Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Foowee]

I figured I'd make my own...  and it's gonna bolt in place of a hf w/a t3 adapter plate too...

Materials from acestainless and bmc:



Jigga what?


Jigga who?


Jigga what?






Fab is dirty:



Time for a bath:



All clean:



more later... 

[Hotrodlincoln]

I approve  :yes:

[Atticus]

Who's the chick on the right?

[ryan89crx]

Who's the chick on the right?

Sweet Adri

[Joseph Davis]

Sluts of a feather flock together.

[Teg2boo]

Who's the chick on the right?

Sweet Adri

He don't know the "classics". Amateur fapper there.

[ryan89crx]

Who's the chick on the right?

Sweet Adri

He don't know the "classics". Amateur fapper there.

That and the fact that it says sweetadri.com right on the pic.....and we ALL know the other chick is Melissa Midwest

[Teg2boo]

For sure!  ;D

[caged]

great post

[crttaz]

Making manifolds is not so easy...........Foowee is learning that!

[HiProfile]

"Give a man a manifold and he'll boost a single car. Teach a man how to weld and he'll boost his cars forever." ;D


I have to say, making a manifold is harder than some things. Like getting a homegirl to toss your salad.

[Foowee]

I've got #1 fitted n tacked.  #4 is almost ready to be tacked.  I couldn't get a signal from the church last night, otherwise I'd have more pics up... 

Bone stopped by n got to hear that I now understand why manifolds cost $$$...  cause this cutting n fitting bs ain't fuckin' easy...

[Joseph Davis]

Band saws take seconds compared to the minutes of a chop saw/angle grinder.  There's still a lot of labor involved.

[malichite]

Sluts of a feather fuck together.

I to approve of this post.  In for the pictures nigga!

[turbob16hatch]

Band saws take seconds compared to the minutes of a chop saw/angle grinder.  There's still a lot of labor involved.

I angle grinder with a nice 80 grit flap disk tear's the fitting up. Although the black boogers from grinding on pipes is annoying.

[Joseph Davis]

Good info, how long do the 80 grit flaps last?

[turbob16hatch]

Good info, how long do the 80 grit flaps last?

there 2 kinds i get, one has twice the material on it. so for the thick ones i would say 1 ramhorn maybe half way through another manifold.

there only like $5/e so i will buy up a bunch at a time and never need to buy them for months.

[glustic]

This thread is full of win!!!!!! In for more fab pics.

[statenis33]

mmm...orange chicken!

[dvst8r]

mmm...orange chicken!

Intro thread.

[glustic]

mmm...orange chicken!

Intro thread.

[crttaz]

mmm...orange chicken!

Intro thread.

[Joseph Davis]

mmm...orange chicken!

Intro thread.

[turbob16hatch]

mmm...orange chicken!

Intro thread.

[Foowee]

One... ah ah ah











Damnit...



Time for another bath...

[crttaz]

So you didn't get anything done tonight???

Modded T-stat is in the car.

clipped the brass bleeder thingy, drilled to .220" then 4 small .120" holes at the bottom of the T-stat.

Doubt it will help, but I was bored. Forgot how well the Y8 ED Slushy likes to move out for what it is.

[Foowee]

I put pics on the interwebs for all to see and took another bath...    ;D

[t_cel_t]

So you didn't get anything done tonight???

Modded T-stat is in the car.

clipped the brass bleeder thingy, drilled to .220" then 4 small .120" holes at the bottom of the T-stat.

Doubt it will help, but I was bored. Forgot how well the Y8 ED Slushy likes to move out for what it is.

too many holes, i did that shit once and my car never got above 140

[Joseph Davis]

Just upgrade radiator/coolant lines, run a high pressure radiator cap, and don't worry about it.

[turbob16hatch]

Just upgrade radiator/coolant lines, run a high pressure radiator cap, and don't worry about it.

Theres a reason i refuse to pull my stock full rad out. I ran for a year with no rad. fan. and never had overheating, it would go up 1/4 way at drive throughs.