Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

OK

CRX

LOG

HHH

HTDHT

WBHRBL (Wifebody has roast beef lips)

Sewell will have BDVTs lovechild at long last

Fuck a K series

Mr west will slurp manpole juice by the cubic fuckload

Daspoop will finally be reunited with his aluminum jack unless I sell it for Cheeseburgers

HAtchwife will take the highest WHPZ owner on for a buttbang fueled by meth and astroglide

Aaron Cake > JD

AIDS

JD is all that is Bald and Nog

FUCK YOU

Levis car makes 702 WHP, then shits poutine oil all over the dyno

FAKLAD

Stealthmodes next joint is a R&B flop

fuck you for 10 votes

Rawr loves the dick

Buk is still gay

[jdmhatchracer94]

Sewell, what day r u flying in?

Thursday morning to Vancouver, I leave Seattle Sun night. As to when we'll get to seattle, idk for sure, but hopefully before sunday..................

when would there be time to tune? I need some done.

[bigdaddyvtec]

This fucking cocksucker will run By friday night...  Not sure about with the straightcuts in it, but at the very least with a blacker than black fucked up H22 trans mitch has hes giving me. Broken 3rd gearset (Have 4 extras)  fucked up 5 (have that too... A couple bearings it need   (have those) Super dark ground down counter sahaft Jb welded case (I was actually the one that broke it, and the case belonged to him before me LOL, he just need a casto put guts in to drive his car buit he fucked it up)


So Im picking the pile of fucking shit up from him tomorrow and will toss all the sub par fucked up shit I can in it that will make it work and not grind.




IF I GET THE SYNCROS AND STUFF FROM SYNCROTECH in time, The email I get back from Saenz says what I think its going to say and Im right about something else and I get the OK to run this thing again without waiting for parts.... The straights will be in it.

Well see, but it will be there, I have friday off so i have toime to do the 1 thing absolutely correct I just cant by myself. Theres a shop that has the HONDA tool I need to check EXACT preload on the input shaft

[ratcityrex]

Fuck you!!


Is hatchman gonna even show? And bring his crx or even better yet his wife? What about Mr. 88dx who says he's going to be there every year and fails to show up every year. Sounds kinda like Levi......you fuckers better show up.

[bigdaddyvtec]

OK I have


Russ + his lady friend of the road.

Levi, his ho,
 Sweetness Sewell
 Dave....


Thats 6. I have another spot for Das Turd if hes coming.

Casa de chesseburgler is full.

[88dx]

Fuck you!!


Is hatchman gonna even show? And bring his crx or even better yet his wife? What about Mr. 88dx who says he's going to be there every year and fails to show up every year. Sounds kinda like Levi......you fuckers better show up.

I might make it but the GF has the day off so ill probably stay home and violate her all day 

If I do make it what kind of beer do you faggots want me to bring?

[bigdaddyvtec]

Well, I tweaked dthe fuck out on the straightcut box setup and Got errythang figured out to put it back together by the weekend.

dropped off a gear to a machinist buddy of mine to have him polish a thrust surface as I t looked like it got hot and I didnt want it to fuck itself up so I also put NEW collars in it.

I cant lose this set so I wanted to make sure EVERYTHING IS PERFECT.... I have pretty muc got all of it ready to go together, jsut need to go pickup the gear from him after work tomorrow and setup IS lash.




JUST in case Got a tranny from mitch all in parts thrown in a box  with a bench ground countershaft that wouldnt fit initially so he ground it down , a blown up 3rd gearset I replaced and a LOT of other darkness involved. Its very black, but If i cant get the strights done (Prety sure i can, I have Friday off and I know a guy with a shop with EVERYTHING I could POSSIBLY need to get this fucker diealed correctly a block from my house. Tranny shop . IF i need any shims or whatever, theyll have them.

Bottom line is that Im putting all oem syncros in it but 5th, Running RP for the day to break the set in and submerging he entire stacks in lubvricant before ssembly to make SURE everything is SUPER SLICK.


Im pretty sure the Straightcuts will be in it,

[sewell94]

Im half way there.  Chilling in Chicago.

  Anyone want to make odds that we actually get barney on the rollers sat?

[ratcityrex]

Im half way there.  Chilling in Chicago.

  Anyone want to make odds that we actually get barney on the rollers sat?

You guys hitting the dyno to finish the tune today?

[sewell94]

You guys hitting the dyno to finish the tune today?

I don't have a clue.

I hope, but I almost think tmw will be better.

[bigdaddyvtec]

Im half way there.  Chilling in Chicago.

  Anyone want to make odds that we actually get barney on the rollers sat?

DO you seriouly want to Jinx yourself, again?  LOL...

I changed my bed sheets just for you  :O)..


Good news is my gears turned out perfect. Straights will be back in the slut for rapage  :LO)(

[ratcityrex]

Im half way there.  Chilling in Chicago.

  Anyone want to make odds that we actually get barney on the rollers sat?

DO you seriouly want to Jinx yourself, again?  LOL...

I changed my bed sheets just for you  :O)..


Good news is my gears turned out perfect. Straights will be back in the slut for rapage  :LO)(

Well u gonna put it on the rollers?

[bigdaddyvtec]

Prob not, again.. IVe been on that dyno enough, know what the car makes

 theres no point anyways... There are going to be a SHIT TON of people there too, so Im not worried about it. Baby steps. I want to just MAKE it there this year after not having the car there last year... Its going to be close. I do have a blackified backupo tranny but Im aiming to have the dog box in it...

There will be pump gas street rape doe  :O)  My Tires are totally fucking done. Theyll barely last this weekend If im nice as it is and I want to go out sat night

[92CXyD]

Can not wait get another ride in it. 

[flat_black]

how many cars plan on coming?

[j.h.christ]

i'll bring my canon and alienbees setup so levi can feel like he's at home.

[ratcityrex]

I'll be there between 930-945 catching the 840 ferry boat from Kingston.

[leed]

I'll be there before noon, maybe hahaha

[ratcityrex]

Your blackness, Im gonna need your expertise on Sat! I'll buy you a month subscription to bangbuss

[bigdaddyvtec]

I'll be there before noon, maybe hahaha

moshi moshi nigger call me

[ratcityrex]

I'll be there before noon, maybe hahaha

nigger call me

[bigdaddyvtec]

Russ made it here with his friend. Theyre sleeping. Im going to do the same. Tomorrow  operation trick slut running is the plan.

[sewell94]

So levis car did its thing and died already.  Got it fixed, im actually happy the ignitor took a shit, because we found the rotor screw at the bottom of the dizzy lodged in the pickup.

[WhiteShadow]

not brining my poop...   

[Urban Indian]

Fried 2 igniters. Now making second pull on the dyno.

First pull 436hp 254tq


Done at 506whp 309tq 20lbs  on chevron 94 pump mustang dyno

[ratcityrex]

Fried 2 igniters. Now making second pull on the dyno.

First pull 436hp 254tq

Done at 506whp 309tq 20lbs  on chevron 94 pump mustang dyno

So r u going to turn the boost up and put some c16 in?

[bigdaddyvtec]

Woke up,
went to Ross' work.
Shimmed trans.
Put trans together
put trans in car
Changed oil filter.

We made shims to get mainshaft play perfect perfect.



Raped car.


Oil pressure back to normal.
Tranny good.

Dirty 4ths on the freeway make daddy smile, Made Russ' friend Jessica smile too..


The sluts alive, but with carcasses of tires LOL


So sounds like a normal day,
Russ car apart in my driveway
Me running around frantiically stuffing a tranny in my car to make it.

Josh is all that is black.... 

See you assholes tomorrow. Ill be there about 9:45.

[ratcityrex]

Good to hear big man. Car is all washed and ready to go. Upper the boost a touch more. Thing moves good at 17psi. Can't wait to crank it up some more!

[88dx]

Good to hear big man. Car is all washed and ready to go. Upper the boost a touch more. Thing moves good at 17psi. Can't wait to crank it up some more!

And let me tune it 

[jdmhatchracer94]

went to spikers saved russ's ass
watched dustin play with the welder
 and drove the hour and a half back home..
damn russ your lucky I like you lol

need to figure out idle problem and some part throttle tuning on the way up tomorrow and should be good t go I hope. still would like it tuned but fuck it enhanced basemap for life.

[ratcityrex]

Russ, you owe me! I told u I would get you hooked up!