Topic: Better than any halfcore you could ever put into a crx!!!! Tucked crx radiator. (Read 124392 times)

Joseph Davis · « **Reply #60 on:** March 10, 2010, 03:54:08 AM »

I'll accept donations of v1.0

Kalam · « **Reply #61 on:** March 15, 2012, 11:09:32 AM »

Setup in a 92 Integra

ratcityrex · « **Reply #62 on:** March 15, 2012, 02:00:50 PM »

I know your a noobs and all, but excellent work on the fab skills. Is that some fluxcore action I see? You need a noon post like ASAP

92CXyD · « **Reply #63 on:** March 15, 2012, 02:14:08 PM »

Quote from: ratcityrex on March 15, 2012, 02:00:50 PM

I know your a noobs and all, but excellent work on the fab skills. Is that some fluxcore action I see? You need a noon post like ASAP

Yeap

HiProfile · « **Reply #64 on:** March 16, 2012, 10:06:20 AM »

Quote from: ratcityrex on March 15, 2012, 02:00:50 PM

You need a noon post like ASAP

No excuse: Date Registered: April 12, 2009, 12:16:43 PM

But I second the fabbing. Looks like it was meant for a DA.

Tim · « **Reply #65 on:** March 16, 2012, 01:54:28 PM »

I've had the parts riding around in my trunk to do this for quite a few months, I have a da as well.

4door89 · « **Reply #66 on:** June 10, 2012, 06:04:57 PM »

I ended up doing the samething, but aren't you worried about the lack of support now that there's no lower radiator support there?

I did a 1"x2" bar going across the front.

Sedrostyle · « **Reply #67 on:** July 17, 2014, 01:52:40 AM »

Dead but I want this.

92CXyD · « **Reply #68 on:** July 17, 2014, 08:56:57 AM »

May be dead but I know a project with an aluminum version of that radiator going a heavily boosted civic, thanks to this thread.

Sedrostyle · « **Reply #69 on:** July 20, 2014, 01:45:58 PM »

Mmm hmmm. Its a badass setup. My buddy is trying to talk me out of it.
Saying just to get a skank 2 or stock rad.
But this would be out a the way. And super JDM. : SD

danz · « **Reply #70 on:** July 20, 2014, 03:22:18 PM »

FUck your buddy. He sounds like some douche bag VW owner.

ApexSilver06MR · « **Reply #71 on:** March 09, 2015, 02:06:05 AM »

Bump. I'll be doing this in my car with a stock crossmember.

walter · « **Reply #72 on:** April 05, 2015, 09:01:32 PM »

Just ordered scirocco radiator, i'll try to make samething on my car.. just was wondering what hoses to use on my D16 SOHC engine..

92CXyD · « **Reply #73 on:** April 06, 2015, 01:03:05 AM »

Quote from: walter on April 05, 2015, 09:01:32 PM

Just ordered scirocco radiator, i'll try to make samething on my car.. just was wondering what hoses to use on my D16 SOHC engine..

Should be the same, since the outlets of radiator is on the same side as stock Civic.

walter · « **Reply #74 on:** April 06, 2015, 10:31:58 AM »

sohc use 28mm if i remember correctly instead 32mm as b series and this scirocco radiator..i think it's time to weld aluminum too

i will post pics when it arrives this week.

92CXyD · « **Reply #75 on:** April 06, 2015, 10:47:32 AM »

Quote from: walter on April 06, 2015, 10:31:58 AM

sohc use 28mm if i remember correctly instead 32mm as b series and this scirocco radiator..i think it's time to weld aluminum too i will post pics when it arrives this week.

My stock size silicone coolant hoses fit with a little lubricant.

Ntrain2k · « **Reply #76 on:** April 06, 2015, 07:35:32 PM »

Quote from: 92CXyD on April 06, 2015, 10:47:32 AM

My hose fit with a little lubricant.

That's what she said.

92CXyD · « **Reply #77 on:** April 06, 2015, 11:13:24 PM »

Quote from: Ntrain2k on April 06, 2015, 07:35:32 PM

Quote from: 92CXyD on April 06, 2015, 10:47:32 AM

My hose fit with a little lubricant.

That's what she said.

Yep nice and snug

walter · « **Reply #78 on:** April 08, 2015, 05:45:55 PM »

china 1 layer hoses should works good

walter · « **Reply #79 on:** April 14, 2015, 09:56:40 AM »

received it! looks good...need a lot of work though..

walter · « **Reply #80 on:** October 21, 2015, 08:05:05 AM »

Hi! im in the point to adapt scirocco radiator, my question is about what hoses should i run because i want to use a silicone hoses.

I assume stock D series hoses will not works, does it?

92CXyD · « **Reply #81 on:** October 21, 2015, 09:19:05 AM »

One first page "I used the stock 91 teg lower radiator hose and it worked perfect. For the upper hose I used 1 91 teg upper hose, and a piece of another teg upper hose."

Also used an inline radiator filler for the upper hose.

walter · « **Reply #82 on:** October 21, 2015, 05:25:46 PM »

mi engine is a D16z6 $:-\$

92CXyD · « **Reply #83 on:** October 21, 2015, 05:31:46 PM »

Quote from: walter on October 21, 2015, 05:25:46 PM

mi engine is a D16z6 $:-\$

Same routing

walter · « **Reply #84 on:** October 23, 2015, 04:27:18 AM »

nop, upper is different , inner diameter too, time to fab work. $:-\$

News:

Author Topic: Better than any halfcore you could ever put into a crx!!!! Tucked crx radiator. (Read 124392 times)