:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1] 2   Go Down

Author Topic: my junk as set up (nsfw)  (Read 25238 times)

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
my junk as set up (nsfw)
« on: April 06, 2009, 11:30:01 PM »
i just got some junk ass set up going on ..
car is a 97 civic hatch
goals get the shit running sometime but really about 350 hp
motor d16
ems chipped p27 obd1
h beams
 blowen up so looking for new pistons
t4 turbo
window weld mounts turbo rhmt shit right there
said car

car with the said jackass (me)

ar 60 cold ar 81 hot side

my rods and shit

fucked piston after  a boost spike

i put this shit togather outside in the snow and ice







« Last Edit: April 20, 2009, 01:03:23 AM by mycarslow »
Logged

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #1 on: April 06, 2009, 11:35:30 PM »
aslo can i use arp z6 head studs in a d16y block?

junk ebay mani on the small turbo i had that blow it up
« Last Edit: April 06, 2009, 11:57:47 PM by mycarslow »
Logged

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: my junk as set up
« Reply #2 on: April 06, 2009, 11:43:41 PM »
cool car, I like the wheels.  Any pick of the engine bay?
Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: my junk as set up
« Reply #3 on: April 06, 2009, 11:47:11 PM »
Did you learn your skillz at UTI?
Logged
92GSR - mild interest

widebody93

  • Snitch Nigger Deluxe
  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Widebody93
Re: my junk as set up
« Reply #4 on: April 06, 2009, 11:52:21 PM »
Quote from: mycarslow on April 06, 2009, 11:35:30 PM
aslo can i use arp z6 head studs in a d16y block?
You can on all but the two outer intake bolts iirc.

There was a thread on that earlier today that I saw

Nice car. 
Logged

If am a ever retarded enough to get hitched (2x) I would either drink myself to death at my wedding or die trying.

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #5 on: April 06, 2009, 11:54:07 PM »
that was a sin pic im at uti right now
 this is what i found on the arps
i found this out from another site
"The z6 kit comes with 140mm the y7/y8 with 120mm (actually slightly longer since its a stud not a bolt). "
so i THINK theyll work IF this is right
my block and head are both y7 i got the z6 hella cheap tho so im hoping they work
« Last Edit: April 07, 2009, 12:02:32 AM by mycarslow »
Logged

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: my junk as set up
« Reply #6 on: April 07, 2009, 12:29:05 AM »
Quote from: mycarslow on April 06, 2009, 11:35:30 PM
aslo can i use arp z6 head studs in a d16y block?

junk ebay mani on the small turbo i had that blow it up

Thats the manny made to work with a dsm turdbo right?  Did you have a boost spike because of the
built in wastegate or something?
Logged

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #7 on: April 07, 2009, 12:32:18 AM »
yeah .... the spike car from either a hole in the vac line and or the face that it came off the  lol fuck it live and learn
Logged

widebody93

  • Snitch Nigger Deluxe
  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Widebody93
Re: my junk as set up
« Reply #8 on: April 07, 2009, 04:03:17 AM »
Quote from: mycarslow on April 07, 2009, 12:32:18 AM
yeah .... the spike car from either a hole in the vac line and or the face that it came off the  lol fuck it live and learn

LISTEN TO ME








R U ready

























LOOSE THAT FUCKING MANIFOLD NOW NIGGER


















I LEARNED MY LESSONS WITH THAT
























ONLY GOOD FOR 300whp and risking cracking




















LOG/eville140/homedepot made log is better that that, ports are wayyyyy toooo small.


WITNESS THIS

DMC, DRAIL, BONE"crttaz" all was there to see this, every pull it got red, I was re welding cracks
« Last Edit: April 07, 2009, 04:06:25 AM by widebody93 »
Logged

If am a ever retarded enough to get hitched (2x) I would either drink myself to death at my wedding or die trying.

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #9 on: April 07, 2009, 08:24:12 AM »
i alread got rid of that lol my new turbo is t4 anyways lol
Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: my junk as set up
« Reply #10 on: April 07, 2009, 10:17:30 AM »
do work.  blown motors are no big setback

on a side note, i've got a set of 75.5mm vitaras and rings i might let go
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #11 on: April 07, 2009, 02:22:44 PM »
how much ?
Logged

MantisX

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 362
Re: my junk as set up
« Reply #12 on: April 07, 2009, 02:31:59 PM »
Shortage of porn, but otherwise, nice setup.
Logged

TheMadScientist

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1937
  • I'm like Batman and Shit
Re: my junk as set up
« Reply #13 on: April 07, 2009, 04:04:59 PM »
Quote from: MantisX on April 07, 2009, 02:31:59 PM
Shortage of porn, but otherwise, nice setup.
+1

You better get this shit on hit ASAP
You better fix that PORN problem too.
Logged
Why would I not be surprised if your pink slip included "quotquotthen Mr Davis overturned the table while shouting, HOWS THAT FOR FLUID MECHANICS?!"quotquot?

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: my junk as set up
« Reply #14 on: April 07, 2009, 04:16:56 PM »
z series studs with not work on a y series.  unless you want to use a crap load of washers
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up
« Reply #15 on: April 07, 2009, 10:11:50 PM »
i need a turbo main still looks like it will have to be a one off mani being a t4 ......... im looking for pistons yet being that big of a turbo i want to
a higher CR to help spool that thing... but i might not have a prob. becuz the holset hc1 that dude ran is bigger around  1. something hot side??
he made with  a set upof  Eagle/Vitara Y7 279 whp 210 tq 11.200@124.5, 1.68 60 ft. they came with a z6 intake mani and i belive he told me 23 psi
« Last Edit: April 07, 2009, 10:28:19 PM by mycarslow »
Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: my junk as set up (nsfw)
« Reply #16 on: April 08, 2009, 11:51:53 AM »
Your right!  That is junk!


J/P  :P
Logged

papercuts

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: my junk as set up (nsfw)
« Reply #17 on: April 08, 2009, 09:28:22 PM »
your shit is lame wat the fuck. so ur usin a z6 head on hte y7 block? sounds good there. yea higher compression would be ur friend bing u want a big turbo but at the same time u dont sound like u know wat the fuck ur talkin bout so ur probably better off with the vitara build so u dont blow ur shit up real fast. but hey u live u learn rite.
Logged

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up (nsfw)
« Reply #18 on: April 08, 2009, 09:43:00 PM »
Quote from: papercuts on April 08, 2009, 09:28:22 PM
your shit is lame wat the fuck. so ur usin a z6 head on hte y7 block? sounds good there. yea higher compression would be ur friend bing u want a big turbo but at the same time u dont sound like u know wat the fuck ur talkin bout so ur probably better off with the vitara build so u dont blow ur shit up real fast. but hey u live u learn rite.

what mother fucker... i dont what im talking about?  i want higher cr to spool my turbo and im running that turbo to be able to make high hp.with some 780cc injectors... vitaras are in mind becuz i want to do something cheap and still fun this one will not blow im looking into tuners right now
Logged

turbo4life

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1734
Re: my junk as set up
« Reply #19 on: April 09, 2009, 04:18:28 PM »
Quote from: mycarslow on April 07, 2009, 12:32:18 AM
yeah .... the spike car from either a hole in the vac line and or the face that it came off the  lol fuck it live and learn


your tuner should have set you up with boost cut paremiters!  its added with the extra feathers lc,cel shit light ect and is really good to have !  it looks like your shit went really lean..
Logged
End the fake food.

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up (nsfw)
« Reply #20 on: April 09, 2009, 09:42:48 PM »
yeah it did but what do you do lol ... ill suck it up and re do my shit
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: my junk as set up (nsfw)
« Reply #21 on: April 10, 2009, 02:59:20 PM »
I know "Bense" on H-T has a thread about the PROPER way to mix z6/a6 & y7/y8 heads & blocks, concerning head studs. I had a z6 head on a y7 block for a while, the ARP's needed were a "d16y" kit, along with one longer stud for the corner. I actually have the set if you'd want to buy it. Otherwise you just use the y7/y8 bolts and one z6 bolt. It may be two, but do a search for the writeup.


Quote from: mycarslow on April 08, 2009, 09:43:00 PM
what mother fucker... i dont what im talking about?  i want higher cr to spool my turbo and im running that turbo to be able to make high hp.with some 780cc injectors... vitaras are in mind becuz i want to do something cheap and still fun this one will not blow im looking into tuners right now

Spool rpm is NOT related to compression. The turbine accellerates based flow induced by a big pressure drop. To do that you feed MASS into the exhaust. Higher compression does NOT draw any more air into the cylinder, it just absorbs more efficiently (to simplify it). Ask Jeff Evans for his dyno graph on the B18 where they did nothing but swap out a stock 9:1 bottom end for a built 10:1 bottom end, both tuned back to back. The *ONLY* change was power created per PSI during boost. Off-boost power was about 2-3hp greater, which is small enough to blame on atmospheric conditions or even fresh oil.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: my junk as set up (nsfw)
« Reply #22 on: April 11, 2009, 03:19:39 PM »
my first time at the track i didnt even have my internal wastegate boost line hooked up and i didnt ruin any pistsons

internal gates are weak sauce. 

you fucked up.
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: my junk as set up (nsfw)
« Reply #23 on: April 11, 2009, 08:05:17 PM »
Quote from: HiProfile on April 10, 2009, 02:59:20 PM
I know "Bense" on H-T has a thread about the PROPER way to mix z6/a6 & y7/y8 heads & blocks, concerning head studs. I had a z6 head on a y7 block for a while, the ARP's needed were a "d16y" kit, along with one longer stud for the corner. I actually have the set if you'd want to buy it. Otherwise you just use the y7/y8 bolts and one z6 bolt. It may be two, but do a search for the writeup.


Quote from: mycarslow on April 08, 2009, 09:43:00 PM
what mother fucker... i dont what im talking about?  i want higher cr to spool my turbo and im running that turbo to be able to make high hp.with some 780cc injectors... vitaras are in mind becuz i want to do something cheap and still fun this one will not blow im looking into tuners right now
ust
Spool rpm is NOT related to compression. The turbine accellerates based flow induced by a big pressure drop. To do that you feed MASS into the exhaust. Higher compression does NOT draw any more air into the cylinder, it just absorbs more efficiently (to simplify it). Ask Jeff Evans for his dyno graph on the B18 where they did nothing but swap out a stock 9:1 bottom end for a built 10:1 bottom end, both tuned back to back. The *ONLY* change was power created per PSI during boost. Off-boost power was about 2-3hp greater, which is small enough to blame on atmospheric conditions or even fresh oil.
Close.  :P Turbine is an enthalpy converter. Takes energy from the exhaust and turns it into work. h = U + PdV. U is a function of temperature and density, which is a function of the engine's thermal efficiency. if you could run 4000:1 compression and not detonate, you'd have a 97ish % thermally efficient engine. It would make tons of power N/A, but with less than 3% of the energy going out the exhaust, there would be little left to drive a turbine to drive a compressor.

But "common wizzdom" says lower comp hurts spool.  :?:




Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up (nsfw)
« Reply #24 on: April 11, 2009, 08:46:23 PM »
i found some 9:1 wisecos that are 75.5mm
Logged

papercuts

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: my junk as set up (nsfw)
« Reply #25 on: April 15, 2009, 11:53:48 AM »
Quote from: mycarslow on April 11, 2009, 08:46:23 PM
i found some 9:1 wisecos that are 75.5mm


Tell me where they are and if they are cheap I will buy them. U need to get vitaras and a god tuner that won't let u have an adj. Boost controlled cuz u will just blow it up again.

And don't wat mother fucker me u oil pinine bitch. U and ur car are a waste of valueble oxygen. Faggot.
Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: my junk as set up (nsfw)
« Reply #26 on: April 15, 2009, 11:55:59 AM »
Quote from: papercuts on April 15, 2009, 11:53:48 AM
Quote from: mycarslow on April 11, 2009, 08:46:23 PM
i found some 9:1 wisecos that are 75.5mm


Tell me where they are and if they are cheap I will buy them. U need to get vitaras and a god tuner that won't let u have an adj. Boost controlled cuz u will just blow it up again.

And don't wat mother fucker me u oil pinine bitch. U and ur car are a waste of valueble oxygen. Faggot.

Learn how to QUOTE
Logged

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk as set up (nsfw)
« Reply #27 on: April 15, 2009, 12:53:56 PM »
papercut .. shut your nigger loving ass mouth  tell me what to buy mother fucker go hang yourself from  highest  point in the shit hole town you live in  O0
Logged

papercuts

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: my junk as set up (nsfw)
« Reply #28 on: April 15, 2009, 02:44:29 PM »
Fukin whiner with ur shit ass build. Go back to sukin dick on gay porn.
Logged

mycarslow

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
Re: my junk ass set up
« Reply #29 on: April 15, 2009, 09:30:27 PM »
my shit set up? yeah you fucking pos ... i know my shits junk hiints the name dumb fuck now kill your self
Logged
Pages: [1] 2   Go Up
« previous next »