Topic: Velocity stacks (Read 7261 times)

Ntrain2k · « **on:** December 21, 2011, 07:46:21 PM »

Does anyone know a RHMT priced source?

92CXyD · « **Reply #1 on:** December 21, 2011, 08:32:39 PM »

No, but I remember Chris M. talk about using cupcack pans to make them.

HiProfile · « **Reply #2 on:** December 21, 2011, 08:57:30 PM »

I remember watching some vid where the guy made metal bowls using woodworking tools on a wood lathe. Seemed like the hardest part would be consistency.

1991civicsi · « **Reply #3 on:** December 21, 2011, 10:05:25 PM »

metal bowls, cupcake pans, I love this place!

shogun · « **Reply #4 on:** December 21, 2011, 10:05:38 PM »

look for 4" subwoofer ports, ive used them a couple of times for turbo inlets and they are cheap

like these ones
http://www.ebay.com/itm/Subwoofer-Box-Areo-Tuning-4-Venting-Port-Obcon-/320814154121?pt=LH_DefaultDomain_0&hash=item4ab2038189

Ntrain2k · « **Reply #5 on:** December 21, 2011, 10:12:43 PM »

Needing some for the inside of an intake manifold.

92CXyD · « **Reply #6 on:** December 21, 2011, 10:27:17 PM »

I remember a while back somebody posted a site where you can get intake parts.

I'll look at my bookmarks and see if I can find it.

turbob16hatch · « **Reply #7 on:** December 21, 2011, 11:03:29 PM »

this might work for you.

http://www.rossmachineracing.com/velocitystacks.html

Also metal spinning a set of velocity stacks would be incredibly hard and costly. Not for the average joe.

HiProfile · « **Reply #8 on:** December 21, 2011, 11:55:28 PM »

It was probably me who posted it.

Yup.
http://www.velocity-of-sound.com/commerce/search/index.php3?merchant_id=2107&keywords=&search_type=ANY&custom_store_category=8&by_category=+++GO%21++

jabberwock · « **Reply #9 on:** December 22, 2011, 12:53:45 AM »

Australia!

catsman50 · « **Reply #10 on:** December 22, 2011, 12:57:09 AM »

I made one out of a cardboard tube and foam....... pretty easy it wasnt perfect but it worked and i use it sometimes

slappynuts · « **Reply #11 on:** December 22, 2011, 01:49:46 AM »

Quote from: Ntrain2k on December 21, 2011, 10:12:43 PM

Needing some for the inside of an intake manifold.

What DIA and height? How many? I would have to make up a fixture for the lathe to do this but it looks pretty doable.16ga anneal and spin.

Ntrain2k · « **Reply #12 on:** December 22, 2011, 07:51:41 AM »

Will post up in a bit. Waiting on the 2nd intake to arrive. Have to cut the plenum open and measure.

slappynuts · « **Reply #13 on:** December 22, 2011, 09:05:43 AM »

I have a partially done fixture that I am going to give a spin this morning. I will let you know what happens. If it works out well I will hook you up.

chris · « **Reply #14 on:** December 22, 2011, 10:29:09 AM »

Quote from: 1991civicsi on December 21, 2011, 10:05:25 PM

metal bowls, cupcake pans, I love this place!

The last couple sets of cycle itb's I used the cupcake pans for stacks. They do the job. Some epoxy and some generic filters from the cycle shop down the street and your golden. Stacks for under 5 bucks. Now the best part is going into your local kitchen supply store/wal-mart etc with a pair of calipers measuring cupcake pans. Last time an old women asked what I was baking,lol

HiProfile · « **Reply #15 on:** December 22, 2011, 11:53:17 AM »

Quote from: jabberwock on December 22, 2011, 12:53:45 AM

Australia!

Lol I never noticed that. Most non-USA sites tell you their location on their main page.

Quote from: chris M on December 22, 2011, 10:29:09 AM

Last time an old women asked what I was baking,lol

What would sound better, "DINOSAURS" or "HORSEPOWER"?

DSharp · « **Reply #16 on:** December 22, 2011, 01:44:46 PM »

This is one thing I have been considering making once I finish building my CNC.

slappynuts · « **Reply #17 on:** December 22, 2011, 07:23:09 PM »

I didnt get a chance to fuck around with this project this morning so Im doing it right now. I will post pics up in a while.

Joseph Davis · « **Reply #18 on:** December 23, 2011, 06:25:18 AM »

Sweeeeeeeeeeeeeeeeeeeeeet

slappynuts · « **Reply #19 on:** December 23, 2011, 08:18:16 AM »

I did fuck around with the shit I had at the shop. I think I need to look for a different alloy though. I was having a hard time shaping it.

Joseph Davis · « **Reply #20 on:** December 23, 2011, 03:41:54 PM »

Really prone to split? That was what Crazy Dave's dad ran into when he did the Big Power ZC ITBs.

slappynuts · « **Reply #21 on:** December 23, 2011, 11:22:07 PM »

It seems to go well for a while but then it work hardens.

Passenger · « **Reply #22 on:** December 24, 2011, 12:16:02 AM »

I assume you were just using 6061? Most comercially available 6061 comes in a T6 temper, which mean it won't form worth shit for tight rads. Two things you can do, heat up the material over 400F and let it cool slowly to lose the temper. Or use 5052, which is meant for forming. Some suppliers might even have 3xxx series sheet in stock but I hate working with it, its just too soft.

rawr · « **Reply #23 on:** December 24, 2011, 04:14:36 AM »

Makes moresense to form tube...

slappynuts · « **Reply #24 on:** December 24, 2011, 03:17:48 PM »

Quote from: Passenger on December 24, 2011, 12:16:02 AM

I assume you were just using 6061? Most comercially available 6061 comes in a T6 temper, which mean it won't form worth shit for tight rads. Two things you can do, heat up the material over 400F and let it cool slowly to lose the temper. Or use 5052, which is meant for forming. Some suppliers might even have 3xxx series sheet in stock but I hate working with it, its just too soft.

It was probably 6061 (just some shit from around the shop). I did the sharpie and propane torch anneal.

turbob16hatch · « **Reply #25 on:** December 24, 2011, 05:15:46 PM »

Quote from: Joseph Davis on December 23, 2011, 03:41:54 PM

Really prone to split? That was what Crazy Dave's dad ran into when he did the Big Power ZC ITBs.

Quote from: Passenger on December 24, 2011, 12:16:02 AM

I assume you were just using 6061? Most comercially available 6061 comes in a T6 temper, which mean it won't form worth shit for tight rads. Two things you can do, heat up the material over 400F and let it cool slowly to lose the temper. Or use 5052, which is meant for forming. Some suppliers might even have 3xxx series sheet in stock but I hate working with it, its just too soft.

It's all in material selection. That and having the tooling to be able to form the part.

rawr · « **Reply #26 on:** December 25, 2011, 12:21:52 PM »

if you're going to machine something machine a die out of steel to press them on a hydraulic press out of aluminum tube

You're wasting so much material forming those bitches out of solid stock.

Passenger · « **Reply #27 on:** December 25, 2011, 01:45:31 PM »

I was under the impression that we was trying spin them? You won't be able to get much of a radius with a die to form the tube, even if he did do a proper annealing to T0 with 6061 material. Machining them out of solid bar is hardly a waste, Aluminum is about 99% recycleable.

rawr · « **Reply #28 on:** December 25, 2011, 02:06:28 PM »

of money

rawr · « **Reply #29 on:** December 25, 2011, 02:06:43 PM »

and energy

News:

Author Topic: Velocity stacks (Read 7261 times)

chris