Topic: RHMT project #6 - 2000 CRV (Read 99487 times)

onlyflash944 · « **Reply #90 on:** January 30, 2010, 06:35:56 PM »

page 4 is mine

keep us updated

SloS13 · « **Reply #91 on:** January 30, 2010, 08:25:04 PM »

Piping is coming on Wednesday. Dead in the water until then except for some small junk.

spriggan · « **Reply #92 on:** January 31, 2010, 03:11:37 PM »

was following this on [m] but its better here!

speedjunky01 · « **Reply #93 on:** January 31, 2010, 03:22:19 PM »

Quote from: spriggan on January 31, 2010, 03:11:37 PM

was following this on [m] but its better here!

where is your porn sir?

glustic · « **Reply #94 on:** February 02, 2010, 05:37:51 PM »

Quote from: speedjunky01 on January 31, 2010, 03:22:19 PM

Quote from: spriggan on January 31, 2010, 03:11:37 PM
was following this on [m] but its better here!

where is your porn sir?

SloS13 · « **Reply #95 on:** February 04, 2010, 01:00:28 PM »

Taking today/tomorrow off of work to hopefully finish. garage is cold

cheap 16g/14b outlet gasket FTW. It was like $1.00

SloS13 · « **Reply #96 on:** February 04, 2010, 09:33:01 PM »

Got the cold pipe and part of the exhaust done. Also had to clock the turbo b/c the adapter plate was fucking with the feed line. Hot pipe was/is/going to be a PITA. Will try again tomorrow.

speedjunky01 · « **Reply #97 on:** February 04, 2010, 10:05:45 PM »

doesnt look to bad, good work once again man

i like the choped up DP

ratcityrex · « **Reply #98 on:** February 04, 2010, 11:43:57 PM »

Looking good. What size exhaust you gona ron on hte beast? 2 1/2"?

SloS13 · « **Reply #99 on:** February 05, 2010, 11:30:52 AM »

Quote from: ratcityrex on February 04, 2010, 11:43:57 PM

Looking good. What size exhaust you gona ron on hte beast? 2 1/2"?

yup

special ed · « **Reply #100 on:** February 05, 2010, 05:45:47 PM »

this is a sick build. just cancelling out the trouble of B20 swapping haha. i saw one in minneapolis lowered with a set of not too large wheels and blacked out tails. it was very clean and immediately made me think that boosting one would be kinda cool.

i skimmed the thread, so i might have missed if there was a drivetrain issue. can it handle more power?

SloS13 · « **Reply #101 on:** February 05, 2010, 07:17:02 PM »

Quote from: special ed on February 05, 2010, 05:45:47 PM

i skimmed the thread, so i might have missed if there was a drivetrain issue. can it handle more power?

From what little I've heard they seem to do okay. I wont be doing any AWD drifting with it or many hard launches. The rear wheels only kick in when the fronts slip

glustic · « **Reply #102 on:** February 06, 2010, 03:47:58 PM »

Quote from: SloS13 on February 05, 2010, 07:17:02 PM

Quote from: special ed on February 05, 2010, 05:45:47 PM

i skimmed the thread, so i might have missed if there was a drivetrain issue. can it handle more power?

From what little I've heard they seem to do okay. I wont be doing any AWD drifting with it or many hard launches. The rear wheels only kick in when the fronts slip

DOOOD! Mad Tyyeee drifft vidzzzz!

Seriously though, where the fuck are the updates?

SloS13 · « **Reply #103 on:** February 06, 2010, 05:20:04 PM »

crv.3gp

ApexSilver06MR · « **Reply #104 on:** February 06, 2010, 05:55:00 PM »

yes. fucking score. i love this build

good shit jess

glustic · « **Reply #105 on:** February 06, 2010, 07:01:05 PM »

Quote from: ApexSilver06MR on February 06, 2010, 05:55:00 PM

yes. fucking score. i love this build

good shit jess

+1 Quality shit righ there

snm95ls · « **Reply #106 on:** February 06, 2010, 07:01:47 PM »

FUCK YOU!

We need more panty rippers, stat!

SloS13 · « **Reply #107 on:** February 06, 2010, 07:51:29 PM »

Quote from: snm95ls on February 06, 2010, 07:01:47 PM

FUCK YOU!

We need more panty rippers, stat!

It'll probably be a few days. Untuned as hell. It'll spin second for a sec before the rear wheels get power. Im 90% sure I got a boost leak too. Only put about 4 miles on it. Only running WG pressure (7psi) for now. boooooo

patsmx5 · « **Reply #108 on:** February 06, 2010, 08:32:49 PM »

Is there any way to set it so that the rear wheels are always on? Have a switch or something?

SloS13 · « **Reply #109 on:** February 06, 2010, 09:17:04 PM »

Quote from: patsmx5 on February 06, 2010, 08:32:49 PM

Is there any way to set it so that the rear wheels are always on? Have a switch or something?

I dunno but I doubt I'd do that. From what I've heard it would burn out stuff or something like that, plus its all mechanical

speedjunky01 · « **Reply #110 on:** February 06, 2010, 09:46:41 PM »

sounds mean as hell get to tuning!

lilpooh21186 · « **Reply #111 on:** February 07, 2010, 03:23:21 AM »

this is RHMT finest Build any awd dynos close to you? all this bitch needs is some Crome fturhmtw= For the Ultimate real home made turbo win

SloS13 · « **Reply #112 on:** February 07, 2010, 07:45:41 PM »

Got the exhaust done. Bumped up the basemap I'm using but still lean as piss. Gotta put an XP laptop together so I can get my tine on. If I wasn't 5 hours from j d I'd let him have the first stab at it.

edit: Bringing it to JD on the 20th. Gonna richen it up and limp around till then.

Ntrain2k · « **Reply #113 on:** February 07, 2010, 11:05:51 PM »

Badass

shogun · « **Reply #114 on:** February 08, 2010, 09:34:25 PM »

holy shit that there is full of win, id love to have a clone

malichite · « **Reply #115 on:** February 08, 2010, 09:50:34 PM »

This build = teh hotness! :yes:

danz · « **Reply #116 on:** February 08, 2010, 10:26:16 PM »

best part was when i watched the vid, thought it was someone else's turbo crv, then i realized how stupid i was.

i liked that part.

SloS13 · « **Reply #117 on:** February 09, 2010, 08:45:43 AM »

Did a shit job of tuning today so I could give it some gas. Popping a coupler off = progress.

Eggylshatch · « **Reply #118 on:** February 09, 2010, 11:32:10 AM »

How much did you get the crv for? I haven't been able to find any reasonably priced 5 speeds around here.

AbaZ · « **Reply #119 on:** February 09, 2010, 12:29:22 PM »

you lay some nagger ass welds.

rhmt quality

News:

Author Topic: RHMT project #6 - 2000 CRV (Read 99487 times)