Topic: 92_eg_c1's build thread UPDATED 2013 (Read 24245 times)

Speed Phreak · « **Reply #60 on:** April 26, 2013, 09:55:44 PM »

Quote from: Minor Threat on April 26, 2013, 09:14:25 PM

Four hole toilets. Flat head and a hammer.

I stand corrected, but then I can't use a laptop and look like a mad tunarboi... I suppose beating a carb with a laptop would be hilarious though, and ironic.

92_eg_c1 · « **Reply #61 on:** May 02, 2013, 08:42:46 PM »

shits gettin close, ordering some pipes for my dp and wastegate dump when i get paid monday. fabrication should be done a week or so after that. ill post pics when there done.

ratcityrex · « **Reply #62 on:** May 02, 2013, 09:16:15 PM »

Sweet, in for updates.

92_eg_c1 · « **Reply #63 on:** May 09, 2013, 09:05:16 PM »

Finally got the chance to order most of my exhaust parts. still need to order flex pipe, some t bolt clamps and filter for the turbo.

still need to figure out the oil drain issue and how iam going to get it setup. might make a pit stop to jim greens tomorrow.

maybe order my water lines and fittings for the wastegate but we'll see about that...

92_eg_c1 · « **Reply #64 on:** May 09, 2013, 09:40:17 PM »

fuck it ended up ordering everything else i needed except for the meth kit. shits kinda pricey maybe next paycheck. only small updates for now. shits kinda going slow.

turbohf · « **Reply #65 on:** May 09, 2013, 10:19:43 PM »

get this shit done!

ratcityrex · « **Reply #66 on:** May 10, 2013, 11:26:11 AM »

What are you using that requires a 1.5" clamp?

92_eg_c1 · « **Reply #67 on:** May 16, 2013, 11:07:53 PM »

Quote from: ratcityrex on May 10, 2013, 11:26:11 AM

What are you using that requires a 1.5" clamp?

My wiener. lol JK My upper radiator hose. lol

got all my shit for my DP. just gotta hit up my dude peter to get it welded up. he says he wont do it unless i bring him the car. lol So now, i gotta go to bellingham to register my car, get a basemap, valve adjustment, check timing then drive my pos to him. im starting to think i wont make it to the meet with this bitch.

92_eg_c1 · « **Reply #68 on:** May 18, 2013, 06:39:40 AM »

just ordered my whole oil return line setup that i piece together from treadstone performance. small update, nothing big.

92_eg_c1 · « **Reply #69 on:** May 20, 2013, 04:30:34 AM »

how she sits right now waiting patiently for parts... lol

i am fucking bored niggers.

crxvtec91 · « **Reply #70 on:** May 20, 2013, 09:28:22 AM »

DO WORK!

ratcityrex · « **Reply #71 on:** May 20, 2013, 11:47:21 AM »

Oh, that's cute...... You have a pink lighter to match...... HOW GAY! Now get back to work on this thing! I want to see rippers......

bigdaddyvtec · « **Reply #72 on:** May 20, 2013, 12:32:19 PM »

Bout damn time gangster

92_eg_c1 · « **Reply #73 on:** May 21, 2013, 04:52:39 PM »

Im pissed estimated arrival time for my oil return kit say may 30th.. i hope to fucking honda gods it comes earlier than that cus i still need to get my DP fabbed up, valves adjusted and some street tuning needs to be done. i have one full day to get it running and tuned. i highly doubt it will be done...

bigdaddyvtec · « **Reply #74 on:** May 22, 2013, 01:56:54 PM »

You must have ordered it from SLOWmode.

92_eg_c1 · « **Reply #75 on:** May 22, 2013, 05:47:27 PM »

i should have done the damn 2 day shipping like i originally was going to use. its wierd though, i paid treadstone performance last thursday and it didnt get shipped out til end of tuesday. wtf man. im never ordering from them agian. this is bullshit fuck lol

92_eg_c1 · « **Reply #76 on:** May 25, 2013, 06:27:53 AM »

so i was drunk earlier had an amazing idea...

probably WONT work but damn that was a great idea.

turbohf · « **Reply #77 on:** May 25, 2013, 03:52:13 PM »

cool and all, but an oil drain should be as big as possible... like 5/8-3/4... that looks kinda small, dont want oil to be backing up in that baller turbo..

92_eg_c1 · « **Reply #78 on:** May 26, 2013, 12:15:57 AM »

Quote from: turbohf on May 25, 2013, 03:52:13 PM

cool and all, but an oil drain should be as big as possible... like 5/8-3/4... that looks kinda small, dont want oil to be backing up in that baller turbo..

k fine..

heres Version 2.0

steel pipe jb welded to the shit i cut out.

perfect placement.

Much better now? lol fuck the kit i order im gonna flip that shit on craiglist.

turbohf · « **Reply #79 on:** May 26, 2013, 12:58:38 AM »

looks sexy

92_eg_c1 · « **Reply #80 on:** May 27, 2013, 12:36:57 AM »

i got 5 days to get my ITR cams put in, valves adjusted, timing checked, downpipe & dumptube made & get some sort of tune going. fml. where is dave lee when a newb needs him.

92_eg_c1 · « **Reply #81 on:** May 30, 2013, 10:16:12 PM »

shit runs.. but runs like shit. Had to throw in stock integra injectors and a stock map sensor with a gsr basemap.

hopefully getting my dp and dump tomorrow, fabricator said to bring it over at 3pm so well see. still need to do a valve adjustment but wont do that til uh when i get tuned.

picking up some gsr cams tonight. wait til you guys see my homemade downpipe i made just to drive to my fabricators house. shits gangster.

turbohf · « **Reply #82 on:** May 30, 2013, 11:26:37 PM »

put your cams in, adjust your valves when its cold. put your wideband in. and bring all your shit (ecu, injectors, map) so we can slap it in real quick and fuck with it.

turbohf · « **Reply #83 on:** May 30, 2013, 11:47:31 PM »

http://xenocron.com/bins/index.php?&direction=0&order=&directory=Crome/B-Series

4th one down. change it to a 4bar. and try that.

92_eg_c1 · « **Reply #84 on:** May 31, 2013, 01:39:16 AM »

Quote from: turbohf on May 30, 2013, 11:47:31 PM

http://xenocron.com/bins/index.php?&direction=0&order=&directory=Crome/B-Series

4th one down. change it to a 4bar. and try that.

gonna try this tomorrow when i have access to the burner and laptop.

gsr cams

homemade downpipe to get to my fabricators house. lol

i will most likely try that map though. thanks guys.

92_eg_c1 · « **Reply #85 on:** June 01, 2013, 03:27:44 AM »

got my dump and downpipe done, crusing afr's were 10.1 thats kinda bad right? lol

turbohf · « **Reply #86 on:** June 01, 2013, 10:56:21 AM »

Quote from: 92_eg_c1 on June 01, 2013, 03:27:44 AM

got my dump and downpipe done, crusing afr's were 10.1 thats kinda bad right? lol

runs and drives? not that bad then

we will get you fixed up.

92_eg_c1 · « **Reply #87 on:** June 06, 2013, 06:11:31 AM »

Got smaller injectors like mr dave lee suggested. now just need a stock FPR, bleed the shit out of my radiator and fix all my millions and millions of oil leaks.. great..

News:

Author Topic: 92_eg_c1's build thread UPDATED 2013 (Read 24245 times)