:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: 1 2 [3]   Go Down

Author Topic: turbo miata build thread ***Ripper on pg 3***  (Read 103646 times)

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: turbo miata build thread
« Reply #60 on: May 19, 2012, 03:03:56 AM »
I figured out part of the problem, but haven't fixed it yet. I run EDIS4 igntion, and that is working fine. 2 wires between that and the ECU.

One wire, EDIS tells MS2 engine RPM
Other wire, MS2 tells EDIS how much advance to run.

There's a problem on wire one. I think I'm getting spark all the time, but MS2 is seeing a fluctuation in RPM.

Car will probably be sitting till October... I may get to work on it before then. Whenever I do, I think a MS3X and scrap the EDIS will be the best fix. :)

So, here's a more important question. What T3 turbo do I need to put on to get more power? this 350ish whp ain't gonna cut it.

Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: turbo miata build thread
« Reply #61 on: May 19, 2012, 09:05:47 AM »
Holset
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6859
  • I look around and all I see is Smegheads
Re: turbo miata build thread
« Reply #62 on: May 19, 2012, 10:44:22 AM »
Logged

bouncinofftherevlimiter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 456
Re: turbo miata build thread
« Reply #63 on: May 19, 2012, 11:48:46 AM »
Logged
No longer own a turbo car...

94 Accord, first running 4g63 piston/h22 rod/f22 block &ampamp crank

HX35 18lb 486hp/391tq

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: turbo miata build thread
« Reply #64 on: May 20, 2012, 01:52:50 PM »
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Dirty_Mech_Style

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 83
Re: turbo miata build thread
« Reply #65 on: May 20, 2012, 06:22:14 PM »
Logged
Your local T-56/F414 mechanic

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: turbo miata build thread
« Reply #66 on: October 16, 2012, 07:20:32 PM »
Got it running a little better. Planning to change to a MS3X ecu in the future, still having problems with EIDS4 ignition system. I may try one or two mroe things to fix it, I need to try shielding a couple wires and see if that fixes it.

Ripper vid running 27 lbs. Motor is cutting out in the video, you can tell it takes off at 6K then stumbles up top. Still moves, but makes about 50 more hp up top when first ripping on it after warming it up. hotter it gets, the more it misses up top.

Turbo Miata 20 to 90 mph.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.
Pages: 1 2 [3]   Go Up
« previous next »