:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: 1 ... 29 30 [31]   Go Down

Author Topic: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~  (Read 202896 times)

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #900 on: September 11, 2018, 07:33:29 PM »

Well, the 8.8 has been cut and welded. I cut 2.875 out of the drivers side axle tube. Clamped it together with 2 pieces of 3" C channel and tacked it together. Rotated the rear 90° and tacked the other sides. Once it was all tacked up, I pulled the clamps and the c channel and burned her down alternating sides. Ground everything with my sanding flapper disk on my angle grinder. Saw where I missed and all my little pin holes and went back over and burned a bunch more. Ground down again.....lol so tiered of grinding. Now I was looking for sway bar perches (since it's also offset to one side about 3") and I can't find shit. So I'm just gonna make some out of my 3" c channel and burn them in. Anyways this is how far I got b4 I called it a day. Need to pull the stock rear now and slide this into place and see what the angle is looking like and once I like it burn the leaf perches in.










Last pic is of both sides all cleaned up. Once I get the old rear out of my nova, I need to clean out the 8.8. It's so full of metal shavings. Just gonna plug the holes and fill it up with purple power and hot water and let it soak.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #901 on: September 20, 2018, 02:05:36 PM »

Okay, so here's some parts

67-69 camaro front lip/spoiler


Wheel bearings and seals
(No picture)

Picked up a ring and pinion 3.08 ratio for $70 shipped Dude was asking $100 and we bartered back and forth on the price and settled for $70


Wheel drill guid/jig so I can convert ford axles to gm pattern and gm pattern to ford.


Picked up a chunk of 2" C channel for the swaybar mounts for the rear axle


Today I'm going to go home and pull the factory rear out of the nova. I have a dude that wants to buy it for $450 who is local I'll believe it when he shows with the cash. Until then I have a larger ass paper weight.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #902 on: September 23, 2018, 11:43:49 AM »

3.08 ring and pinion showed up,  was fucked due to shipper not properly packaging it. Sent it back for a refund. Found a guy local who has the same thing and for $30 less. Gonna swoop that up on Tuesday.




Sold my factory 8.2" nova rear to a guy yesterday. Got $450 for it. Feeling pretty good about that...haha

Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

rawr

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1603
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #903 on: September 30, 2018, 03:08:29 PM »

Where are those wheelies
Logged

JRoyPDX

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 44
  • May or May Not Have Been FooK
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #904 on: December 17, 2018, 05:24:56 PM »

Sub'd.  Where's the updates!?!
Logged
1991 GMC Syclone 11.37 @ 114mph
2017 Silverado RCSB daily, runs 14.4's, trans tune with HPT, too scared to touch the engine tune

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #905 on: December 18, 2018, 01:32:49 AM »

It will be ready to hit the streets come summer of 2028.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #906 on: September 25, 2021, 05:43:33 PM »

It will be ready to hit the streets come summer of 2028.

Still on par for summer of 2028. Car has been sitting in the same spot since my last update on this post. Its only been 3 years since I've touched it.  😖

Life has happened. Had another kid. Still married, working now more than ever. My familys business is booming. Coffee business is crazy right now. Lots of remodeling and adding things to make this company even more successful.

Making a goal starting October to work on the car at least 2 hours a week. Dont sound like much but 10pm at night is pretty much when my day ends. It starts about 445am.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #907 on: September 27, 2021, 12:15:49 PM »

At least you have coffee to get though those long days 😂🤣😂🤣
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #908 on: September 27, 2021, 01:00:38 PM »

At least you have coffee to get though those long days 😂🤣😂🤣

Ain't that the truth! Mainline coffee grounds over here...lol
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

n/a mike

  • Mr. Hotpocket
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1781
  • RHMT
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #909 on: September 27, 2021, 02:18:01 PM »

I just realized this thread started in 2012.
Damn dude, that's one reason I don't want an old car. The projects seem to take too long for my attention span.
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #910 on: September 27, 2021, 03:30:46 PM »

I just realized this thread started in 2012.
Damn dude, that's one reason I don't want an old car. The projects seem to take too long for my attention span.

Dude, its just life. Has nothing to do with a old car. Would take me just as long if it was a civic.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

n/a mike

  • Mr. Hotpocket
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1781
  • RHMT
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #911 on: September 27, 2021, 07:29:01 PM »

I just realized this thread started in 2012.
Damn dude, that's one reason I don't want an old car. The projects seem to take too long for my attention span.

Dude, its just life. Has nothing to do with a old car. Would take me just as long if it was a civic.
I don't know man, for me the Honda projects I've had never took too long, but every old vehicle I've had I sold before it was even close to drivable.

I think for me it's because the Honda stuff was so much cheaper. And unless you have a total shit box the Hondas usually required less work and parts.
Maybe it's because I was a broke ass trying to build a 65 nova
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #912 on: September 27, 2021, 09:22:08 PM »

I just realized this thread started in 2012.
Damn dude, that's one reason I don't want an old car. The projects seem to take too long for my attention span.

Dude, its just life. Has nothing to do with a old car. Would take me just as long if it was a civic.
I don't know man, for me the Honda projects I've had never took too long, but every old vehicle I've had I sold before it was even close to drivable.

I think for me it's because the Honda stuff was so much cheaper. And unless you have a total shit box the Hondas usually required less work and parts.
Maybe it's because I was a broke ass trying to build a 65 nova

Shit, I drove mine for 2 years before I started tearing it apart. Tore it apart, had the LS in the factory front clip, then decided to do a m2 front end. Then decided to sell house, then move in with inlasws for 2 years while building house. Then moved into house. Then had another kid. Then decided to work on property.

Gonna start trying to put work in on this thing so it can hopefully just be able to roll around rather than sit on hack stands 😖
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #913 on: September 30, 2021, 03:06:00 PM »

Shit, I built 3 airplanes and a civic in the time you have been working on this :)
Logged
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~
« Reply #914 on: February 05, 2024, 09:39:17 AM »

We need an update!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

random-strike

  • Certified OG
  • *****
  • Online Online
  • Posts: 19564
Logged
Double doors, marble floors, naked hoes around me

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6786
  • I look around and all I see is Smegheads

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374

Fuck..... I still have it. It still sits. Haven't done anything with it since last post. Kids are finally getting old enough for me to start working on shit again. But......... right now I'm building my shop 40×72×16 Hope to have it done in the next 6 months - year.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6786
  • I look around and all I see is Smegheads

Fuck..... I still have it. It still sits. Haven't done anything with it since last post. Kids are finally getting old enough for me to start working on shit again. But......... right now I'm building my shop 40×72×16 Hope to have it done in the next 6 months - year.

Hell Ya!!!  O0 O0

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374

Well, got some progress on the shop done. Trusses arrived. Totally used the lift and ran a couple of heavy ratchet straps around the scissor lift rail and the top cord of the truss and lifted it into place. Shit worked amazing. Ran out of time and didn't get to finish all my perlins before the lift had to be back. I will rent it again and do all my overhangs and outlooks/facia. So far I'm pretty happy with the outcome. Everything pretty damn straight/plumb/square. Yes I could have paid someone to build it....... but I would have been pissed the whole time because they would do a half ass job and charge me a fuck ton to do it.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6786
  • I look around and all I see is Smegheads

Nice!

Do you happen to know the cost difference from wood building a steel?  :noel:

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374

Nice!

Do you happen to know the cost difference from wood building a steel?  :noel:

I was quoted almost 120k for just the steel building. Ill probably be into the materials for this building for about half that including the concrete. The steel building price did not include the 30k worth of concrete needed for it.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6786
  • I look around and all I see is Smegheads

Ouch!  is the concrete slab reinforced so you can put a lift in it?


Nice!

Do you happen to know the cost difference from wood building a steel?  :noel:

I was quoted almost 120k for just the steel building. Ill probably be into the materials for this building for about half that including the concrete. The steel building price did not include the 30k worth of concrete needed for it.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374

Ouch!  is the concrete slab reinforced so you can put a lift in it?


Nice!

Do you happen to know the cost difference from wood building a steel?  :noel:

I was quoted almost 120k for just the steel building. Ill probably be into the materials for this building for about half that including the concrete. The steel building price did not include the 30k worth of concrete needed for it.

I'm doing radiant heat flooring in the whole shop. So as of right now I have about 3" of 1.25"- crushed basalt gravel down. I'm going to come in with another 2-3" and compact it, then vapor barrier, 2" of ridgid foam insulation. Then ill put down 1/2" pex 1' on center stapled to the foam, #3 or #4 or some other sort of reinforcement (might be galvanized hog panels I'm not sure yet) on top of the pex and then 5" of 6 sac concrete. Should be plenty strong for a lift but I am going to take about a 20'x20' area and do a thickend area for a lift.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437
Pages: 1 ... 29 30 [31]   Go Up