Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 45726 times)

AJxr · « **Reply #30 on:** May 12, 2009, 03:37:01 PM »

everything is awesome, 4" dp looks badass.

bigdaddyvtec · « **Reply #31 on:** May 12, 2009, 03:45:13 PM »

Looks GREAT nig!!! Hope to see you at the meet!!!

hatchbox90 · « **Reply #32 on:** May 12, 2009, 07:50:15 PM »

Thanks guys, manifold is getting here in a couple days and when the motor goes in ill try and take some pics with the wifes camera, or have her take them. Ill try go get some videos of startup and some other fab shit i have to deal with.

crower stage2 cams... hopfully they sound beefy

onlyflash944 · « **Reply #33 on:** May 12, 2009, 08:08:29 PM »

Quote from: hatchbox90 on May 12, 2009, 07:50:15 PM

Thanks guys, manifold is getting here in a couple days and when the motor goes in ill try and take some pics with the wifes camera, or have her take them. Ill try go get some videos of startup and some other fab shit i have to deal with.

crower stage2 cams... hopfully they sound beefy

just put your idle at aboutt 500. if you can keep it running, it sounds wicked at a stop light

hatchbox90 · « **Reply #34 on:** May 16, 2009, 06:07:26 PM »

Ran into a couple problems while starting the motor, ordered the parts today and should be good to go mid week. Start up sounded beefy and loud

hatchbox90 · « **Reply #35 on:** May 20, 2009, 02:04:24 AM »

updated with startup vid on the first post.

Ordered ectune last night and ryan is coming over tomorrow to light tune this thing so its drivable. More vids and pics to come

ryan89crx · « **Reply #36 on:** May 20, 2009, 01:16:43 PM »

seems to idle ok, i bet that fucker is insane rich lol

caged · « **Reply #37 on:** May 21, 2009, 04:00:46 AM »

Nice build

loving that dump pipe.

ryan89crx · « **Reply #38 on:** May 21, 2009, 12:32:21 PM »

so we got the fucker running yesterday. firing order was wrong, corrected it and she fired right up and purrrrrrrred

did a little street tuning as well as some boost just to get it relatively driveable. runs pretty damn good, pulls hard for only 5.5psi :yes:

chris · « **Reply #39 on:** May 21, 2009, 03:40:28 PM »

I was going to say in the video it sounded like something was really off but then again bad sound quality does that too.

ratcityrex · « **Reply #40 on:** May 21, 2009, 03:52:20 PM »

Quote from: ryan89crx on May 21, 2009, 12:32:21 PM

pulls hard for only 5.5psi :yes:

Clasic line, than thing really kicks....lol

ryan89crx · « **Reply #41 on:** May 21, 2009, 04:31:29 PM »

Quote from: ratcityrex on May 21, 2009, 03:52:20 PM

Quote from: ryan89crx on May 21, 2009, 12:32:21 PM
pulls hard for only 5.5psi :yes:

Clasic line, than thing really kicks....lol

lol, i was just watching that video too

hatchbox90 · « **Reply #42 on:** June 08, 2009, 09:27:15 PM »

Driving Sunday afternoon, first gear ripper then my car goes limp and dies. Pull over and try to figure out wtf is wrong, tow it home and figure out i dont have any spark. Take the dizzy off and try to crank it over, notice the car is turning over but the intake cam moving. take the valve cover off to find that these awesome crower cams decided to break in HALF. Not one cam, but both.

ill get shitty cell phone pictures up when my phone wants to cooperate with me and my computer

ratcityrex · « **Reply #43 on:** June 08, 2009, 09:31:59 PM »

Quote from: hatchbox90 on June 08, 2009, 09:27:15 PM

Driving Sunday afternoon, first gear ripper then my car goes limp and dies. Pull over and try to figure out wtf is wrong, tow it home and figure out i dont have any spark. Take the dizzy off and try to crank it over, notice the car is turning over but the intake cam moving. take the valve cover off to find that these awesome crower cams decided to break in HALF. Not one cam, but both.

ill get shitty cell phone pictures up when my phone wants to cooperate with me and my computer

lol shitty luck man. Ive heard of this happening b4 but I dont remember what the cause was.

speedjunky01 · « **Reply #44 on:** June 08, 2009, 09:42:54 PM »

Quote from: hatchbox90 on June 08, 2009, 09:27:15 PM

Driving Sunday afternoon, first gear ripper then my car goes limp and dies. Pull over and try to figure out wtf is wrong, tow it home and figure out i dont have any spark. Take the dizzy off and try to crank it over, notice the car is turning over but the intake cam moving. take the valve cover off to find that these awesome crower cams decided to break in HALF. Not one cam, but both.

ill get shitty cell phone pictures up when my phone wants to cooperate with me and my computer

OEM honda wins again. . .

sorry about your luck best of luck fixing it up quick

ryan89crx · « **Reply #45 on:** June 08, 2009, 10:50:43 PM »

2 broken cams, and at least 4 bent valves. shitty luck

this thing is hotrex status

Teg2boo · « **Reply #46 on:** June 08, 2009, 10:59:30 PM »

I have crower cam too, I hope they wont fail

Nice setup btw! Good luck!

chris · « **Reply #47 on:** June 09, 2009, 01:29:25 PM »

How old are the crower cams? Many of the early ones from atleast 5+ years ago were prone to this

For the dohc vtec b series crowd just buy ctr/itr cams and call it a day.

hatchbox90 · « **Reply #48 on:** June 09, 2009, 07:58:19 PM »

Not sure how old the cams are, but the part number is 63401-t2, Im not sure if those are the older crower cams or not, because ive seen the same crower cams with a part number that starts with a b.

I called crower multiple times and they have yet to return my call.

I wouldnt be too pissed but some of my valves are fucked and the pistons are knicked, plus Cool Desert Nights(local car show) is coming up in a month and now im going to miss it. If crower even knocks off money to replace mine i would be content. Well see. pics to come shortly

ryan89crx · « **Reply #49 on:** June 09, 2009, 08:05:46 PM »

same part #
http://www.honda-tech.com/showthread.php?t=1961769

looks like there are a LOT of people that have had that problem

hatchbox90 · « **Reply #50 on:** June 09, 2009, 09:09:59 PM »

Those cams looks IDENTICAL to mine, broken in the same spots

Maybe ill go with Brian crower instead, havnt seen anything about his cams snapping, plus his customer service seems to be better

Teg2boo · « **Reply #51 on:** June 09, 2009, 09:21:02 PM »

Mine are 62402-t2

Mine are for LS tho

CSaddict · « **Reply #52 on:** June 09, 2009, 09:29:21 PM »

Quote from: hatchbox90 on June 09, 2009, 09:09:59 PM

Those cams looks IDENTICAL to mine, broken in the same spots

Maybe ill go with Brian crower instead, havnt seen anything about his cams snapping, plus his customer service seems to be better

Hotrex got an entire Crower valve train setup with Crower cams and ran it and blew all the exhaust cam caps apart. I wouldn't buy shit from them.

hatchbox90 · « **Reply #53 on:** June 09, 2009, 09:32:42 PM »

Quote from: CSaddict on June 09, 2009, 09:29:21 PM

Quote from: hatchbox90 on June 09, 2009, 09:09:59 PM
Those cams looks IDENTICAL to mine, broken in the same spots

Maybe ill go with Brian crower instead, havnt seen anything about his cams snapping, plus his customer service seems to be better

Hotrex got an entire Crower valve train setup with Crower cams and ran it and blew all the exhaust cam caps apart. I wouldn't buy shit from them.

Crower or Brian Crower?

seems like when brian worked at crower he was the guy to talk to to get your shit back up and running.

chris · « **Reply #54 on:** June 09, 2009, 09:41:48 PM »

Im banking brian crower and crower use the same cores to grind on

dvst8r · « **Reply #55 on:** June 09, 2009, 09:52:22 PM »

Quote from: chris M on June 09, 2009, 09:41:48 PM

Im banking brian crower and crower use the same cores to grind on

Yeah I would bet that as well, as iirc crower cams was started by brian crowers old man, and brian was into sport compacts, so they started the brian crower so he would have something to do. Or so the internet legend goes...

ryan89crx · « **Reply #56 on:** June 10, 2009, 12:02:55 AM »

ITR/CTR cams, cant go wrong with OEM :yes:

hatchbox90 · « **Reply #57 on:** June 10, 2009, 12:39:19 AM »

and now for some cell phone pics,

gangster lean valves

and my cam caps are scarred to shit on the cam gear side, hopfully machine shop can buff em out

this is what it looked like when i was done with the motor setup and was running, cant see the intercooler for shiiiiit

Corey · « **Reply #58 on:** June 10, 2009, 01:03:41 AM »

Quote from: hatchbox90 on June 09, 2009, 09:32:42 PM

Quote from: CSaddict on June 09, 2009, 09:29:21 PM
Quote from: hatchbox90 on June 09, 2009, 09:09:59 PM
Those cams looks IDENTICAL to mine, broken in the same spots

Maybe ill go with Brian crower instead, havnt seen anything about his cams snapping, plus his customer service seems to be better

Hotrex got an entire Crower valve train setup with Crower cams and ran it and blew all the exhaust cam caps apart. I wouldn't buy shit from them.

Crower or Brian Crower?

seems like when brian worked at crower he was the guy to talk to to get your shit back up and running.

he had brian crowers.

lie everyone else said just get itr's. proven to work

vadimka · « **Reply #59 on:** June 10, 2009, 11:47:00 AM »

Good bye nice high comprecion valves.

News:

Author Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 45726 times)

chris

chris

chris

vadimka