Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 118852 times)

flat_black · « **Reply #120 on:** November 01, 2009, 03:54:38 AM »

Quote from: bigdaddyvtec on November 01, 2009, 03:22:35 AM

Quote from: 90turboteg on November 01, 2009, 03:12:07 AM
ya i was fucked on 2 new pte turbos, one time they said i had to much oil pressure and the other time i didnt have enough. i was like how the fuck do i get the right pressure u fucks. i will never buy another turbo from them, there seals are garbage also. holset/garret ftw.

if they dont warranty it just get the guy from office space to light there warehouse on fire, or anthrax in a box lol

good luck man, lmk if you get any cheap crx's on your lot...

Precision uses Garrett center sections with their own housings/backplates.. The seals are the same negro

they dont look the same

bigdaddyvtec · « **Reply #121 on:** November 01, 2009, 03:56:18 AM »

I LOVE BMCs flanges.... So pimp.

You spelled Dropout wrong

LOL

d-rail · « **Reply #122 on:** November 01, 2009, 05:57:18 AM »

They told widebooty he didn't use proper feed line when he decided to feed hit turd-blow some metal material. Wasn't the actual issue and it was obvious if you looked at his turbo but they still covered his ass for being an idiot and driving open turbo in a town that has metal laying EVERYWHERE from the place we work at. Straight up company

90turboteg · « **Reply #123 on:** November 01, 2009, 02:13:53 PM »

Quote from: bigdaddyvtec on November 01, 2009, 03:22:35 AM

Quote from: 90turboteg on November 01, 2009, 03:12:07 AM
ya i was fucked on 2 new pte turbos, one time they said i had to much oil pressure and the other time i didnt have enough. i was like how the fuck do i get the right pressure u fucks. i will never buy another turbo from them, there seals are garbage also. holset/garret ftw.

if they dont warranty it just get the guy from office space to light there warehouse on fire, or anthrax in a box lol

good luck man, lmk if you get any cheap crx's on your lot...

From what I undwerstand (Have been told) precision uses Garrett center sections with their own housings/backplates.. The seals are the same negro

actualy pte started making there own seals years ago, and they also modify the garret center sections. the turbine seal looks different from garrett and may be a different alloy. but im not 100% sure on that. all i know is i have seen about 20 more pte turbos turbine shaft seal fail than any garret. not sure what they change but its not a good. my sc61s turbine seal looked like it got stuck and started waring itself out, yet it was new.

bigdaddyvtec · « **Reply #124 on:** November 01, 2009, 03:02:48 PM »

Quote from: 90turboteg on November 01, 2009, 02:13:53 PM

Quote from: bigdaddyvtec on November 01, 2009, 03:22:35 AM
Quote from: 90turboteg on November 01, 2009, 03:12:07 AM
ya i was fucked on 2 new pte turbos, one time they said i had to much oil pressure and the other time i didnt have enough. i was like how the fuck do i get the right pressure u fucks. i will never buy another turbo from them, there seals are garbage also. holset/garret ftw.

if they dont warranty it just get the guy from office space to light there warehouse on fire, or anthrax in a box lol

good luck man, lmk if you get any cheap crx's on your lot...

From what I undwerstand (Have been told) precision uses Garrett center sections with their own housings/backplates.. The seals are the same negro

actualy pte started making there own seals years ago, and they also modify the garret center sections. the turbine seal looks different from garrett and may be a different alloy. but im not 100% sure on that. all i know is i have seen about 20 more pte turbos turbine shaft seal fail than any garret. not sure what they change but its not a good. my sc61s turbine seal looked like it got stuck and started waring itself out, yet it was new.

you sure about that seal thing??? Id like to hear it from a Garrett or Precision rep...

Not thast youre full of shit... Itds just that youre fat.

Too...

90turboteg · « **Reply #125 on:** November 01, 2009, 03:15:17 PM »

ya thats why im not 100% sure, id also like to know, but ive rebuilt pte turbos with new garret seals and have had no problems... how come u didnt buy me a cheeseburger asshole

boosted 00 black si · « **Reply #126 on:** November 01, 2009, 09:26:46 PM »

Quote from: 90turboteg on November 01, 2009, 03:12:07 AM

ya i was fucked on 2 new pte turbos, one time they said i had to much oil pressure and the other time i didnt have enough. i was like how the fuck do i get the right pressure u fucks. i will never buy another turbo from them, there seals are garbage also. holset/garret ftw.

if they dont warranty it just get the guy from office space to light there warehouse on fire, or anthrax in a box lol

good luck man, lmk if you get any cheap crx's on your lot...

yup fuck them turbos i had a brand new pte do the same shit. ended up getting a new one n sold it on egay

bigdaddyvtec · « **Reply #127 on:** November 01, 2009, 10:49:00 PM »

Not one problem with mine. Untill I RAN it without oil....

DRQPQUT · « **Reply #128 on:** November 01, 2009, 11:18:57 PM »

at this point its pure speculation what they do i know they took care of me last time...so im keeping my fingers crossed

90turboteg · « **Reply #129 on:** November 02, 2009, 01:13:39 AM »

trying to convince eric that i went down with to buy your manifold stuff for his crx... it would be nuts

DRQPQUT · « **Reply #130 on:** November 02, 2009, 07:48:01 PM »

Quote from: 90turboteg on November 02, 2009, 01:13:39 AM

trying to convince eric that i went down with to buy your manifold stuff for his crx... it would be nuts

you should thats a baller setup for 500.00 bucks

bigdaddyvtec · « **Reply #131 on:** November 02, 2009, 07:55:50 PM »

500 is tooooo cheap for all of it w/wg.

90turboteg · « **Reply #132 on:** November 02, 2009, 11:46:16 PM »

Quote from: bigdaddyvtec on November 02, 2009, 07:55:50 PM

500 is tooooo cheap for all of it w/wg.

ya thats why im buying the wastgate for my crx... wheres my dam cheeseburger

88dx · « **Reply #133 on:** November 03, 2009, 12:50:44 AM »

the last thing you guys need is a cheeseburger

90turboteg · « **Reply #134 on:** November 03, 2009, 01:05:57 AM »

the last thing you need to do is walk in on me bangin your mom again

ps i need that fucking collector jackass what you want for it

d112crzy · « **Reply #135 on:** November 03, 2009, 03:29:27 AM »

Quote from: 88dx on November 03, 2009, 12:50:44 AM

the last thing you guys need is a cheeseburger

is that a fat joke? fuck your mother

88dx · « **Reply #136 on:** November 03, 2009, 03:37:44 AM »

Quote from: d112crzy on November 03, 2009, 03:29:27 AM

Quote from: 88dx on November 03, 2009, 12:50:44 AM
the last thing you guys need is a cheeseburger

is that a fat joke? fuck your mother

yes it is

97% of the NW crew is extra lage

d112crzy · « **Reply #137 on:** November 03, 2009, 09:39:11 AM »

I'm just fluffy.

bigdaddyvtec · « **Reply #138 on:** November 03, 2009, 09:45:11 AM »

no youyr just short... which makes you look eveb dumpier

90turboteg · « **Reply #139 on:** November 03, 2009, 06:35:55 PM »

Quote from: 88dx on November 03, 2009, 03:37:44 AM

Quote from: d112crzy on November 03, 2009, 03:29:27 AM
Quote from: 88dx on November 03, 2009, 12:50:44 AM
the last thing you guys need is a cheeseburger

is that a fat joke? fuck your mother
yes it is 97% of the NW crew is extra lage

ya and your jealous. were the big nogs

j.h.christ · « **Reply #140 on:** November 03, 2009, 07:21:06 PM »

i'm just posting in here because it's the xtra large nog thing to do.

dvst8r · « **Reply #141 on:** November 03, 2009, 11:13:20 PM »

So what is the size cut off for the xtra large nog deal? I'm thinned out to 215.

90turboteg · « **Reply #142 on:** November 04, 2009, 12:44:27 AM »

well im 6'6 and 330 or so, give or take a few. i think 215s on the light size unless your like 5'5

dvst8r · « **Reply #143 on:** November 04, 2009, 12:02:37 PM »

LOL, well at 6'3" I guess I'm not quite there. 90dx and Brine04 will both qualify.

crxvtec91 · « **Reply #144 on:** November 04, 2009, 12:19:30 PM »

NW is fluffy

ratcityrex · « **Reply #145 on:** November 04, 2009, 12:21:15 PM »

Quote from: crxvtec91 on November 04, 2009, 12:19:30 PM

NW is HUSKEY

88dx · « **Reply #146 on:** November 04, 2009, 12:40:26 PM »

Quote from: crxvtec91 on November 04, 2009, 12:19:30 PM

NW is fluffy

Not all of us are fluffy, I stay in shape with at least 4-5 hours a day on the couch

bigdaddyvtec · « **Reply #147 on:** November 04, 2009, 03:04:14 PM »

Your not fluffy Steve bu there is something LUrch ish about you

Oh yes I did

j.h.christ · « **Reply #148 on:** November 04, 2009, 09:07:32 PM »

300 pounds or gtfo

DRQPQUT · « **Reply #149 on:** November 04, 2009, 09:33:41 PM »

that sucks cuz im only 274lbs

News:

Author Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 118852 times)

Author Topic: LEED Tuned CB7 UPDATEpg 9 (Read 118852 times)