Topic: Cheap turbo - your roots (Read 7130 times)

Lowerit · « **on:** May 23, 2014, 10:14:00 PM »

I want to cheaply turbo my CRX.. the more I talk to people the more I see that the ITB idea is not a great one

I have a TDI intercooler, I have been told that an integra ECU and injectors from the same Gen fit the bill... So lets discuss.. not trying to make a ton of power.. 160whp in the CRX would work well for what I want.. I have an old Alpine tape deck, Fosgate amp and Vaurnet Decal in the back window.. I don't want to change a harness, I don't want to chip an ECU , or get an ostirch.

cheap cheap cheap... cheap.

n/a mike · « **Reply #1 on:** May 23, 2014, 11:35:37 PM »

I don't feel like searching.
What engine do you have?
if you don't want to tune it then go with an fmu.
14b is a good sized small turbo, but I'm not sure about only 160hp

ratcityrex · « **Reply #2 on:** May 24, 2014, 02:21:15 AM »

Afc, dsm 450s and a msd btm.

jdmhatchracer94 · « **Reply #3 on:** May 24, 2014, 04:33:03 PM »

Rhb5 no intercooler map bypass and a sk2 na chip that was my first set up ran great

PhilStubbs · « **Reply #4 on:** May 24, 2014, 10:11:59 PM »

I dont understand not tuning it. it could be much better tuned than not

Lowerit · « **Reply #5 on:** May 24, 2014, 10:24:06 PM »

Quote from: PhilStubbs on May 24, 2014, 10:11:59 PM

I dont understand not tuning it. it could be much better tuned than not

Im lazy

turbohf · « **Reply #6 on:** May 24, 2014, 10:35:37 PM »

Quote from: PhilStubbs on May 24, 2014, 10:11:59 PM

I dont understand not tuning it. it could be much better tuned than not

couple check valves, fmu, and a btm dialed back a degree or so isnt tuned?

turbohf · « **Reply #7 on:** May 24, 2014, 10:37:43 PM »

ps: i vote IHI RHB5 also. plus whatever intercooler fits, if none fit, perfect too.

Sedrostyle · « **Reply #8 on:** May 25, 2014, 02:52:32 AM »

I'd go t28 or t25 whatever it is. Seems like its easier to find manifold adaptors for.
HF manifold everyone else stated the rest.
I have a integra ecu if you wanna buy it.

Ntrain2k · « **Reply #9 on:** May 25, 2014, 10:32:02 AM »

Quote from: Lowerit on May 24, 2014, 10:24:06 PM

Quote from: PhilStubbs on May 24, 2014, 10:11:59 PM
I dont understand not tuning it. it could be much better tuned than not

I like blown up shit

FIFY

Foowee · « **Reply #10 on:** May 25, 2014, 11:14:30 PM »

Is it mpfi or dpfi? Supposedly, in the mid/late 90's, Stephan Papadakis ran 11's w/dpfi, I've been wondering how. I think he used a much larger side feed injector for the secondary. Sized a turbo to match so it would light when the secondary opened. Then it would be fish store check valves on the map sensor n something to retard timing in relation to boost...

turbohf · « **Reply #11 on:** May 25, 2014, 11:16:11 PM »

its a 87 CRX Si...

Foowee · « **Reply #12 on:** May 25, 2014, 11:18:25 PM »

nevermind then...

PhilStubbs · « **Reply #13 on:** May 27, 2014, 03:09:00 PM »

Quote from: turbohf on May 24, 2014, 10:35:37 PM

Quote from: PhilStubbs on May 24, 2014, 10:11:59 PM
I dont understand not tuning it. it could be much better tuned than not

couple check valves, fmu, and a btm dialed back a degree or so isnt tuned?

Considering the fact that he knows multiple people that will properly tune it for free, that method makes no sense to me.

n/a mike · « **Reply #14 on:** May 27, 2014, 07:22:34 PM »

At minimum run a basemap "tune"
gonna buy an ecu anyway

Lowerit · « **Reply #15 on:** May 28, 2014, 10:07:52 PM »

Quote from: PhilStubbs on May 27, 2014, 03:09:00 PM

Quote from: turbohf on May 24, 2014, 10:35:37 PM
Quote from: PhilStubbs on May 24, 2014, 10:11:59 PM
I dont understand not tuning it. it could be much better tuned than not

couple check valves, fmu, and a btm dialed back a degree or so isnt tuned?

Considering the fact that he knows multiple people that will properly tune it for free, that method makes no sense to me.

post pics of your sisters ass.

I Will see you this fall Kneeee Grow

PhilStubbs · « **Reply #16 on:** May 28, 2014, 10:13:46 PM »

SWEEEEEEETTTT!!!! Bringing that pedophile asian boy lover?

HiProfile · « **Reply #17 on:** May 29, 2014, 02:37:32 PM »

Being an 87 makes it a bit harder. The irony is a FMU costs more than a set of DSM450's and a chipped obd0 ecu running turboedit or BRE. Even a basemap will run better & make much more power than an FMU.

Tim · « **Reply #18 on:** May 29, 2014, 05:25:04 PM »

I have an fmu and missing link if someone is shopping

Burntrubber87 · « **Reply #19 on:** June 09, 2014, 08:06:39 AM »

Hobbs switches and Volvo cold start injectors.
Adjustable FPR for the csi fuel circuit, Bleed valves and like others a BTM for "finetuning"... nog.jpg

News:

Author Topic: Cheap turbo - your roots (Read 7130 times)