:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: tuning dry shoot  (Read 6749 times)

fuse

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
tuning dry shoot
« on: October 31, 2011, 11:10:55 AM »
Ok the set up

lsv
e85
750cc injectors
turbo 8 psi
40 shot dry

Tuned out fine with out the shot. When I activate the shot it just brakes up. Have tried changing timing and fuel with no effect. It ether brakes up bad or back fires. Was told maybe I need different spark plugs with spray? Any other ideas?
Logged

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: tuning dry shoot
« Reply #1 on: October 31, 2011, 11:14:36 AM »
Well Mister Rabuck, that depends on what plugs are in the car, doesn't it?

What are your plugs gapped to?  China/OEM/aftermarket ignition?  What wires?
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: tuning dry shoot
« Reply #2 on: October 31, 2011, 11:31:33 AM »
Logged
OG before the OG'#039#039s

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: tuning dry shoot
« Reply #3 on: October 31, 2011, 12:23:39 PM »
E85 and only 8psi, I would figure 7's would be plenty. Then again, if it has a shitty ignitor or coil, no amount of Plug changing will fix that.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

fuse

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
Re: tuning dry shoot
« Reply #4 on: October 31, 2011, 03:00:19 PM »
Quote from: Joseph Davis on October 31, 2011, 11:14:36 AM
Well Mister Rabuck, that depends on what plugs are in the car, doesn't it?

What are your plugs gapped to?  China/OEM/aftermarket ignition?  What wires?

All stock and ngk stuff. Still on an heat range 6 gaped at .030 they are reading ok dont look to be over heating but should I go with a shorter ground strap? The shot holds for about 2 seconds pulls hard then brakes up no matter what I do.

Could be ignition system but it holds up 8 pounds fine. We start the spray out of boost 3600 rpms, tp 85% or above. We get to about 2 pounds before shit hits the fan.
« Last Edit: October 31, 2011, 03:02:33 PM by fuse »
Logged

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: tuning dry shoot
« Reply #5 on: October 31, 2011, 03:29:54 PM »
Get 7's and gap to .022"-.025"

I bet that fixes it
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: tuning dry shoot
« Reply #6 on: October 31, 2011, 03:43:32 PM »
Quote from: SecksyPeePee on October 31, 2011, 03:29:54 PM
Get 7's and gap to .022"-.025"

I bet that fixes it

I'd do 22 out the gate.
Logged

fuse

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
Re: tuning dry shoot
« Reply #7 on: October 31, 2011, 04:10:21 PM »
K will do.
Logged

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: tuning dry shoot
« Reply #8 on: November 05, 2011, 11:03:54 PM »
I run .020 on 7's on my miata, worked fine with a 100 shot N/A, works fine with with 15-20lbs. Idles smoother with .040 gap though, but won't boost past like 3 psi....
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

fuse

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
Re: tuning dry shoot
« Reply #9 on: November 09, 2011, 02:04:10 AM »
Ya the plugs fixed it know I know....
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: tuning dry shoot
« Reply #10 on: November 09, 2011, 02:11:59 AM »
I was thinking of a dual-gap plug the other day. Maybe that will be the next invention once turbos are on every small econobox. That or rediculous ignition systems.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid
Pages: [1]   Go Up
« previous next »