:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: flywheel question  (Read 5570 times)

hondawagonsts

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 10
flywheel question
« on: May 31, 2009, 08:36:17 PM »
Ok so I'm going to start putting my car back together next weekend and I wanted to get your input on if I should run a light weight flywhel or a stock one
the setup is
1991 Civic Wagon AWD
D16A6
FJT Vitara slugs
TT rods
Egay cast manifold
T3T4
Freshly rebuilt Trans
LSD Dragger unsprung
450 DSMs
tuned on crome Pro
 
Logged

BoostForLife

  • Guest
Re: flywheel question
« Reply #1 on: May 31, 2009, 08:40:17 PM »
It will rev quicker and put down more power to the wheels with lighter, slightly hurt spool because less load.
Stock one, faster spool, slower revs. Personally I like the light ones because of how quick the motor revs.
Logged

hondawagonsts

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 10
Re: flywheel question
« Reply #2 on: May 31, 2009, 09:04:55 PM »
ok I'll go with the light weight
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: flywheel question
« Reply #3 on: May 31, 2009, 09:09:12 PM »
i would make sure its SFI either way... dont need an flywheel coming apart :-X
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

hondawagonsts

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 10
Re: flywheel question
« Reply #4 on: May 31, 2009, 09:12:47 PM »
fuck I dont know if it SFI or not Ive had it for 8 years. its a JUN flywheel looks like a stock flywheel that was machined down.
Logged

caged

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 364
Re: flywheel question
« Reply #5 on: June 01, 2009, 01:47:02 AM »
Quote from: hondawagonsts on May 31, 2009, 08:36:17 PM
1991 Civic Wagon AWD
Freshly rebuilt Trans
LSD Dragger unsprung
 

Fuck using an unsprung disk on an AWD they are harsh on the drive line and box.
Logged
11.6@126mph 1993 mitsubishi GSR.

AbaZ

  • Out of retirement
  • Administrator
  • Sr. Member
  • *****
  • Offline Offline
  • Posts: 396
    • R-HMT
Re: flywheel question
« Reply #6 on: June 03, 2009, 03:47:00 PM »
Quote from: turbohf on May 31, 2009, 09:09:12 PM
i would make sure its SFI either way... dont need an flywheel coming apart :-X

Because we see lots of flywheels coming apart? 

I'm sure it will be fine, I've shaved the shit out of stock flywheels and have never had a problem. I've also used lots of non SFI flywheels and never have had a problem.

« Last Edit: June 03, 2009, 03:50:03 PM by AbaZ »
Logged
Rick P is like the borg. He comes in and sucks the life out of good web pages. - Anonymous

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: flywheel question
« Reply #7 on: June 04, 2009, 04:30:46 AM »
go heavy or go home.
Logged
OG before the OG'#039#039s
Pages: [1]   Go Up
« previous next »