Topic: Digi-Key Part #'s 4Bar MAP Sensors (Read 70085 times)

88dx · « **on:** March 08, 2009, 11:05:57 PM »

Anyone know the Part #'s for the 3/4 Bar Map sensors on Digi-key?

lilpooh21186 · « **Reply #1 on:** March 08, 2009, 11:31:56 PM »

thats what im looking for J/E wants Crack money for a gm 3bar

jeffsciv23 · « **Reply #2 on:** March 08, 2009, 11:49:27 PM »

all i could find

http://rocky.digikey.com/WebLib/Motorola/Web%20Data/MPX4250A,%20MPXA4250A%20SERIES.pdf

jeffsciv23 · « **Reply #3 on:** March 08, 2009, 11:57:30 PM »

found this 3 bar

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND

88dx · « **Reply #4 on:** March 09, 2009, 12:18:00 AM »

Quote from: jeffsciv23 on March 08, 2009, 11:57:30 PM

found this 3 bar

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND

The pic dosent show the Circuit board I wonder if you have to buy that separate?

turbohf · « **Reply #5 on:** March 09, 2009, 12:39:41 AM »

the board is a xenocron part.... $:-\$

turbo4life · « **Reply #6 on:** March 09, 2009, 01:51:11 AM »

i got the part numbers for 2 bar and 2.5 bar and 3 and 4 bar map sensor holla nogs

d112crzy · « **Reply #7 on:** March 09, 2009, 02:27:25 AM »

Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again.

88dx · « **Reply #8 on:** March 09, 2009, 02:28:04 AM »

Quote from: turbo4life on March 09, 2009, 01:51:11 AM

i got the part numbers for 2 bar and 2.5 bar and 3 and 4 bar map sensor holla nogs

post them up

jeffsciv23 · « **Reply #9 on:** March 09, 2009, 02:38:21 AM »

Quote from: d112crzy on March 09, 2009, 02:27:25 AM

Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again.

yeah i doubt that will never happen again

Joseph Davis · « **Reply #10 on:** March 09, 2009, 08:58:36 AM »

Freescale (Motorola) no longer sends free samples of any chips to generic email addresses, unless you pay shipping which exceeds what the chips could be purchased for + shipped from Digikey. I tried to get some 1815's the other day and was denied.

dvst8r · « **Reply #11 on:** March 09, 2009, 10:06:44 AM »

JD what do you mean by Generic email addresses? If I send from my work email would they?

shadow · « **Reply #12 on:** March 09, 2009, 03:22:05 PM »

shit i found.

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6400AC6T1CT-ND

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=287-1010-ND

HiProfile · « **Reply #13 on:** March 10, 2009, 03:54:43 AM »

I'm going to free you nogs from Xeno-domination of the Freescale (not motorola, n00bs) MAP sensors. I'll try to post a new DIY to make your own MAP using the stock housing. I already have five special edition PINK omni 4bars, so I'll probably make a 3bar. Madmax did the original write-up, but the pics weren't all that great. Anyways, here's the google cache on it. If it doesnt' work, google "madmax motorola sensor" and click "cached" right below the URL.

http://209.85.173.132/search?q=cache:ZY9NJ4evngYJ:www.homemadeturbo.com/forum/index.php%3Ftopic%3D74311.msg879279+madmax+motorola+sensor&hl=en&ct=clnk&cd=1&gl=us

turbo4life · « **Reply #14 on:** March 10, 2009, 02:42:41 PM »

ya already beat me to it

mpx4250ap is the 2.5 bar $12.7
mpx2200gp is the 2.0 bar $9

HiProfile · « **Reply #15 on:** March 11, 2009, 04:04:51 AM »

mpx2200gp Is a GAUGE sensor. Gauge reads the difference between the port and normal atmosphere. Differential is the difference between the 2 ports. Everything besides ABSOLUTE is useless.

BTW search digikey for "freescale", select "Pressure" under "Sensors, Transducers" section, select "absolute" & filter, then select all voltages besides the 0-40mV. Subtract ~14.5 psi from the max pressure and that's your boy.

Joseph Davis · « **Reply #16 on:** March 11, 2009, 10:03:03 AM »

Quote from: dvst8r on March 09, 2009, 10:06:44 AM

JD what do you mean by Generic email addresses? If I send from my work email would they?

gmail, hotmail, yahoo. I bet an .edu address would work, so should your company.

Quote from: HiProfile on March 11, 2009, 04:04:51 AM

BTW search digikey for "freescale", select "Pressure" under "Sensors, Transducers" section, select "absolute" & filter, then select all voltages besides the 0-40mV. Subtract ~14.5 psi from the max pressure and that's your boy.

Good tech, you n00bs better eat this shit up.

onlyflash944 · « **Reply #17 on:** March 11, 2009, 12:56:18 PM »

i've got a .edu email thats worked for national semiconductor before. freescale dont' have shit that we can use for free samples that i've found

Joseph Davis · « **Reply #18 on:** March 11, 2009, 03:56:48 PM »

Freescale is what became of Motorola's IC and component branch, there's quite a bit of logic/MCU I'd like from them.

onlyflash944 · « **Reply #19 on:** March 11, 2009, 04:31:19 PM »

Quote from: Joseph Davis on March 11, 2009, 03:56:48 PM

Freescale is what became of Motorola's IC and component branch, there's quite a bit of logic/MCU I'd like from them.

let me know if theres a sample you want me to try to get, maybe we can work a trade out for those shift forks

HiProfile · « **Reply #20 on:** March 13, 2009, 02:01:37 AM »

They still offer the g-sensors last time I looked. I've already tried one on my SSI-4: give it voltage, ground, and read the output. They are instant response, and only need the extra resistors/capacitors if you want an ultra-clean output. They're the cheapest g-sensors you'll ever find (~$15 IIRC), if you can't get samples at least. :somb:

As for the MAP sensors, they range from $11-16, and usually $6 for shipping. I should have my DIY MAP Sensor write-up posted soon, so you can have a bolt-on 4bar MAP for a FRACTION of the cost of an Omni/Hondata 4bar.

J. Mills · « **Reply #21 on:** March 14, 2009, 05:34:32 PM »

2.5 bar
Part # MPX4250AP-ND
Price $12.45
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND

3 bar
Part # MPXH6300AC6U-ND
Price $14.36
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND

4 bar
Part # MPXH6400AC6T1CT-ND
Price $14.36
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6T1CT-ND

ApexSilver06MR · « **Reply #22 on:** March 15, 2009, 04:48:48 PM »

you should post 28pin sockets as well....

Zeniceguycrx · « **Reply #23 on:** March 15, 2009, 05:58:47 PM »

Quote from: d112crzy on March 09, 2009, 02:27:25 AM

Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again.

They want deposit money now, I tried to start it again but orig
xeno crushed us

88dx · « **Reply #24 on:** May 06, 2009, 09:26:21 PM »

OK so this is the 4bar I ordered.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND

When you check out make sure you use USPS as shipping, because it is way cheaper.

And here is the spec sheet:

http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf

BoostForLife · « **Reply #25 on:** May 07, 2009, 01:58:49 AM »

That's the correct sensor. I just did this about a month ago, worked perfect.
Practice soldering very small fucking shit before attempting to put this in.
Your car will need a retune completely.

Joseph Davis · « **Reply #26 on:** May 07, 2009, 02:31:21 AM »

I love 4 bar sensors.

88dx · « **Reply #27 on:** May 07, 2009, 11:49:29 PM »

Quote from: Joseph Davis on May 07, 2009, 02:31:21 AM

I love 4 bar sensors.

:yes:

caged · « **Reply #28 on:** May 08, 2009, 05:49:27 AM »

So would these 3 bar sensors be a cheap substitute for a GM 3 bar sensor for a Haltech? or will that not work?

walter · « **Reply #29 on:** May 08, 2009, 11:59:21 AM »

Quote from: 88dx on May 06, 2009, 09:26:21 PM

OK so this is the 4bar I ordered.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND

When you check out make sure you use USPS as shipping, because it is way cheaper.

And here is the spec sheet:

http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf

do u have any how-to for wire to stock one?

News:

Author Topic: Digi-Key Part #'s 4Bar MAP Sensors (Read 70085 times)

BoostForLife