pick up this 94 4dr ex, pick it up for $500 with the intent to use it as my DD. I pick it up with a good running high mileage z6. The only bad stuff with the car was a blown auto, and the interior smelled super rank :-X.

Over the next few days I rip out the hole interior and super clean it. At the same time I started looking around for a cheap auto trans. I couldn't find anything cheap/clean. Also the thought of driving a auto D didnt sit right.

I started to think why not convert the civic and throw my built motor into it since the crx was a long way from getting onto the road. The best part of this was I had just about everything to convert it. So the start of a sleeper started, well onto the pic's.

Day I got it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31288_.jpg&hash=e775d159633caac1648e8e441808f0e071e9606d)

Had some 3d euros :-X, I replace with some 50/50 I had around.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31276_.jpg&hash=78510e45e764ec2bd657de715efa3de3c50f3248)

Forgot about the 2tone........
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31279_.jpg&hash=705d539d1be828d7b088c375bbbc309c2f9ca0e9)

New motor before going in.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31263_.jpg&hash=375478aa96672ef3ccbd4f00d913726d49e8f3f2)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31265_.jpg&hash=792f9a0a4c8d1fa75e4331ec0e79fefcdaa83c92)


You can never have enough blood during a build. While wheel owns :evil:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31266_.jpg&hash=94832722b378d0f634d189003049b32e5fa5eb56)

Motor is in and running, just need newer pic's.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31267_.jpg&hash=c38e082a29c856c0e4e92eaf2dc75edcf69d6f76)

Decapping injectors.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31268_.jpg&hash=7c9445cbad0cc4b80be737c848b27ed7455ca148)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31269_.jpg&hash=e51b59abe06b739173016784ab4ed36583db0cb4)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_31270_.jpg&hash=e6497775758f3066de2b7da85f1053113e545078)

More updates to come as I build a ac/ps friendly mani. Turbo will be my Hx-35.
Title: Re: The start of a sleeper
Post by: boosted 00 black si on August 23, 2010, 04:00:54 PM
u need boost
Title: Re: The start of a sleeper
Post by: 92CXyD on August 23, 2010, 04:50:05 PM
I like where this build is going. ;D :yes: :noel: :evil:
Title: Re: The start of a sleeper
Post by: bigdaddyvtec on August 23, 2010, 05:07:25 PM
Sleepers......

A new(er) Honduh movement??? 

Sleepy>USDM>JDM>Blue dash??
Title: Re: The start of a sleeper
Post by: ratcityrex on August 23, 2010, 06:54:23 PM
I like!!
Title: Re: The start of a sleeper
Post by: 1991civicsi on August 23, 2010, 07:44:02 PM
nice oil fill cap
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 23, 2010, 11:47:13 PM
u need boost

She coming!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02326.jpg&hash=f398a55709c74602b773a72c92ce6177160e5947)

I like where this build is going. ;D :yes: :noel: :evil:

Look at 30psi from the Hx-35 and a 100shot if I can get it.

Sleepers......

A new(er) Honduh movement??? 

Sleepy>USDM>JDM>Blue dash??

Hey what better way to hurt people feelings :evil:

I like!!

Thanks

nice oil fill cap

 :noel:
Title: Re: The start of a sleeper
Post by: mycarslow on August 24, 2010, 02:10:24 AM
Pretty sweet turbo mani
Title: Re: The start of a sleeper
Post by: SDRAWKCAB on August 24, 2010, 03:07:29 AM
Stock motor?
You should have left the altezzas. Rice is the ultimate sleeper.
nice oil fill cap
Title: Re: The start of a sleeper
Post by: bigdaddyvtec on August 24, 2010, 12:43:58 PM
Lose the wheels.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 24, 2010, 01:03:26 PM
Stock motor?
You should have left the altezzas. Rice is the ultimate sleeper.
nice oil fill cap

It a vitara motor, 59500 cam, some port work to the head, and PB tuning intake mani setup with 74mm tb. I cant stand altezzas :?:

Lose the wheels.

Im thinking about flat blacking them.

Pretty sweet turbo mani

Shit to bad I cant use it....
Title: Re: The start of a sleeper
Post by: Towdogg on August 24, 2010, 01:12:18 PM
What turbo mani is that?  OBX?   Why cant you use it?

Shit sux 4 you....  I just threw away some stock taillights...
Title: Re: The start of a sleeper
Post by: boosted 00 black si on August 24, 2010, 02:37:25 PM
Stock motor?
You should have left the altezzas. Rice is the ultimate sleeper.
nice oil fill cap

It a vitara motor, 59500 cam, some port work to the head, and PB tuning intake mani setup with 74mm tb. I cant stand altezzas :?:

Lose the wheels.

Im thinking about flat blacking them.

Pretty sweet turbo mani

Shit to bad I cant use it....



yeah u can fuck ac and ps
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 24, 2010, 02:48:53 PM
What turbo mani is that?  OBX?   Why cant you use it?

Shit sux 4 you....  I just threw away some stock taillights...

Nope this thing is a solid chunk of steel, weight is about 20-25 lbs easy.



yeah u can fuck ac and ps

Ps can go, want to keep ac.
Title: Re: The start of a sleeper
Post by: snm95ls on August 24, 2010, 03:27:36 PM
Heh.

I like the wheels.

<zips up flamesuit>

Title: Re: The start of a sleeper
Post by: ratcityrex on August 24, 2010, 04:10:15 PM
how much for the mani shipped to 98370? And is it for a 88-91 civic/crx?
Title: Re: The start of a sleeper
Post by: ApexSilver06MR on August 24, 2010, 04:24:33 PM
how much for the mani shipped to 98370? And is it for a 88-91 civic/crx?

2ND DIBS
Title: Re: The start of a sleeper
Post by: bigdaddyvtec on August 24, 2010, 04:58:55 PM
looks like a bmc race flange... nice manifold.
Title: Re: The start of a sleeper
Post by: mycarslow on August 24, 2010, 07:58:49 PM
I'll buy that fucker
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 24, 2010, 10:56:39 PM
how much for the mani shipped to 98370? And is it for a 88-91 civic/crx?

Idk how does $380 ship sound? Its never been run before. I was planing on running it on my crx.
Title: Re: The start of a sleeper
Post by: ratcityrex on August 25, 2010, 12:24:12 AM
how much for the mani shipped to 98370? And is it for a 88-91 civic/crx?

Idk how does $380 ship sound? Its never been run before. I was planing on running it on my crx.

How well does it fit in your crx? I might just take it!
Title: Re: The start of a sleeper
Post by: d112crzy on August 25, 2010, 12:49:00 AM
Love the color and tails. Needs a slight drop that shit would be the perfect DD.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 25, 2010, 12:35:52 PM
how much for the mani shipped to 98370? And is it for a 88-91 civic/crx?

Idk how does $380 ship sound? Its never been run before. I was planing on running it on my crx.

How well does it fit in your crx? I might just take it!

Not sure, my crx is still all aprt and its built motor is now in this car :P

Love the color and tails. Needs a slight drop that shit would be the perfect DD.

I have h&r drop springs ment for a crx, I was thinking about throwing them on. Its ment to drop a crx 1.5", I wonder how low it would make this 4dr?
Title: Re: The start of a sleeper
Post by: ratcityrex on August 25, 2010, 12:46:28 PM
I have h&r drop springs ment for a crx, I was thinking about throwing them on. Its ment to drop a crx 1.5", I wonder how low it would make this 4dr?


I have h&r spring & struts on my crx from a 91 teg. It had the teg dropped about 3"ish But on my crx its just under 1.5"

I would take a guess and say it would drop your 4door a good 3"+
But I would say fuck it throw it on and see how it turns out. You can always change it back.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 25, 2010, 12:59:47 PM
I have h&r drop springs ment for a crx, I was thinking about throwing them on. Its ment to drop a crx 1.5", I wonder how low it would make this 4dr?


I have h&r spring & struts on my crx from a 91 teg. It had the teg dropped about 3"ish But on my crx its just under 1.5"

I would take a guess and say it would drop your 4door a good 3"+
But I would say fuck it throw it on and see how it turns out. You can always change it back.

That is what I was thinking. Ill try it this weekend. I forgot to take a pic's of my home made clutch line :noel:
Title: Re: The start of a sleeper
Post by: AJxr on August 25, 2010, 07:54:24 PM
looks awesome steve.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 25, 2010, 09:08:48 PM
looks awesome steve.

Damn whats up Aj, long time.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 25, 2010, 09:48:59 PM
More pic's!!!!

In and running.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_32497_.jpg&hash=e44d51fa79b7c921e69c13c0b0f6eac07e5da74d)

Clutch line.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_32498_.jpg&hash=820d98e5f66c8d5a9f544938015a195b1d8f31d1)

Another
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_32499_.jpg&hash=804a1034b241acc094713aa49464f2447477a08c)
Title: Re: The start of a sleeper
Post by: DasPoop on August 25, 2010, 10:07:25 PM
flat rate clutch line  :noel:

on another note does the motor flex enough to eventually fuck the line?
My buddie ran a solid line on his ef but motor never lasted long enough to see how long it would last
Title: Re: The start of a sleeper
Post by: snm95ls on August 25, 2010, 10:16:14 PM
Haha.  Gotta love the D17 valve cover.

Title: Re: The start of a sleeper
Post by: crxvtec91 on August 25, 2010, 10:48:58 PM
flat rate clutch line  :noel:

on another note does the motor flex enough to eventually fuck the line?
My buddie ran a solid line on his ef but motor never lasted long enough to see how long it would last

I ran it like this before, I ran it for over 20k. Cant beat $2 bux :yes:

Haha.  Gotta love the D17 valve cover.



The outlet is huge :noel:
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 26, 2010, 10:53:50 PM
Update, took the car out for a test drive today. Runs good, need to set the tps, set ign timing, and chip the ecu to get rid of the auto trans code. There is something wrong with the trans. Makes a weir sound under acceleration, but not when costing.
Title: Re: The start of a sleeper
Post by: 92CXyD on August 27, 2010, 11:36:16 AM
There is something wrong with the trans. Makes a weir sound under acceleration, but not when costing.

I know you were thinking about!!!  ;D
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 27, 2010, 12:30:13 PM
There is something wrong with the trans. Makes a weir sound under acceleration, but not when costing.

I know you were thinking about!!!  ;D

 :noel:

Another pic, my new shfter.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_32727_.jpg&hash=8842077f9a8a8e887828a1c051e3ce01a96e5144)
Title: Re: The start of a sleeper
Post by: Towdogg on August 27, 2010, 12:36:16 PM
Do you have fluid in the tranny....  I had that same sound.....  Then bOOM blew the diff.....  LOL...  Then it still drove another 30 miles...  lol   :yes:

Mine was low on oil...
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 27, 2010, 04:03:11 PM
Do you have fluid in the tranny....  I had that same sound.....  Then bOOM blew the diff.....  LOL...  Then it still drove another 30 miles...  lol   :yes:

Mine was low on oil...

Damn well I know I have about 2-3 qt of 10w 40 in it right now.
Title: Re: The start of a sleeper
Post by: jarebear667 on August 27, 2010, 04:10:53 PM
lookin tits! i should boost my 98 4 door lx haha but i'd rather sell her.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 27, 2010, 04:44:33 PM
lookin tits! i should boost my 98 4 door lx haha but i'd rather sell her.

Boost the fucker!
Title: Re: The start of a sleeper
Post by: chris on August 27, 2010, 05:53:25 PM
I'm going to guess bad input shaft bearing. 20 dollar part pretty simple job just alot of work.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 27, 2010, 08:12:57 PM
I'm going to guess bad input shaft bearing. 20 dollar part pretty simple job just alot of work.

Maybe its kind of loud though....

VID
This is how real man break in motors :noel:
Breaking in new motor (http://www.youtube.com/watch?v=5_yj7pJ2RJ0#normal)
Title: Re: The start of a sleeper
Post by: Towdogg on August 27, 2010, 09:42:30 PM
Can I stop it?...

lol 

Idk man she sounds scared to turn it off till you say....  Good job!   :yes:

Btw...  Nice ripper ...  Should have did moar...
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 27, 2010, 09:58:23 PM
Can I stop it?...

lol 

Idk man she sounds scared to turn it off till you say....  Good job!   :yes:

Btw...  Nice ripper ...  Should have did moar...

Lol thats my lil sis. Would have done more if the car would have stayed :P, next time ill make a burn out box with a lil water :noel:
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 29, 2010, 01:24:18 PM
Time for some more pic's.

Hawk Hp+ pads front and back.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_33338_.jpg&hash=5e04efcab28457b7c512fbfbff0580abdde51610)

Flip nog oil lines :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_33339_.jpg&hash=bd5488cca00ec5f4844b2bddc354f1886de6d233)
Title: Re: The start of a sleeper
Post by: AJxr on August 29, 2010, 07:42:46 PM
looks awesome steve.

Damn whats up Aj, long time.

just been living. got another hatch in the works finally so i figured id browse around and see whats new.
Title: Re: The start of a sleeper
Post by: crxvtec91 on August 30, 2010, 11:14:32 PM
looks awesome steve.

Damn whats up Aj, long time.

just been living. got another hatch in the works finally so i figured id browse around and see whats new.

Do work! Im going to run the intercooler I got off of your a few years back.
Title: Re: The start of a sleeper
Post by: crxvtec91 on September 19, 2010, 12:02:29 AM
Small update, my $50 mani is almost done :noel:
Title: Re: The start of a sleeper
Post by: AJxr on September 22, 2010, 09:22:28 PM
PICS
Title: Re: The start of a sleeper
Post by: speedjunky01 on September 22, 2010, 09:33:20 PM
i have the same HP+ pads


i fucking LOVE them
Title: Re: The start of a sleeper
Post by: crxvtec91 on September 23, 2010, 05:08:27 PM
PICS

Bah fucking low buck mani didnt come out as planned. Shit was sitting to high and would have hit the hood/ stood out :P

Will its come to the point that I have to say FUCK A/C im ripping that shit out, BOOST> a/c!

i have the same HP+ pads


i fucking LOVE them

I haven't put them in yet :P
Title: Re: The start of a sleeper
Post by: crxvtec91 on September 24, 2010, 12:01:04 AM
Pic time!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39652_.jpg&hash=33dd50568cc353de14c2ac7b2cb3f58b19f30e75)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39653_.jpg&hash=4a5d17fbeebe5508097bedca0780b960f015b059)

So I am saying good bye to a/c here is some mock up of the moded mani, dp and turbo setup togeter.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39654_.jpg&hash=c214259808df553448b2da07dcc2a5bfa5428584)

3" dp
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39655_.jpg&hash=c8044deef135e0e0c893012b57c8905a35e7e819)

Baby eater!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39656_.jpg&hash=de5545d1b7f0c3a121e73dadce9fbecd2496e74b)

Almost there.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_39657_.jpg&hash=1c10d66b200be08664f62c933d19268ee6406318)

Just need intercooler pipping and I can get the shit in!
Title: Re: The start of a sleeper Updated 9/24/10
Post by: boosted 00 black si on September 25, 2010, 09:47:59 AM
bout time i told u fuck ac put the pretty topmount on  :noel:
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 26, 2010, 12:14:22 AM
bout time i told u fuck ac put the pretty topmount on  :noel:

Had to mod the top mount to fit, other wise my down pipe would have came out my front bumper :evil:
Title: Re: The start of a sleeper
Post by: crxvtec91 on September 26, 2010, 10:56:21 AM
i have the same HP+ pads


i fucking LOVE them

Just got them in last night, FUCK do they have a mean bite! Fucking pads were out braking my type-r setup on my crx. :o
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 10:55:08 AM
Time for more pic's.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_40560_.jpg&hash=ed2f24227bb174308d7d2a430117b57b6ab4234a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_40561_.jpg&hash=09993e54798e433d91da83813cfedbba32e186cf)

Now the problem, since I had to mod the mani, it kick up the turbo. Got hood?
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_40562_.jpg&hash=88f1804a46b1c9b9359c0241eaa00de8817c7b1d)
Cold side is going to stick out about 3" above the hood......

Not sure what to do.....
Title: Re: The start of a sleeper Updated 9/24/10
Post by: dvst8r on September 27, 2010, 11:05:42 AM
...Not sure what to do.....

Only two options.

A: Cut hood to fit turbo.

B: Re do top mount.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: Eggylshatch on September 27, 2010, 11:09:46 AM
cut the hood and rivet on one of those shitty hood scoops over top of it
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 11:30:59 AM
...Not sure what to do.....

Only two options.

A: Cut hood to fit turbo.

B: Re do top mount.

cut the hood and rivet on one of those shitty hood scoops over top of it

I think im going with option A as I was already planing to do a 3" up pipe using a tb to open it :evil:.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: DasPoop on September 27, 2010, 11:54:14 AM
A turbo hanging out of the hood isnt exactly sleeper
Title: Re: The start of a sleeper Updated 9/24/10
Post by: ratcityrex on September 27, 2010, 11:59:39 AM
A turbo hanging out of the hood isnt exactly sleeper


Sure its still a sleeper.....lol
Just like this crx is a sleeper

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg266.imageshack.us%2Fimg266%2F7391%2Fcrxofdeath9xh.jpg&hash=f922db9d2f027541782213d7fe7d01cdab81a2a3)
Title: Re: The start of a sleeper Updated 9/24/10
Post by: dvst8r on September 27, 2010, 12:00:50 PM
If it has one of those fake air intakes over it, it will be even more sleeper.  :D
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 12:27:53 PM
If it has one of those fake air intakes over it, it will be even more sleeper.  :D

Pic!
Title: Re: The start of a sleeper Updated 9/24/10
Post by: DasPoop on September 27, 2010, 12:57:47 PM
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.thoroughbreddiesel.com%2Faccessory-images%2Flund%2Fhood-scoop-pontiac.jpg&hash=47c5e7e6e7fb730a9b74f41b515305c9a7e8b235)

peel and stick ftw
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 01:07:19 PM
http://cgi.ebay.com/ebaymotors/NEW-Universal-Car-Hood-Scoop-Air-Flow-Vent-Silver-Black-_W0QQcmdZViewItemQQhashZitem335d055a25QQitemZ220603963941QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories (http://cgi.ebay.com/ebaymotors/NEW-Universal-Car-Hood-Scoop-Air-Flow-Vent-Silver-Black-_W0QQcmdZViewItemQQhashZitem335d055a25QQitemZ220603963941QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)

This would work, but its to low.

Heres another one but I think I need something that is 3" tall.....
 http://cgi.ebay.com/ebaymotors/TOYOTA-Turbo-Carbon-Fiber-look-Racing-Air-Hood-Scoop-_W0QQcmdZViewItemQQhashZitem58878dcbc1QQitemZ380231338945QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories (http://cgi.ebay.com/ebaymotors/TOYOTA-Turbo-Carbon-Fiber-look-Racing-Air-Hood-Scoop-_W0QQcmdZViewItemQQhashZitem58878dcbc1QQitemZ380231338945QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
Title: Re: The start of a sleeper Updated 9/24/10
Post by: dvst8r on September 27, 2010, 01:22:44 PM
The carbon fiber one even has mesh to keep small children from being sucked in.  :D
Title: Re: The start of a sleeper Updated 9/24/10
Post by: DasPoop on September 27, 2010, 01:45:36 PM
i bet dat carbon fiberz one adds like 50 hp instantly make the car even more sleeper with  :mexi: vent shades and a big apc sticker on the front window and your last name or the word HONDA in old english on the back
Title: Re: The start of a sleeper Updated 9/24/10
Post by: bigdaddyvtec on September 27, 2010, 03:41:49 PM
Not a sleeper.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 03:45:44 PM
Not a sleeper.

Lol was trying, cutting the hood was plan, but for a up pipe :yes:

The carbon fiber one even has mesh to keep small children from being sucked in.  :D

i bet dat carbon fiberz one adds like 50 hp instantly make the car even more sleeper with  :mexi: vent shades and a big apc sticker on the front window and your last name or the word HONDA in old english on the back

Im looking for something dirt cheap that has enough hight.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: Teg2boo on September 27, 2010, 03:47:38 PM
I have to remove your virtual badge of sleeperness  :-\
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 27, 2010, 04:16:40 PM
I have to remove your virtual badge of sleeperness  :-\

BDV has the ultimate sleeper, I was just trying to keep it clean/ sleeperish, but its starting to get away from that.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: boosted 00 black si on September 27, 2010, 08:22:29 PM
call me
Title: Re: The start of a sleeper Updated 9/24/10
Post by: Teg2boo on September 28, 2010, 09:03:26 AM
I have to remove your virtual badge of sleeperness  :-\

BDV has the ultimate sleeper, I was just trying to keep it clean/ sleeperish, but its starting to get away from that.

Yeah, Brian has a nice HorsePower/Sleeperness ratio lol
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 28, 2010, 11:08:42 AM
call me

I been meaning to, something comes up every time  :P.

I have to remove your virtual badge of sleeperness  :-\

BDV has the ultimate sleeper, I was just trying to keep it clean/ sleeperish, but its starting to get away from that.

Yeah, Brian has a nice HorsePower/Sleeperness ratio lol

Lmao you can say that again, thing looks show room clean with enough power to hurt some vet owners feelings :noel:
Title: Re: The start of a sleeper Updated 9/24/10
Post by: jarebear667 on September 30, 2010, 07:52:05 PM
beat the hood until it fits haha i had to make a little 2X4ISH hump on my eg hood so the turbo wouldnt touch it then i smoothed it out with mud, but idk if you could stretch the metal enough for that one there. mine was only 1/2 inch high or so.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 30, 2010, 08:54:00 PM
beat the hood until it fits haha i had to make a little 2X4ISH hump on my eg hood so the turbo wouldnt touch it then i smoothed it out with mud, but idk if you could stretch the metal enough for that one there. mine was only 1/2 inch high or so.

I thought about that, sounds like more work that I dont want to do :P. Was looking for a lil hump like a crx zc hood.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: DasPoop on September 30, 2010, 11:24:54 PM

 crx zc hood.

 :yes: :yes: :yes:
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on September 30, 2010, 11:59:43 PM

 crx zc hood.

 :yes: :yes: :yes:

I have one for my crx, but not going to hack it up.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: DasPoop on October 01, 2010, 12:21:19 AM
dont blame ya how high is a dsm hump? i would go to the jy with a punch and a coping saw and cut the bitch out then weld her over the hole
Title: Re: The start of a sleeper Updated 9/24/10
Post by: 92CXyD on October 01, 2010, 08:48:46 AM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on October 01, 2010, 02:15:53 PM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0

Theres no way to drop the turbo down that far. Holsets set a bit wired, if it were a different turbo I would be fine. I really dont want to get a different turbo since this one came from the most Og of Og members Abaz himself!
Title: Re: The start of a sleeper Updated 9/24/10
Post by: 92CXyD on October 01, 2010, 02:26:50 PM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0

Theres no way to drop the turbo down that far. Holsets set a bit wired, if it were a different turbo I would be fine. I really dont want to get a different turbo since this one came from the most Og of Og members Abaz himself!

I hope I do not run into this problem when use a Weir log mani, an He351ve, and a 50mm wg.  :?: ;D
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on October 01, 2010, 02:29:25 PM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0

Theres no way to drop the turbo down that far. Holsets set a bit wired, if it were a different turbo I would be fine. I really dont want to get a different turbo since this one came from the most Og of Og members Abaz himself!

I hope I do not run into this problem when use a Weir log mani, an He351ve, and a 50mm wg.  :?: ;D

A friend had a mani ram I tired, shit was almost on the floor. Log mani should be good.
Title: Re: The start of a sleeper Updated 9/24/10
Post by: 92CXyD on October 01, 2010, 02:51:02 PM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0

Theres no way to drop the turbo down that far. Holsets set a bit wired, if it were a different turbo I would be fine. I really dont want to get a different turbo since this one came from the most Og of Og members Abaz himself!

I hope I do not run into this problem when use a Weir log mani, an He351ve, and a 50mm wg.  :?: ;D

A friend had a mani ram I tired, shit was almost on the floor. Log mani should be good.

I kind of have to mount the He351ve high to be above my SC14 s/c, so it blow directly into the s/c.  ;D
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on October 01, 2010, 04:41:33 PM
See if you can redo the top mount short enough to allow you to cut a some hood braces.

Then slam the hood down a couple of times to mark where the hood needs to be bent.

Then hammer with a ball peen and with a dolly. ;D

It looks like you would only have to cut out like 2-3 inches of height of the top mount.

I would love to see build back in a sleeper status but clean.

Nothing like looking and riding in Spiker's car to set some new standards as a RHMT sleeper. ;D :yes: :noel: :evil: O0

Theres no way to drop the turbo down that far. Holsets set a bit wired, if it were a different turbo I would be fine. I really dont want to get a different turbo since this one came from the most Og of Og members Abaz himself!

I hope I do not run into this problem when use a Weir log mani, an He351ve, and a 50mm wg.  :?: ;D

A friend had a mani ram I tired, shit was almost on the floor. Log mani should be good.

I kind of have to mount the He351ve high to be above my SC14 s/c, so it blow directly into the s/c.  ;D

Hum, my setup look good on the stand then I put it on the motor and found the issue :P
Title: Re: The start of a sleeper Updated 9/24/10
Post by: boosted 00 black si on October 28, 2011, 04:56:15 PM
steve ur a pussy we going out 2nite to do some rippers in the holslut ls??????????
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on October 29, 2011, 06:03:40 PM
steve ur a pussy we going out 2nite to do some rippers in the holslut ls??????????

Ripper vids are full of WIN!
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on November 03, 2011, 03:42:18 PM
Update got some more parts :noel:

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_63262_.jpg&hash=81ce80554409b153e0354276a3e7b0bc71104807)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_63240_.jpg&hash=d3f55093ea9f4f99b531f7e3d84f4cdca456dff9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_photobucket_63239_.jpg&hash=b9fafc867337c07786a58b74c6d5dce98cc5430d)

Well the car is now boosted! Yesterday was a long day, but the car is home, I just need to redo the drain fiding and make a dump for the wastegate.

BIG thanks to
boosted 00 black si (pops)- Thanks again for letting me do the install at your place, the parts, and coming to help me out as I broke down at 4am.

zadanator (zade)- Thanks for helping get it done, and being there stuck with me on the side of the road while I changed the return line.

PIC's Later fuckers im tired right now!!!!!!

My quest to NE Rhmt Dyno day 2011

Ok first I want to start of by thanking everyone that has help aloung the way, if it were not for everyone helping I would have never made it.

Thanks to:
Negu- For building the short block and the other tons of hours with the car.
boosted 00 black si (pops)- For letting me do the install at his house/ random parts he just pop up with that I needed.
Zadanator- For the help with the install/ breaking done with me :noel:
JD- For the tuning/ being the best host EVER!!!
Foowee- For fixing my pop of charge piping.
Abaz- For the Hx35 that I got cheap years ago.

A HUGE THANKS to the Redline crew!
Crazy Dave for the welding on the mani when it crack
Travis- for the help/ joking around
Jason- For letting us tune the car super late and letting us use his shop for the meet!

If I forgot anyone thank you to!

Well onto the pic's!!!!!!!!!!!

2 weeks before dyno day, inspecting the 59500 cam
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213036884.jpg&hash=4bf6019ea809321a4e213f845805193763e58fef)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213140746.jpg&hash=72bf01a02b204621a81cd27b560ab3cbfcad5aac)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213149542.jpg&hash=85da21b1f1c9a31ab1bc1da058f750f9884f38ac)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1306016335509.jpg&hash=9f5afe5f3a9f802fe8464202daf5e1730b6ca94d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307214579081.jpg&hash=f9fd88e781a207493203335e51553cc9676eab6e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307214605274.jpg&hash=2e9eb03bad744f98ff4e868614ab9770f216841c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213120359.jpg&hash=8d533533e99a4637ad5795349ba69d4756d7d753)

Needless to say the cam was mint! Even after 10,000 miles she look like new.

Day later I was getting an aliment to make sure she was good to go.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755833031.jpg&hash=e1dc9a33e87e69bb79f604b6fc5b0dd826e9c77f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307660481724.jpg&hash=25f80d1f68eb102bf5ca0aac8c02d6e80f70c5e5)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755670168.jpg&hash=804d8fc2fd5dff70248480aaf17beee7d6d0d511)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755654983.jpg&hash=5c7daa7859a779910b19b779767e93aade9cec39)

The man Nego himself hard at work!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755712308.jpg&hash=fa8af6ce7e0f0775b6176c6e62b0d2a4c8e07495)

Boost gauge installed that same night getting ready for some boost,
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1306815671602.jpg&hash=86461b38da7ff6d6440701174f8a7d96b51e510e)

6/5/2011 Install time!!!!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_18-38-58_412.jpg&hash=69f46100b2a81046c1c15fb2153be302ba32eba1)

Conner of the valve cover was hitting, nothing a cut off wheel couldnt take care of :evil:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_18-39-15_69.jpg&hash=7dced56ee2ff200a0c0692f94f6dfce70b00339c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_18-39-38_77.jpg&hash=2f3f49b4c5721bb46d95d77726749515ebb15cfa)

Fuck your K!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450296091.jpg&hash=2e9f11b470ed494f9685e7353a20a213db041cf6)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450284848.jpg&hash=1dfec2b30869f86bf54c0e2d1b17417b22cb8f4c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450276890.jpg&hash=6189170ded85abafeb4620d810418f3b51ff6780)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213061860.jpg&hash=9dfb654845073852fc7b8da6e2ec661389465334)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_18-41-01_22.jpg&hash=f52abf10ffcc8cef61457af921e4b2afb92bfe56)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755701426.jpg&hash=9bf49cd3c1c76813b7b95b798a7b0471a3fe6c29)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307422503256.jpg&hash=54931c6087ad5e42f50228428046a92cbea71c9a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450222548.jpg&hash=9b32a032fe0fdf183c9fdb658be83ebec7fb372b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450232190.jpg&hash=d55f79d0ef562a46bf3c793ebbe7f46e13ba2673)

IC pipping cock shot curacy of boosted 00 black si (pops)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_18-40-10_219.jpg&hash=8e3f7c9a74fffcf0d5a898c97bb89746da585b3f)

boosted 00 black si (pops) loves Hosluts :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_21-27-58_670.jpg&hash=bcd365faac5b8ec72549aa0267129baa84ebbb05)

Me with the gangster ic hot side pipping, Foowee later fix it. Thanks Foowee
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_22-08-38_917.jpg&hash=2de768fe35a41a2b2aa0536c1fb2616d4de88e25)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-06_02-53-05_205.jpg&hash=becdadad94e12058a21a285b2a18a866472cbca9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307500492480.jpg&hash=1d632d77e5c8d5ad11a62ca8a034d13296e7138b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307500501818.jpg&hash=f5aa245c872430a653d872ab5a52d058b0c6ada5)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755863530.jpg&hash=1e60e55d1ec9c87e15d0d6a1f4f9e2fb2b8f049e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755878292.jpg&hash=1bd7ba4028d4303de1dfdb816568f33b8d92a47f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755890940.jpg&hash=b823f63fc15e6118f2c8aaa195e7108333367b5d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755841801.jpg&hash=54078b0f99c37cc7dc4dc9fd74bab10d34518d3d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307755850724.jpg&hash=0c103f157e6d13a1594501b2abc5770d0c071a62)

Hotside pipping
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F2011-06-05_22-09-18_56.jpg&hash=b804ee7e3116a923bd3e1b5a498b339d2ffb1e39)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213053169.jpg&hash=cf43848a7d952e989ac567fe72ef944c51206712)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307422490087.jpg&hash=6d957ba9cae1ee80d965dd71313f13d83aa89f6a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213096848.jpg&hash=bc50e32d1df8eb7de345f07c29b460b1614c096f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307213110337.jpg&hash=3e9f46e40b303c5a79de19e6deedda62d336ea1a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307450250512.jpg&hash=01683399b54f94d63abaf48af30a930e5b36f320)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307487718640.jpg&hash=9d7827dadb3911e344f852f2204850f07e272950)

Thats it for now!

Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on November 03, 2011, 03:44:44 PM
So the 4dr made a 1500 mile round trip to Rhmt Ne dyno day, also made 408 hp and 370ft/lbs uncorrected at 24psi, Boost controller was max out and could not get the 30psi like I wanted. Even at that power level on the street and a open diff she grabs every gear and harly spins them, meaning she HOOKS!


(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi22.photobucket.com%2Falbums%2Fb314%2Firon_forrix%2FH4x%2F2011-06-18104242.jpg&hash=3dc47eed0ef970da1b3cd5af71843fda6d959666)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3194%2F5864343779_1f6f118c25_b.jpg&hash=5388f2f8da66511b6a7328ba723c49133ff6d18c)

‪NJDyno.WMV‬&rlm; - YouTube (http://www.youtube.com/watch?v=FfxZpWyB4LA#)

Two :bigok: for JD and Redline performance!!!
Title: Re: The start of a sleeper Updated 9/24/10
Post by: crxvtec91 on November 03, 2011, 03:48:45 PM
Ripper vids!!!!!!!!!!!!!!!

‪Ripper vid 1-3 gear‬&rlm; - YouTube (http://www.youtube.com/watch?v=vUDT4AfgXMs#)

‪3-4 gear ripper vid!‬&rlm; - YouTube (http://www.youtube.com/watch?v=NrJDaYJfJ68#)

‪2-4 Gear ripper vid!‬&rlm; - YouTube (http://www.youtube.com/watch?v=qrnQUxsKFmg#)

Lost run
‪Lost race‬&rlm; - YouTube (http://www.youtube.com/watch?v=EKUQjFrSAdU#)

Just a few pic's from NE dyno day

Yes im a slacker, here are some of the pic's I took while down at Ne dyno day!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17185610_Asheville_NorthCarolina_US.jpg&hash=03d2df6b6bb8756d5bda7945527a8d97df88e628)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17192417_Asheville_NorthCarolina_US.jpg&hash=ba12806abd7dc14119d21207e55a12b0dbf7f2c2)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17192509_Asheville_NorthCarolina_US.jpg&hash=124924f1a6218990efe7a069fd06ed07aa08578a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17192650_Asheville_NorthCarolina_US.jpg&hash=fc838c20343802da92e3a2b578c74774f6d74017)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17192854_Asheville_NorthCarolina_US.jpg&hash=387433c458d5ccaad30939b9720cdde68a91f062)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17193008_Asheville_NorthCarolina_US.jpg&hash=c1c79f357e83a57be212c7f8a833b4356d4ac2b9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17193943_Asheville_NorthCarolina_US.jpg&hash=67b0bc3922848f1724b3cb2d0eb2527c49f7a87a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17222807_Asheville_NorthCarolina_US.jpg&hash=bac9343c31f72eac35666a31c3b2a09de5c417d8)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17222830_Asheville_NorthCarolina_US.jpg&hash=f12215bc7f52363adf6cec42977f2942c0ef839e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-17222945_Asheville_NorthCarolina_US.jpg&hash=eb7ae6ede7aa4cac224af0b3b592d1027ee5eb6b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18014337_Asheville_NorthCarolina_US.jpg&hash=7bcbb21f8c9468d8cadd9a566d4f7f792e0b38e5)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18014347_Asheville_NorthCarolina_US.jpg&hash=c5d9d9ce8fb6dde147b45a5b0d01a55a457a1b06)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18124807_NorthCarolina_US.jpg&hash=2e33ba2726e9a5ee1101f5eb0f8d77faafe5c5cc)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18125146_NorthCarolina_US.jpg&hash=c4f1ac3d63f74a27a45c00cef1922b6c9ff66978)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18125155_NorthCarolina_US.jpg&hash=b227d2d8beb0f8498e95b4ed749a9f86160f6bc0)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18125204_NorthCarolina_US.jpg&hash=0c1df5a1ea9b0d620622ebb3e6d8dd010a25fb45)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18125221_NorthCarolina_US.jpg&hash=31319eff7ca67116572693b3ea5afd00cf7ee365)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18160018_NorthCarolina_US.jpg&hash=2c3e8202f37382fc96460227ea43ad92300dfcbe)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18160029_NorthCarolina_US.jpg&hash=1ab555044b053255e62d5961e2d3a2f6d66c0ce9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18160047_NorthCarolina_US.jpg&hash=9e625090af99fe5bb47d4dd967f728089ce6a20f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18160059_NorthCarolina_US.jpg&hash=ba76b2daa0567f53e4cb55be985ddec33881cecf)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18161424_NorthCarolina_US.jpg&hash=3699bfdd4b98e5c777df987f914a835cc0660f43)

Foowee getting everyone drunk
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18161433_NorthCarolina_US.jpg&hash=726c545bca65f52d748420e943c72b506783757d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18161956_NorthCarolina_US.jpg&hash=856225c756bb42f4e5824e0703b826b01eaebe04)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192041_NorthCarolina_US.jpg&hash=fa82bf7e1cd00d80c6c22b84d017d888be852ec9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192052_NorthCarolina_US.jpg&hash=0b7734096dc15be6785b2d853790edb20ece760c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192127_NorthCarolina_US.jpg&hash=51aebf1f97a804914b2f51f3d87e2e8d6e868837)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192140_NorthCarolina_US.jpg&hash=a9af8372b76cbffa4a686b88c8afad29160c4a38)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192217_NorthCarolina_US.jpg&hash=407c6d75bf5395579253ac255a5598a2f3b60546)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192326_NorthCarolina_US.jpg&hash=2d329dca0ccc1001c41c1cef27aaf0b2a8526e2e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18192335_NorthCarolina_US.jpg&hash=57ba5c2bef0d64f0246332932ad27e0c972eb949)

Poor dog, something had bit him good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18204854_NorthCarolina_US.jpg&hash=bc8a9563a44414080d5f54db897f7b041fed97ba)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18204904_NorthCarolina_US.jpg&hash=6c59a218ba744ab55e64eb601103884eec43fcde)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18204917_NorthCarolina_US.jpg&hash=d8bca0a1a4fb9415dbf588dd5bd275da1dbf1ea9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205003_Asheville_NorthCarolina_US.jpg&hash=6f00af80241a0864eabeffaa5eef4d7d352d5032)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205023_Asheville_NorthCarolina_US.jpg&hash=860671da5f27f3974aa4e8e034a2cbc7d8a8f5be)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205423_Asheville_NorthCarolina_US.jpg&hash=dd725d5cc27eb0e165243deef9ea3b506be88e8b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205552_Asheville_NorthCarolina_US.jpg&hash=dc39a25a4f7e1ec3662eeb1515c3c291d1831adb)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205610_Asheville_NorthCarolina_US.jpg&hash=16ebaf56cb84ddd5c0761c7764a5c0f3c8a418cd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205621_Asheville_NorthCarolina_US.jpg&hash=27c50b8a7eb594520febeec4ce44c0cf86f3be90)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205633_Asheville_NorthCarolina_US.jpg&hash=5cae01f30befa48ddbe449a0a37cf2ba91ae9e31)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205724_Asheville_NorthCarolina_US.jpg&hash=795e787e8c1177c99b7999ac9fefacd2226976c9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18205734_Asheville_NorthCarolina_US.jpg&hash=c91ee92aa557576c5880bb01e477c28307d45b42)

The world fast white dude
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18210014_Asheville_NorthCarolina_US.jpg&hash=fcb4dbefdff1050a19ccbb9049529c75842a968b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18210317_Asheville_NorthCarolina_US.jpg&hash=fb12b93bae04c164eea8a4daffcd5282ebd6b38b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18210343_Asheville_NorthCarolina_US.jpg&hash=53c0feadd9dcdb2eb3b93b6ea8f13632bb38cd1d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18210423_Asheville_NorthCarolina_US.jpg&hash=78b48f24aca0fd53028c56506321e6649dace682)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18210529_Asheville_NorthCarolina_US.jpg&hash=0032a6ee5cb7a5899ec2e39a7c929df15b200600)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-18223532_NorthCarolina_US.jpg&hash=81334a5d6c150a071b4387a870c84e174e578639)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19121516_Swannanoa_NorthCarolina_US.jpg&hash=8ffd689985bf56093697031e7e0ce2d04075cf7d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19121525_Swannanoa_NorthCarolina_US.jpg&hash=79030e3e1e47e42f7c4b64138013b3ddaf07c4a9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19121534_Swannanoa_NorthCarolina_US.jpg&hash=1f71264beb463dc377d235a874f267e6a8b9fe76)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19121814_BlackMountain_NorthCarolina_US.jpg&hash=d5e8827bf52a67b0fa413e355fa0535305723343)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19164215_FancyGap_Virginia_US.jpg&hash=5c6d16e4908cd9a0a7e7e5bba304d2ed944e9818)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19164258_FancyGap_Virginia_US.jpg&hash=3b4d9b2def275f27f52acd9f295c6a3bcdb38a0e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19164304_FancyGap_Virginia_US.jpg&hash=f3a00f2b6c3861c746fc695c590aff327d855244)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19170730_FancyGap_Virginia_US.jpg&hash=d9f953fbbdbbc8903917600c19c9aee36dc2b2e4)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19170806_FancyGap_Virginia_US.jpg&hash=5dc1382fa86695efc4101053b79a944d79e2bc29)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19170841_FancyGap_Virginia_US.jpg&hash=0f0d779643170fe087fb09ed452171e318ae5cea)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19170922_FancyGap_Virginia_US.jpg&hash=4689e0b0d663f9455bea6d95e589794ecd647021)

Pick up this little guy on the way back up, named him Joey. He more Gangster then most people, rode back with me 12 hours open down pipe and love it!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19161104_NorthBuckShoals_NorthCarolina_US.jpg&hash=7532de3e59fbf7fc756aa01266cebe0b89bd2301)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19165039_FancyGap_Virginia_US.jpg&hash=5fde66c02a1568e8fbf3afe594d112c4d7df6575)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19165227_FancyGap_Virginia_US.jpg&hash=10c05c9fb5c9a24834e522ec70d83b381daaf48d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19171854_StewartsCreek_NorthCarolina_US.jpg&hash=44380f714b739c773c2d16ff16b89138fab133fc)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19171906_MtAiry_NorthCarolina_US.jpg&hash=ec329ecb2c126f6a7d716611715165bab3e90c5a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19171915_MtAiry_NorthCarolina_US.jpg&hash=53557ec82b45a7fa66757c717042e630f53e63a3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F2011-06-19191111_Burlington_NorthCarolina_US.jpg&hash=30bbb615f232d3fde196920175154481b4cec5f9)

A huge thanks to the whole Redline crew they were the BEST!!!!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F319214_194208623985040_109429169129653_470402_916499166_n.jpg&hash=b90d86cca589fac05f1abeec12ce334e221ea95d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F296477_194208597318376_109429169129653_470401_555736043_n.jpg&hash=f0554894904527626d70303be3674afb80230495)

Motor going into the crx over the winter time with a home made D2B. Low boost setting 408hp at 24psi, cranking her to 35psi and a 120 shot from the direct port kit. Oh BTW show me a B or k with the same power, but more tq?


Title: Re: The start of a sleeper Updated11/3/2011
Post by: crxvtec91 on January 09, 2012, 11:15:30 AM
Small update, I pulled the turbo motor back in September, I replace it with a stroker motor I put together. The motor has around 5,000 miles on it, drives good, runs good, BUT ITS SLOW!

New plans for 2012 is built and boosted for under $500, stay tuned :Jew:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 12, 2012, 01:53:42 PM
Oh shit 2012 is going to be nice. Pic's to come!

Sp far
Fjt longer rods- $200
p2p0 true 75mm vitraras $100
Arp head studs- $90
New obx lsd with the washer changed out- $200

Reusing my top mount, IC and piping, home made oil lines.

All I need now is a flywheel and a lsd clutch disc :noel:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: boosted 00 black si on January 12, 2012, 02:39:32 PM
lets do this just cleaned the garage out :noel:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 12, 2012, 02:53:25 PM
lets do this just cleaned the garage out :noel:

Im going to see if I pull the motor, put it on the stand, and notch it tonight!
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 16, 2012, 02:46:31 PM
I HATE THIS WEATHER!!! But im getting work done!

First up before I can boost anything I need new brakes. My old Hawk HP+ pads were great, but after a few stops from over 130 fade would get bad. Also at this point the pads were shot, having been abused for 18,000 miles it was time to change.

KVR rotors and pads; well onto the pic's!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1616.jpg&hash=d3e0f23ce51439a53615b819f19747d36a967535)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1617.jpg&hash=ef6bdb31d7418d6537ba677a5328bfb1f6771127)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1618.jpg&hash=beb2b01a8cde3185f0c3180476102ac419790e52)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1619.jpg&hash=dba8543fd515d4c29329fc0cb6784e7e0d5b5eb5)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1620.jpg&hash=ff5ca4903ab5ec3a89391b70499ab1ab45b0e64f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1621.jpg&hash=ee545c913951687a7ce85442ddfabd67e0ae65cd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1622.jpg&hash=e44d1887bc921126832baed894f7d59a7776073a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1623.jpg&hash=0dcbc57a6f5ed4c121dc090aa6a17b21b2b7ed10)

The right way to put slotted rotors on
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1624.jpg&hash=b492d5ff4c7b62b0d815ab69c7bc3ebe276a5296)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1625.jpg&hash=a8b58cb38f08bb67d37268a096917435c5bc1ed9)

I think the pads were done!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1626.jpg&hash=941c44e75f89ef203e372d0b1e73a3e03f2b3f6a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1627.jpg&hash=e0ae42298a3f34febec6d773316762a02f4a1ad0)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1628.jpg&hash=772313282c1d3bbe41c4925fa7df649e702b153d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1629.jpg&hash=4f7282e1a3c11ee3a2c30dfd7ebcd8da4cdb97b9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1630.jpg&hash=26ef8d4dfac5352526ddf5db1f75b9b8a4c90106)

Old VS New
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1631.jpg&hash=e08900a618b6e8709643f6af808b9bb508595a7b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1632.jpg&hash=c99056a7a6a33333954f7d208214e285122c418f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1633.jpg&hash=c0ec4e37503dd8dff35fe18d9360099a70b18c64)

A little grease
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1634.jpg&hash=b678bbedbea5608191655ee7f226e2c5e3c4aa23)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1635.jpg&hash=45703c7d76f529a54720779e15a46c60ef129748)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1636.jpg&hash=aafe45c0b10b8a850219bab1a6a347ab770041be)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1637.jpg&hash=b4733512f949e57e34aa7ea60821939084c6b317)

Time for the other side.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1638.jpg&hash=8efd52653f74adb3566b20e53b047de7b78842fd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1639.jpg&hash=bde488726a6f1581f336a0fef72a3bcd6e4468ac)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1640.jpg&hash=72353e005e1a355e4657cd7bc567de99a4f2de49)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1641.jpg&hash=494e1f2cc77c974572d43792560b145a9daa6ed7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1642.jpg&hash=a6aba759ef09f7c6b927d1fa258423c74bba652e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1643.jpg&hash=0f863b6261c28f938ad4605d1cd451f263bbd5f4)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1644.jpg&hash=b92b6b469ab99778b8884d0e32fb203904f36f04)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1645.jpg&hash=c7e8df8cff3589de621821add192a0347eb79446)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1646.jpg&hash=2a057205d992f7f3f6cf1f54672aabd0bf5ee626)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1647.jpg&hash=12308edb6c21aa88b5e00f437f707c0b7b729ba8)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1648.jpg&hash=cf0191f53ec10793e34909e11860134deb1aed34)

Now thats the end of that. Brakes stop good, and so far no fad despite how hard I push them :evil:

Fun stuff, started pulling apart this motor I had laying around. Its a y8 with untold miles. PIC time.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1649.jpg&hash=538f14d2514d5c775dcdbb22101b90bc63e7e40d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1650.jpg&hash=a5853769b0a572c5b185fab8ac8d19cd6c7d90c1)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1651.jpg&hash=f68be4f3f1535c9611c5c8db6707289904069885)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1652.jpg&hash=0f780b03f71ad00d3973ef4f4e4571810d8fe69d)

This is why I think the y motors are stronger in the 500+ range, block casting has no weak link.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1653.jpg&hash=046ccd03a016b0a2211ba2d160d814bf60deff60)

No drain to be filled.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1654.jpg&hash=8e45aba5753b6abb0d86ad16ceeff9f98f2715d0)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1655.jpg&hash=66b18606efb4da0954e8256882d79f53e87e78c8)

Damn anyone ever heard of a oil change, looks like this person never did.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1656.jpg&hash=041958053ad874ca7383197909840c6fb13c8dbb)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1657.jpg&hash=8e42907c6fe45d785264fdb5d9814012ae92bf68)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1658.jpg&hash=4bb979a7fc548114e00aa05eb05bf29faec1beaa)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1659.jpg&hash=a565aca747dace383778da0059fde0d4cefbd2b7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1660.jpg&hash=1b99c4e70e1c2b1bb8d4dc84f36b4142ab0139f5)

I thought for a second this was cast iron......
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1661.jpg&hash=d35420dcd9e631a12ad6b75cbb857da8c764d9f6)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1662.jpg&hash=1f81d058ed05a24274d10e3aab51b463f1a15502)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1663.jpg&hash=143c30cb28950a5b6fd913aedca3360ec01d64f5)

Here you can see before and after.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1664.jpg&hash=75225570258dfb3cefdc39d3b1cd9069a5635f1b)

Oh yea looking better.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1665.jpg&hash=261f544fc761e4833fd37fcafe65b93680bbc43e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1666.jpg&hash=aa43316842483841ae8098bb078dcc12b8cddecd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN1667.jpg&hash=61cc8aa1990988dc112c0395a4a1f7397f651c9f)

At this point I was a few hours in, no heat, my balls where frozen and feet/ hands were num. More to come, oh and I need to put this to use :evil:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F1307487718640.jpg&hash=9d7827dadb3911e344f852f2204850f07e272950)




Title: Re: The start of a sleeper Updated 1/9/2012
Post by: 92CXyD on January 16, 2012, 03:53:34 PM
Lookin' good, in for more.  :noel:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 16, 2012, 04:06:07 PM
Lookin' good, in for more.  :noel:

Shit im in for warmer weather! :?:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: 92CXyD on January 16, 2012, 04:58:22 PM
Lookin' good, in for more.  :noel:

Shit im in for warmer weather! :?:

This is why I'm glad I have a garage and a buddy with shop w/ a lift.  :noel:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 16, 2012, 06:10:02 PM
Lookin' good, in for more.  :noel:

Shit im in for warmer weather! :?:

This is why I'm glad I have a garage and a buddy with shop w/ a lift.  :noel:

Thats why I wanted to build a waste oil heater since I have a ton of waste oil  :P
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: boosted 00 black si on January 16, 2012, 08:42:33 PM
DO WORK!!!!!
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 16, 2012, 09:35:07 PM
DO WORK!!!!!

I think you need to move next door and give me a hand. :noel:
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on January 21, 2012, 12:11:28 AM
Time for some more pic's!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120112_182955.jpg&hash=6b04b5b615d8cabdcbb3af91773d1b18ac6ce1e2)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120112_182922.jpg&hash=5cf555364e6f2d6e45a32deafc030e5553e7f80a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120112_182906.jpg&hash=a992bed877e7d615bc3f5ff7418173a728f2a4b0)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120112_182854.jpg&hash=3b08ab2d78abb44198a8d43fe582df0c9da5a6f9)

Oh damn what we got here.....?

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_172749.jpg&hash=27231f432700dd90b5977a00a1d33c626f5c9e5d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173001.jpg&hash=dbb61c2703231553c8239a08b67418da96061228)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173358.jpg&hash=129c7e9964c9bb47b2918dc42ade66abf2ce60f3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173417.jpg&hash=8737ccbac6b1a7fff04c0e8ef424cb13eba35564)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173431.jpg&hash=58cb9cb0a08e638c4b7d2c2b7c638150124d385e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173551.jpg&hash=745b9535b2701b671daa9455fc262531c21ad200)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FIMG_20120111_173740.jpg&hash=5fb7000363376cef6a2a6a4ba768cb1bcda6b0f3)

Hoping to have the motor and trans done this weekend!
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on February 03, 2012, 08:54:17 AM
Short block is together need to order a few more things and she going to be ready!
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: boosted 00 black si on February 03, 2012, 06:08:03 PM
get her done
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: SloS13 on February 03, 2012, 10:50:10 PM
Can we get more pics of the brake job?   :P
Title: Re: The start of a sleeper Updated 1/9/2012
Post by: crxvtec91 on February 06, 2012, 09:54:54 AM
get her done

Trying, but moving sucks :P

Can we get more pics of the brake job?   :P

Im a pic whore :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 13, 2012, 01:20:55 PM
Moving+ bad weather= fail! OR at least not enough time to work on shit like one would like.

Well fuck it, pic time!

Gapping rings, .018 top and .019 second.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1673.jpg&hash=de6448bf7650d982e383ba8824eb2601e20d8b18)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1674.jpg&hash=e2e746fda9b4784cf9811b2d3d5b23e839cf6904)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1675.jpg&hash=9bd99f76c5c1946469cee5f5cf1649cce446acf7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1676.jpg&hash=52a3fd4b74393c1f4927bd1e4eb049829eca9abe)

Getting the piston and rods ready.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1677.jpg&hash=bafe0da2dee1f56e48159be08e28bf374065a5bf)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1678.jpg&hash=e6b1356cc347c40f737597251010889885db8551)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1679.jpg&hash=5064b5e3a0c21bf6d8e0701454c07f6af8ca67bd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1680.jpg&hash=a55d127e96b104728b0f2f218f81126a3267728b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1681.jpg&hash=582c2a7086fbcd8ed16634ca8423ec6f7cc657fa)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1682.jpg&hash=ca3442f573acf5145ef500d4bef09a72f9e902fc)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1683.jpg&hash=130d025c788136e32b641bf79a7a7086008f237b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1684.jpg&hash=0773393cfe501d4f9b79bd58debd8515d3757fde)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1685.jpg&hash=99492f65b646af9395cce8a3d56cd8150bec7fed)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1686.jpg&hash=c6a4c761c98ab491dc75c589d4119aec3b833c64)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1687.jpg&hash=df82cfb687677019866a81a0ca3a534ecf10fa1a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1688.jpg&hash=89d8e363e6ad0f719f4995bc963ffe345ffe39e8)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1689.jpg&hash=62cbc55c592fde0d7d21aebcc0be7e81648a9bbd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1690.jpg&hash=5e9ec11b68ee05abd38655895cff595c0c8c2b5c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1691.jpg&hash=5635a13ca5216069818f64db6ce034cc5e8e7f35)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1692.jpg&hash=6ef78c3ad2e39e0af8d093ec614810f2a4bf512c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1693.jpg&hash=96ca5eff1f859067807a6ec1f0bd87ba4738ef8a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1694.jpg&hash=41a59ce469ffd1d3a28a67ff2c236a3fd75b297f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1695.jpg&hash=69a61a4b20149126edd11915d6410cde9ec5a1db)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1696.jpg&hash=70166c5015331845304a9b3914af79f19a0a4c7a)

RHMT OWNS YOU FOOLS
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1697.jpg&hash=48be774a7bb48670ef174148939c5282b2ce5cce)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1698.jpg&hash=a937a43c9ef9e08ea4404322ea9a9db0c8ad2165)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1699.jpg&hash=386342ff420f42d305aa541e36ebfd31763678d8)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1700.jpg&hash=11ed1508e3049cb576130436a36aa7c05646ad70)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1701.jpg&hash=276352cac2f635b051759a90e9a2d105d9ba5011)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1702.jpg&hash=24f9543188eff40984c79eb1a39dc40a1d6ef9e4)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1703.jpg&hash=a7f3f1dd3346d00767552fda6c62ec9a5fc016af)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1704.jpg&hash=3b4bdf9f855b8c46f62874bf1d27dcdeff72af22)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1705.jpg&hash=f5a06c05e0613ca67f02bf06abab3ea30a3994dd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1706.jpg&hash=bdf668e9f58978deeb51862cb440062b2e8ceba2)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%25204dr%2FDSCN1707.jpg&hash=9e3c1abb11275976d97ba117264fd99bbc952d98)
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on February 13, 2012, 02:20:21 PM
Nice  :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: DasPoop on February 16, 2012, 12:32:20 AM
what russ said  :noel: what sort of snail will be connected to said bottom end?
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 16, 2012, 11:58:06 AM
what russ said  :noel: what sort of snail will be connected to said bottom end?

Im going to reuse my old top mount and bolt a BW gm-3 I have floating around with some home made oil lines :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: ratcityrex on February 16, 2012, 12:31:41 PM
So your not fins use the holslut?
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 16, 2012, 04:25:10 PM
So your not fins use the holslut?

Project Phoenix http://www.realhomemadeturbo.com/forum/index.php/topic,2444.150.html (http://www.realhomemadeturbo.com/forum/index.php/topic,2444.150.html)

Im going to use it on that, with a new true twin scroll manifold built by me ;DDD
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 29, 2012, 04:16:51 PM
Well I wish I had a better update. I been slowly moving over the last few weeks. I went to move my garage saturday morning and quickly realized the garage had been broken into. They took my big air compressor, all my power tools, all my hand tools, and some misc stuff. The only thing they didnt take was my welder since I had taken it out but they did take the welder gas tank >:(

Its going to be sometime before I can start going again on both my project cars.....
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: ratcityrex on February 29, 2012, 04:18:30 PM
Thats so shitty dude. Did you have your security system recording it?
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 29, 2012, 05:09:13 PM
Thats so shitty dude. Did you have your security system recording it?

I had been out the house for a few days. System got taken down a few days before with out me knowning. I am sure I know who did it, so either im going to get my stuff back or someone going to feel some pain :evil:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 1991civicsi on February 29, 2012, 09:24:17 PM
That sucks royally dude.  :'(
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on February 29, 2012, 10:09:17 PM
That sucks royally dude.  :'(

Tell me about it Joe, crx parts are all scattered around idk what I have or im missing. Only thing it looks like they didnt take any parts just tools. I had 4 turbos, new parts in box's un open, and none of it was even touched.

Hell even my new built motor for the 4dr was in plain sight on the stand and left untouch.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: HiProfile on March 01, 2012, 07:18:04 AM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on March 01, 2012, 09:07:53 AM
I had 4 turbos, new parts in box's un open, and none of it was even touched.

If insurance doesn't help, sell one or more of these, turbos.

What turbos do you have?   :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on March 01, 2012, 11:57:34 AM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P

I had 4 turbos, new parts in box's un open, and none of it was even touched.

If insurance doesn't help, sell one or more of these, turbos.

What turbos do you have?   :noel:

Hx-35, Gm-3, small t3 from a saab, and a volvo turbo.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on March 01, 2012, 12:21:42 PM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P

I had 4 turbos, new parts in box's un open, and none of it was even touched.


If insurance doesn't help, sell one or more of these, turbos.

What turbos do you have?   :noel:

Hx-35, Gm-3, small t3 from a saab, and a volvo turbo.

Damn all too small for what I need.  :-\

Title: Re: The start of a sleeper Updated 2/13/2012
Post by: Tim on March 01, 2012, 12:50:03 PM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P
I'm assuming he means homeowners or renters insurance.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on March 01, 2012, 01:51:11 PM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P

I had 4 turbos, new parts in box's un open, and none of it was even touched.


If insurance doesn't help, sell one or more of these, turbos.

What turbos do you have?   :noel:

Hx-35, Gm-3, small t3 from a saab, and a volvo turbo.

Damn all too small for what I need.  :-\

What you doing?

See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P
I'm assuming he means homeowners or renters insurance.

Nope...
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on March 01, 2012, 02:11:43 PM
See if your insurance covers the tools. Luckily they didn't take the turbos & motor, that shit is less likely to have been covered.

What insurance? Crx hasn't ran since 09 :P

I had 4 turbos, new parts in box's un open, and none of it was even touched.


If insurance doesn't help, sell one or more of these, turbos.

What turbos do you have?   :noel:

Hx-35, Gm-3, small t3 from a saab, and a volvo turbo.

Damn all too small for what I need.  :-\

What you doing?

Looking for  larger turbo for the twincharge setup, if Dv8r is correct, that my He351ve is not enough.  :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: Gold DA9 on March 01, 2012, 03:34:26 PM
looks good coming together.. im kinda pissed at myself for parting out most of my setup.  :'(
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on March 02, 2012, 12:17:20 PM
looks good coming together.. im kinda pissed at myself for parting out most of my setup.  :'(

DO WORK!
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on March 05, 2012, 08:59:48 PM
Small update, I lost second gear about a week ago, and today it manage to rip some teeth off first gear.....

Also found out the y8 head I was planning on using his a few bent valves....

Trying to put in the built motor this weekend but im down no tools, need a y8 head, timing belt and water pump :-X
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on March 05, 2012, 10:34:36 PM
Small update, I lost second gear about a week ago, and today it manage to rip some teeth off first gear....

Also found out the y8 head I was planning on using his a few bent valves....

Trying to put in the built motor this weekend but im down no tools, need a y8 head, timing belt and water pump :-X

Valves, http://www.ebay.com/itm/160706958608?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.com/itm/160706958608?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649) for $94 for all and la p them in with a cordless drill.

Or if ya are really cheap  :mexi: I can ship a couple to ya, LMK.  :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on March 06, 2012, 11:46:38 PM
Small update, I lost second gear about a week ago, and today it manage to rip some teeth off first gear....

Also found out the y8 head I was planning on using his a few bent valves....

Trying to put in the built motor this weekend but im down no tools, need a y8 head, timing belt and water pump :-X

Valves, http://www.ebay.com/itm/160706958608?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.com/itm/160706958608?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649) for $94 for all and la p them in with a cordless drill.

Or if ya are really cheap  :mexi: I can ship a couple to ya, LMK.  :noel:

Thanks Russ, but the valve guids are toast this head is just to beat! Im looking local to see what I can find.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on July 17, 2012, 11:54:34 AM
RIP 4dr :'(
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: boosted 00 black si on July 17, 2012, 04:34:36 PM
fuckers!!!!!
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: Gold DA9 on July 19, 2012, 03:35:04 AM
RIP 4dr :'(

Dislike... what left overs do you have... im tempted to just rock a sohc setup.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: 92CXyD on July 19, 2012, 08:36:57 AM
Ship the pistons and rods out of that, I'll put them to good use in my crx.  :noel:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on July 20, 2012, 12:25:11 AM
RIP 4dr :'(

Dislike... what left overs do you have... im tempted to just rock a sohc setup.

Ship the pistons and rods out of that, I'll put them to good use in my crx.  :noel:

Car got stolen early tuesday morning, found it a few hours later thanks to fb. They only got away with my dead amp and crack sub :P

I thought I wouldnt see the car again, its been a cra :Py week.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: ratcityrex on July 23, 2012, 01:35:13 AM
Fuck man, u lucked out.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on July 23, 2012, 12:00:14 PM
Fuck man, u lucked out.

Shit tell me about it. At this point im on the fence as to if I should keep the car or just sell it off. Can't have a daily that is getting broken into to :-X
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: jdmhatchracer94 on July 23, 2012, 07:10:58 PM
I have some aftermarket valves for a z6/y8.
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on July 23, 2012, 07:28:19 PM
I have some aftermarket valves for a z6/y8.

If I keep it, its getting a semi built f23 boosted :evil:
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: boosted 00 black si on July 24, 2012, 06:53:50 PM
sell it to me ill take car of her
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on July 25, 2012, 12:13:52 AM
sell it to me ill take car of her

Shit you for real?
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: boosted 00 black si on July 25, 2012, 06:25:28 PM
hell yea. i got a extra top :noel:mount
Title: Re: The start of a sleeper Updated 2/13/2012
Post by: crxvtec91 on September 16, 2012, 01:47:39 PM
UPDATE time!

Well after some time JD sent me the graph, I was going to post the correct dyno grapgh that showed the 500hp, but what's the fun in that.

First up is last years chart, non twin scroll manifold:

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F296477_194208597318376_109429169129653_470401_555736043_n.jpg&hash=f0554894904527626d70303be3674afb80230495)

This year twin scroll set:

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FFUCK_YOU.png&hash=b2ed67b70509ca1e091fd2dc6a5b6c08306200ee)