Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[highroller54]

Would I be stupid to think a box stock b18c5 on a p28 in chipped ecu that runs and drives "fine" would still run after a set of 48mm jenvey itb's were installed with the stock injectors or is that too much to ask?

[92CXyD]

Yeah you would have to Alpha-N base tuning

P28 w/ a ITB tune would work but not on a stock ITR tune. 

I know Crome, EcTune, Neptune have ways of ITBs.

I know Crome should be able handle this, maybe shine a CRX cut out in the sky and Leed to come up and help. 

[Minor Threat]

The real question is, why would you bother? Is this for your HT build?

[92CXyD]

The real question is, why would you bother? Is this for your HT build?

I thought Chad was building a OG mini? 

[PhilStubbs]

One time in a pinch I ran a b20V on Crome without alpha-n tuning. I was amazed at how well it ran.

[highroller54]

I thought Chad was building a OG mini? 

Ding!
Was hoping it would at least run/move under its own power until I can get it tuned.

[Minor Threat]

I thought Chad was building a OG mini? 

Ding!
Was hoping it would at least run/move under its own power until I can get it tuned.

If you build a vac manifold and plumb your MAP sensor off of it, it should run well enough to move around.

[highroller54]

Supposed to say non chipped p28

[PhilStubbs]

If the map sensor gets a signal from all cylinders, I wouldn't be surprised if it would move under its own power, but I doubt you would really drive it anywhere

[highroller54]

You think someone could do a basemap to get it better?

[DasPoop]

If memory serves me right the stock ecu will run with itbs it will just be rich down low decent in the middle and lean up top either way i would think it would move around.

[PhilStubbs]

I edited my post. Autocorrect fail