Topic: good bov for 18ish psi dirty d? (Read 6698 times)

highroller54 · « **on:** August 14, 2009, 12:35:05 AM »

Not looking to spend 200.00 or some shit like that but I need a decent bov that wont leak at 20 psi, I had a greddy type s on the tprc but wasn't really a fan.

Towdogg · « **Reply #1 on:** August 14, 2009, 12:46:05 AM »

Quote from: Cooljnateman on August 14, 2009, 12:39:30 AM

how far was it from the turbo? the closer you get it to the turbo the better they work? but i could b wrong im kinda newb, and dont know if my answer helps with the corralation to your question

Don't make post when you don't know what your talking about.....

Cooljnateman · « **Reply #2 on:** August 14, 2009, 12:49:25 AM »

it magically disapeared

highroller54 · « **Reply #3 on:** August 14, 2009, 12:54:02 AM »

Quote from: c0mpl3x on August 14, 2009, 12:38:39 AM

i have a 1g that i'll dodgegaragemod if you want

I could do that to, I'm thinking something else.

brine04 · « **Reply #4 on:** August 14, 2009, 12:57:12 AM »

why not just pickup a ching chong meow tial 50mm?

Cooljnateman · « **Reply #5 on:** August 14, 2009, 12:59:40 AM »

Quote from: highroller54 on August 14, 2009, 12:35:05 AM

Not looking to spend 200.00 or some shit like that but I need a decent bov that wont leak at 20 psi, I had a greddy type s on the tprc but wasn't really a fan.

i think he had one but it leaked, but i could be wrong

turbob16hatch · « **Reply #6 on:** August 14, 2009, 01:03:21 AM »

greddy type R, idk how they work. but there built to hold lots of boost. or so they say.

highroller54 · « **Reply #7 on:** August 14, 2009, 01:14:50 AM »

Quote from: brine04 on August 14, 2009, 12:57:12 AM

why not just pickup a ching chong meow tial 50mm?

can find one, am I retarded? Isn't that what trevor has?

brine04 · « **Reply #8 on:** August 14, 2009, 01:28:52 AM »

Quote from: highroller54 on August 14, 2009, 01:14:50 AM

Quote from: brine04 on August 14, 2009, 12:57:12 AM
why not just pickup a ching chong meow tial 50mm?

can find one, am I retarded? Isn't that what trevor has?

Yeah he runs one so do I.
http://app.infopia.com/Shop/Control/fp/cat/94144/SFV/31982/sret/12131821321021122019282213212223284217220219288221228223292223240235298243234239230241230237232241248241

highroller54 · « **Reply #9 on:** August 14, 2009, 01:32:29 AM »

Quote from: brine04 on August 14, 2009, 01:28:52 AM

Quote from: highroller54 on August 14, 2009, 01:14:50 AM
Quote from: brine04 on August 14, 2009, 12:57:12 AM
why not just pickup a ching chong meow tial 50mm?

can find one, am I retarded? Isn't that what trevor has?
Yeah he runs one so do I.
http://app.infopia.com/Shop/Control/fp/cat/94144/SFV/31982/sret/12131821321021122019282213212223284217220219288221228223292223240235298243234239230241230237232241248241

fuck ya! Thanks buddy

lilpooh21186 · « **Reply #10 on:** August 14, 2009, 01:47:45 AM »

snapse hands down

danz · « **Reply #11 on:** August 14, 2009, 03:06:00 AM »

i use the jackie chan tial 50mm. no problems at 24psi

HiProfile · « **Reply #12 on:** August 16, 2009, 07:41:10 PM »

Quote from: lilpooh21186 on August 14, 2009, 01:47:45 AM

synapse hands down you pants jerking you as he steals your money & pride

Fixed. Proven junk by people that prove it.

I'm getting annoyed by my type-s too, I think the type-rs and type-r are more whoosh sounds. The type-r is larger and intended to handle more pressure and flow. Otherwise the 50mm if you don't mine "adjusting" the spring.

98vtec · « **Reply #13 on:** August 18, 2009, 12:54:57 AM »

explain? i havent done any research on that BOV since i went with a Tial but i'd like to learn something about it since it did seem good on paper when i first read about it.

trevor72 · « **Reply #14 on:** August 18, 2009, 11:51:25 AM »

ching chong meow tial 50mm works great to 20psi as out of the box tested

ApexSilver06MR · « **Reply #15 on:** August 19, 2009, 04:46:38 PM »

stock wrx

patsmx5 · « **Reply #16 on:** August 19, 2009, 04:51:57 PM »

I'm running the Chinese tial 50mm knockoff. I'm running 14 PSI, but I"ve ran 18 a couple times and it holds fine. By design the diaphram has much more area than the piston, so as boost goes up, there's more and more force keeping it closed than there is trying to open it. It's not ever gonna crack open and leak in boost.

jagojon3 · « **Reply #17 on:** August 19, 2009, 05:19:05 PM »

I've got a crushed DSM that was holding great at 22 psi for sale if you're interested.

Robb · « **Reply #18 on:** August 19, 2009, 07:12:22 PM »

IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov

Synapse are crap. The next person that mentions them is getting e-slapped.

92CXyD · « **Reply #19 on:** August 20, 2009, 07:12:47 AM »

Quote from: Robb on August 19, 2009, 07:12:22 PM

IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov

Synapse are crap. The next person that mentions them is getting e-slapped.

Yeah when I read Synapse BOV earlier I thought I was reading another H-T nut swinging tread. LOL ;D

Pootie · « **Reply #20 on:** August 20, 2009, 10:25:34 AM »

Quote from: 92CXyD on August 20, 2009, 07:12:47 AM

Quote from: Robb on August 19, 2009, 07:12:22 PM
IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov

Synapse are crap. The next person that mentions them is getting e-slapped.

Yeah when I read Synapse BOV earlier I thought I was reading another H-T nut swinging tread. LOL ;D

x2. I am all for "quality" parts. But i don't like the Synapse BOV and even worse are the gates. I had a 50mm and it came apart.

I really like the Real Tial 50mm BOVs if you are going to have a serious build thats going to see a lotttt of boost. But i guess the Type-r/rs and the Chino 50mm are fine on a mild build. I have also had a 1st Gen DSM bov o a previous build and it held close to 20psi.

And Joe runs ones of these things. And i'm pretty sure it sees over 24psi.

News:

Author Topic: good bov for 18ish psi dirty d? (Read 6698 times)