:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1] 2   Go Down

Author Topic: Turbo LEAKING oil  (Read 16856 times)

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Turbo LEAKING oil
« on: March 25, 2009, 09:29:31 PM »
When my car is switched off, oil LEAKS out my garrett t3 t4, by the turbine side where you clock the turbo thru a bolt.

What the hell could be the cause
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Turbo LEAKING oil
« Reply #1 on: March 25, 2009, 09:41:28 PM »
Quote from: b20beast on March 25, 2009, 09:29:31 PM
When my car is switched off, oil LEAKS out my garrett t3 t4, by the turbine side where you clock the turbo thru a bolt.

What the hell could be the cause

Seals could be going? Rip off the compressor housing and take a took.
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #2 on: March 25, 2009, 09:43:51 PM »
new bearings and seals
but why would it leak when car is off?
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Turbo LEAKING oil
« Reply #3 on: March 25, 2009, 09:45:07 PM »
Quote from: b20beast on March 25, 2009, 09:43:51 PM
new bearings and seals
but why would it leak when car is off?

Im sure it leaks when it is on. Obviously it is leaking on the cold side
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #4 on: March 25, 2009, 09:49:06 PM »
i meant to say leaks on exhaust side

where to clock the exhaust bolts sorry.


only in and out play, no left to right
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Turbo LEAKING oil
« Reply #5 on: March 25, 2009, 09:49:54 PM »
Quote from: b20beast on March 25, 2009, 09:49:06 PM
i meant to say leaks on exhaust side

where to clock the exhaust bolts sorry.


only in and out play, no left to right

Your car isn't smoking like a crack whore?
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #6 on: March 25, 2009, 09:50:56 PM »
fuck yeah

like a house is on fire


what is the cause??
new seals and bearings
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Turbo LEAKING oil
« Reply #7 on: March 25, 2009, 09:53:06 PM »
what turbo is this?  what size oil line? restrictor?
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #8 on: March 25, 2009, 09:55:02 PM »
garrett t3 t4 60trim/ .63

-3an feed

1/2" oil drain

drain wasnt too good, so i clocked turbo about 45* and let it drain downhill.


not sure why oil will leak with car off and thru the bolt.
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Turbo LEAKING oil
« Reply #9 on: March 25, 2009, 10:08:38 PM »
your shit got blaasted didnt it
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #10 on: March 25, 2009, 10:10:03 PM »
not sure what you mean but i rebuilt it

new seals and bearings

how would oil be leaking when no oil is feeding inside the turbo?
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #11 on: March 25, 2009, 10:11:35 PM »
dont think i nneed a restrictor

line is -3an and its a journal bearing turbo


car has not been boosted
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #12 on: March 25, 2009, 10:17:21 PM »
what size restrictor ?
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #13 on: March 25, 2009, 10:18:41 PM »
why would it leak oil without any pressure?
with car off
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #14 on: March 25, 2009, 10:26:41 PM »
i am not missing a bolt
bolt is tight

and how likely is it that the seals blew in 5 minutes of driving?
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #15 on: March 25, 2009, 10:34:43 PM »
hmmm
anyone with a good answer? :o
Logged

widebody93

  • Snitch Nigger Deluxe
  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Widebody93
Re: Turbo LEAKING oil
« Reply #16 on: March 25, 2009, 11:12:40 PM »
1/16 th is too big. Run a 1/32
Logged

If am a ever retarded enough to get hitched (2x) I would either drink myself to death at my wedding or die trying.

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: Turbo LEAKING oil
« Reply #17 on: March 25, 2009, 11:21:50 PM »
Quote from: b20beast on March 25, 2009, 10:18:41 PM
why would it leak oil without any pressure?
with car off
dynamic seal
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Turbo LEAKING oil
« Reply #18 on: March 25, 2009, 11:26:16 PM »
picures of drain angle
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #19 on: March 26, 2009, 08:22:39 AM »
Quote from: patsmx5 on March 25, 2009, 11:21:50 PM
Quote from: b20beast on March 25, 2009, 10:18:41 PM
why would it leak oil without any pressure?
with car off
dynamic seal

thanks

but it leaks only on the hot side
Logged

birdley42008

  • Guest
Re: Turbo LEAKING oil
« Reply #20 on: March 26, 2009, 09:31:51 AM »
poorly clocked? If it smokes its the seals. What kind of oil are you using, also you need a restrictor unless you have a MASSIVE turbo to feed. Does your turbo sit very low? Pictures would help.
Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Turbo LEAKING oil
« Reply #21 on: March 26, 2009, 10:32:32 AM »
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Turbo LEAKING oil
« Reply #22 on: March 26, 2009, 10:36:28 AM »
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #23 on: March 26, 2009, 11:02:22 AM »
Quote from: birdley42008 on March 26, 2009, 09:31:51 AM
poorly clocked? If it smokes its the seals. What kind of oil are you using, also you need a restrictor unless you have a MASSIVE turbo to feed. Does your turbo sit very low? Pictures would help.

oil is 10w30 castrol
but im not sure its a restrictor because when the engine is off there is no oil pressure

so why would it drop out the middle part of the turbing housing?
Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #24 on: March 26, 2009, 12:09:57 PM »
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: Turbo LEAKING oil
« Reply #25 on: March 26, 2009, 03:32:17 PM »
Quote from: b20beast on March 25, 2009, 09:49:06 PM
only in and out play, no left to right

Its fuckked, dont run it anymore unless you want it to eat the turbine, and compressor wheels up  Pull it off and have it rebuilt.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: Turbo LEAKING oil
« Reply #26 on: March 26, 2009, 11:39:30 PM »
UR SEALS are BLOWN get it rebuilt  :somb:
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #27 on: March 26, 2009, 11:40:26 PM »
Quote from: boosted 00 black si on March 26, 2009, 11:39:30 PM
UR SEALS are BLOWN get it rebuilt  :somb:



new bearings and seals!!
Logged

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Turbo LEAKING oil
« Reply #28 on: March 27, 2009, 01:42:02 AM »
Quote from: ratcityrex on March 26, 2009, 03:32:17 PM
Quote from: b20beast on March 25, 2009, 09:49:06 PM
only in and out play, no left to right

Its fuckked, dont run it anymore unless you want it to eat the turbine, and compressor wheels up  Pull it off and have it rebuilt.

I agree with this.  Same thing hapened to me my turbo was leaking out of the hot side but had no shaft play, 500 miles later it has all kinds of play.  the oil is leaking out of your turbine when its spinning but only pores out of the center section wen it stops moving.  Get it!

theres no seals on the hot side just the shaft piston ring.
It looks like this



Logged

b20beast

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: Turbo LEAKING oil
« Reply #29 on: March 27, 2009, 07:55:13 AM »
Quote from: snarf on March 27, 2009, 01:42:02 AM
Quote from: ratcityrex on March 26, 2009, 03:32:17 PM
Quote from: b20beast on March 25, 2009, 09:49:06 PM
only in and out play, no left to right

Its fuckked, dont run it anymore unless you want it to eat the turbine, and compressor wheels up  Pull it off and have it rebuilt.

I agree with this.  Same thing hapened to me my turbo was leaking out of the hot side but had no shaft play, 500 miles later it has all kinds of play.  the oil is leaking out of your turbine when its spinning but only pores out of the center section wen it stops moving.  Get it!

theres no seals on the hot side just the shaft piston ring.
It looks like this





thanks bro

i replaced that as well...

what did you do to fix yours?
Logged
Pages: [1] 2   Go Up
« previous next »