:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: flange question  (Read 8828 times)

jeremy_nash

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
flange question
« on: November 30, 2011, 11:28:45 PM »
Would this metal be ok to make my flanges from?  I don't wanna end up with the shit powdering on me.


http://www.onlinemetals.com/merchant.cfm?pid=10062&step=4&showunits=inches&id=802&top_cat=849
Logged
Four cylinders are over-rated.  Three is underdog and the only way to go. - Robb

jeremy_nash

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: flange question
« Reply #1 on: November 30, 2011, 11:49:04 PM »
or does anybody have any 3/8" plate?  need 3" x 16"
Logged
Four cylinders are over-rated.  Three is underdog and the only way to go. - Robb

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: flange question
« Reply #2 on: December 01, 2011, 12:04:47 AM »
R u looking for a exhaust manifold flange? What head flange?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jeremy_nash

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: flange question
« Reply #3 on: December 01, 2011, 12:12:40 AM »
I'm just wanting the metal to make my own, as I cant find any for my engine.  suzuki g10 3 cylinder.

plus I'm cheap as fuck!  :Jew:
Logged
Four cylinders are over-rated.  Three is underdog and the only way to go. - Robb

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: flange question
« Reply #4 on: December 01, 2011, 12:27:50 AM »
Quote from: jeremy_nash on December 01, 2011, 12:12:40 AM
I'm just wanting the metal to make my own, as I cant find any for my engine.  suzuki g10 3 cylinder.

plus I'm cheap as fuck!  :Jew:

Hit up weir and see what he's got, or can make
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jeremy_nash

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: flange question
« Reply #5 on: December 01, 2011, 12:31:15 AM »
I just wanna do it myself, will that metal I posted be worth a shit?
Logged
Four cylinders are over-rated.  Three is underdog and the only way to go. - Robb

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: flange question
« Reply #6 on: December 01, 2011, 12:38:45 AM »
Fuck if I know
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6841
  • I look around and all I see is Smegheads
Re: flange question
« Reply #7 on: December 01, 2011, 12:55:42 AM »
If it is 1/2 steel, then yeah it will work.  :noel:
Logged

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: flange question
« Reply #8 on: December 01, 2011, 01:15:52 AM »
no one on teamswift makes flanges? wasnt there that company out of canada or some shit? i thought turbo geos were cool at one time till i realized the 3cyl whp record is like 200
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

mandrel-bends

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 334
    • Columbia River Mandrel Bending
Re: flange question
« Reply #9 on: December 01, 2011, 01:21:32 AM »
Just go by your local steel yard and ask to go through their plate and flat bar drops. Piece big enough to make a header flange will cost you maybe 10 bucks in 1/2 inch steel plate.
« Last Edit: December 01, 2011, 01:32:29 AM by mandrel-bends »
Logged
Columbia River Mandrel Bending
CNC Mandrel Bending &ampamp Precision Waterjet Cutting
http://www.mandrelbends.com

jeremy_nash

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: flange question
« Reply #10 on: December 01, 2011, 04:55:56 PM »
Quote from: mandrel-bends on December 01, 2011, 01:21:32 AM
Just go by your local steel yard and ask to go through their plate and flat bar drops. Piece big enough to make a header flange will cost you maybe 10 bucks in 1/2 inch steel plate.

Sound advice! 
all my local yards were a bunch of douchebags! finally ended up with some though
Logged
Four cylinders are over-rated.  Three is underdog and the only way to go. - Robb
Pages: [1]   Go Up
« previous next »