Topic: Locost update (Read 45114 times)

ktown powder coating · « **on:** March 29, 2010, 09:52:53 AM »

I have not posted anything about the Locost build since my intro wanted to wait till I started doing the turbo install... So here goes.

Here is the Weir log manifold kit with the DMS T25 install and the IC piping tacked in place.

Running a walbro 190 external pump with 1.8L miata injectors, MSD timing control and RRFPR.

weirtech · « **Reply #1 on:** March 29, 2010, 09:56:52 AM »

looks good so far. when do you want that main hoop bent up? i may be getting a 1.75" die set soon, so you'll have a choice from 1.5" 1.625" or 1.75". i've got a valve cover i'd like powdercoated.

ktown powder coating · « **Reply #2 on:** March 29, 2010, 10:02:35 AM »

I am going to do the measurments for the hoop this week and I will give you a call.

Lowerit · « **Reply #3 on:** March 29, 2010, 10:20:48 AM »

Weir

Give the valvecover to dustin , I will drop it off at Ktowns as he is unfortunatley a friend.

Looks good Mike.

malichite · « **Reply #4 on:** March 29, 2010, 12:51:25 PM »

Man, I just stumbled acrost these locosts not to long ago and have been amped up on them sense. I am hoping to get started on one as soon as I clear out some other projects. Yours looks bitchen! What are you using for front spindles? Also, are you doing IFS in the rear or solid axle?

Jorsher · « **Reply #5 on:** March 29, 2010, 12:59:22 PM »

Quote from: malichite on March 29, 2010, 12:51:25 PM

Man, I just stumbled acrost these locosts not to long ago and have been amped up on them sense. I am hoping to get started on one as soon as I clear out some other projects. Yours looks bitchen! What are you using for front spindles? Also, are you doing IFS in the rear or solid axle?

Yah, locosts are pretty badass. I bought a book called Kimini a while back which is basically a write-up of someone else's DIY build.

malichite · « **Reply #6 on:** March 29, 2010, 01:02:31 PM »

Quote from: Jorsher on March 29, 2010, 12:59:22 PM

Quote from: malichite on March 29, 2010, 12:51:25 PM
Man, I just stumbled acrost these locosts not to long ago and have been amped up on them sense. I am hoping to get started on one as soon as I clear out some other projects. Yours looks bitchen! What are you using for front spindles? Also, are you doing IFS in the rear or solid axle?

Yah, locosts are pretty badass. I bought a book called Kimini a while back which is basically a write-up of someone else's DIY build.

Been through that entire build too. That was an excellent car. I am so hooked on these things now I am almost tempted to get rid of the double to make space for this.

Jorsher · « **Reply #7 on:** March 29, 2010, 01:05:42 PM »

Definitely something on my long-term list of shit to do. First I need a garage, some money, some welding experience, etc...so it'll be a while.

ktown powder coating · « **Reply #8 on:** March 29, 2010, 01:16:32 PM »

yeah I am trying to cross it off my list too....

ApexSilver06MR · « **Reply #9 on:** March 29, 2010, 02:46:43 PM »

im liking this one

ktown powder coating · « **Reply #10 on:** March 29, 2010, 05:21:48 PM »

Playing with MAF mounting locations

michigan_soler · « **Reply #11 on:** March 29, 2010, 05:38:35 PM »

I might be blind but I haven't seen your build log on locost usa.

malichite · « **Reply #12 on:** March 29, 2010, 05:42:22 PM »

I am pretty sure I have seen it there. Can't find it now. I recognize the LCAs.

ktown powder coating · « **Reply #13 on:** March 29, 2010, 06:33:25 PM »

I have a build blog somwhere over ther I have not been keeping it up to date

michigan_soler · « **Reply #14 on:** March 29, 2010, 09:05:32 PM »

Im thinking about start one soon. Off and on road d-series though

ktown powder coating · « **Reply #15 on:** March 30, 2010, 08:12:08 AM »

I do not think I have ever seen one built with a d-series motor. I think the only Honda motor I have ever seen used is an S2000.

crxvtec91 · « **Reply #16 on:** March 30, 2010, 09:29:00 AM »

I would love to see more pic's of this thing! Also more spec's!

ktown powder coating · « **Reply #17 on:** March 30, 2010, 09:42:50 AM »

he is another build blog I had going with more pictures

http://ktownracescene.proboards.com/index.cgi?board=cars&action=display&thread=5634&page=1

Lowerit · « **Reply #18 on:** March 30, 2010, 09:59:58 AM »

Quote from: ktown powder coating on March 30, 2010, 09:42:50 AM

he is another build blog I had going with more pictures

http://ktownracescene.proboards.com/index.cgi?board=cars&action=display&thread=5634&page=1

Since you are a fuckin tool who forgot you need to join Ktown knuckle draggers to see anyhting (I don't know why) here are the pics

Sexiest man alive

malichite · « **Reply #19 on:** March 30, 2010, 10:02:01 AM »

Thanks, I wasn't signing up for that fucking site.

ktown powder coating · « **Reply #20 on:** March 30, 2010, 10:07:02 AM »

yeah sorry about the site I didn't know you needed to be a member.... lame.

What other spec's were you wanting to know???

Lowerit · « **Reply #21 on:** March 30, 2010, 11:18:57 AM »

Quote from: malichite on March 30, 2010, 10:02:01 AM

Thanks, I wasn't signing up for that fucking site.

you don't want to either... Imports are slow , every car with a V8 runs 9 sec 1/4 miles and fucking your sister is ok.

malichite · « **Reply #22 on:** March 30, 2010, 12:07:46 PM »

Quote from: malichite on March 29, 2010, 12:51:25 PM

What are you using for front spindles? Also, are you doing IFS in the rear or solid axle?

ktown powder coating · « **Reply #23 on:** March 30, 2010, 01:15:43 PM »

The front spinals are from the Miata and I am running the whole rear subframe out of the miata so it's IRS.

malichite · « **Reply #24 on:** March 30, 2010, 01:33:09 PM »

Doh, that was pretty obvious from your pictures. I suck at life ;D

ktown powder coating · « **Reply #25 on:** March 30, 2010, 01:40:36 PM »

LOL no worries...

malichite · « **Reply #26 on:** March 30, 2010, 01:41:38 PM »

Is it a book chassis or bigger?

ktown powder coating · « **Reply #27 on:** March 30, 2010, 02:00:22 PM »

It's bigger..... it's called a Mcsorley7+442

michigan_soler · « **Reply #28 on:** March 30, 2010, 03:18:22 PM »

The only d series I have seen are that locost ariel atom from a 2000 ex and a sand rail on hater tech. And the rail was done very poorly. Yours is looking very good though. Keep it up

t_cel_t · « **Reply #29 on:** March 30, 2010, 09:55:44 PM »

i need to build one of these, why havent i seen this before

sweet vid
Locost Drifting

News:

Author Topic: Locost update (Read 45114 times)