:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: good bov for 18ish psi dirty d?  (Read 9845 times)

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10831
  • Spreading the rhmt word like PB&J
good bov for 18ish psi dirty d?
« on: August 14, 2009, 12:35:05 AM »
Not looking to spend 200.00 or some shit like that but I need a decent bov that wont leak at 20 psi, I had a greddy type s on the tprc but wasn't really a fan.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: good bov for 18ish psi dirty d?
« Reply #1 on: August 14, 2009, 12:46:05 AM »
Quote from: Cooljnateman on August 14, 2009, 12:39:30 AM
how far was it from the turbo? the closer you get it to the turbo the better they work? but i could b wrong im kinda newb, and dont know if my answer helps with the corralation to your question

Don't make post when you don't know what your talking about.....
Logged

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567
Re: good bov for 18ish psi dirty d?
« Reply #2 on: August 14, 2009, 12:49:25 AM »
it magically disapeared
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10831
  • Spreading the rhmt word like PB&J
Re: good bov for 18ish psi dirty d?
« Reply #3 on: August 14, 2009, 12:54:02 AM »
Quote from: c0mpl3x on August 14, 2009, 12:38:39 AM
i have a 1g that i'll dodgegaragemod if you want

I could do that to, I'm thinking something else.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: good bov for 18ish psi dirty d?
« Reply #4 on: August 14, 2009, 12:57:12 AM »
why not just pickup a ching chong meow tial 50mm?
Logged
92GSR - mild interest

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567
Re: good bov for 18ish psi dirty d?
« Reply #5 on: August 14, 2009, 12:59:40 AM »
Quote from: highroller54 on August 14, 2009, 12:35:05 AM
Not looking to spend 200.00 or some shit like that but I need a decent bov that wont leak at 20 psi, I had a greddy type s on the tprc but wasn't really a fan.

i think he had one but it leaked, but i could be wrong
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: good bov for 18ish psi dirty d?
« Reply #6 on: August 14, 2009, 01:03:21 AM »
greddy type R, idk how they work. but there built to hold lots of boost. or so they say.
Logged

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10831
  • Spreading the rhmt word like PB&J
Re: good bov for 18ish psi dirty d?
« Reply #7 on: August 14, 2009, 01:14:50 AM »
Quote from: brine04 on August 14, 2009, 12:57:12 AM
why not just pickup a ching chong meow tial 50mm?

can find one, am I retarded? Isn't that what trevor has?
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: good bov for 18ish psi dirty d?
« Reply #8 on: August 14, 2009, 01:28:52 AM »
Logged
92GSR - mild interest

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10831
  • Spreading the rhmt word like PB&J
Re: good bov for 18ish psi dirty d?
« Reply #9 on: August 14, 2009, 01:32:29 AM »
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: good bov for 18ish psi dirty d?
« Reply #10 on: August 14, 2009, 01:47:45 AM »
snapse hands down
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: good bov for 18ish psi dirty d?
« Reply #11 on: August 14, 2009, 03:06:00 AM »
i use the jackie chan tial 50mm.  no problems at 24psi
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: good bov for 18ish psi dirty d?
« Reply #12 on: August 16, 2009, 07:41:10 PM »
Quote from: lilpooh21186 on August 14, 2009, 01:47:45 AM
synapse hands down you pants jerking you as he steals your money & pride

Fixed. Proven junk by people that prove it.

I'm getting annoyed by my type-s too, I think the type-rs and type-r are more whoosh sounds. The type-r is larger and intended to handle more pressure and flow. Otherwise the 50mm if you don't mine "adjusting" the spring.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

98vtec

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1076
  • try a warm glass of shut the fuck up
    • BBmoto Tuning
Re: good bov for 18ish psi dirty d?
« Reply #13 on: August 18, 2009, 12:54:57 AM »
explain?  i havent done any research on that BOV since i went with a Tial but i'd like to learn something about it since it did seem good on paper when i first read about it.
Logged
xXx Performance Tuning
-- In House DynoJet
SouthEast Neptune Tuner

trevor72

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 467
  • trevwhore
Re: good bov for 18ish psi dirty d?
« Reply #14 on: August 18, 2009, 11:51:25 AM »
ching chong meow tial 50mm works great to 20psi as out of the box tested
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: good bov for 18ish psi dirty d?
« Reply #15 on: August 19, 2009, 04:46:38 PM »
stock wrx
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: good bov for 18ish psi dirty d?
« Reply #16 on: August 19, 2009, 04:51:57 PM »
I'm running the Chinese tial 50mm knockoff. I'm running 14 PSI, but I"ve ran 18 a couple times and it holds fine. By design the diaphram has much more area than the piston, so as boost goes up, there's more and more force keeping it closed than there is trying to open it. It's not ever gonna crack open and leak in boost.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: good bov for 18ish psi dirty d?
« Reply #17 on: August 19, 2009, 05:19:05 PM »
I've got a crushed DSM that was holding great at 22 psi for sale if you're interested.
Logged

Turkey soup pancakes sir

Robb

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4624
  • Meat Popsicle
Re: good bov for 18ish psi dirty d?
« Reply #18 on: August 19, 2009, 07:12:22 PM »
IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov


Synapse are crap.  The next person that mentions them is getting e-slapped.
Logged

blowoff valves are for pussies.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6821
  • I look around and all I see is Smegheads
Re: good bov for 18ish psi dirty d?
« Reply #19 on: August 20, 2009, 07:12:47 AM »
Quote from: Robb on August 19, 2009, 07:12:22 PM
IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov


Synapse are crap.  The next person that mentions them is getting e-slapped.

Yeah when I read Synapse BOV earlier I thought I was reading another H-T nut swinging tread. LOL ;D
Logged

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259
Re: good bov for 18ish psi dirty d?
« Reply #20 on: August 20, 2009, 10:25:34 AM »
Quote from: 92CXyD on August 20, 2009, 07:12:47 AM
Quote from: Robb on August 19, 2009, 07:12:22 PM
IMHO

1. Evo 9 bov
2. DGmod dsm 1g bov
3. Metal 996tt bov


Synapse are crap.  The next person that mentions them is getting e-slapped.


Yeah when I read Synapse BOV earlier I thought I was reading another H-T nut swinging tread. LOL ;D
x2. I am all for "quality" parts. But i don't like the Synapse BOV and even worse are the gates. I had a 50mm and it came apart.

I really like the Real Tial 50mm BOVs if you are going to have a serious build thats going to see a lotttt of boost. But i guess the Type-r/rs and the Chino 50mm are fine on a mild build. I have also had a 1st Gen DSM bov o a previous build and it held close to 20psi.

And Joe runs ones of these things. And i'm pretty sure it sees over 24psi.
« Last Edit: August 20, 2009, 10:30:19 AM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!
Pages: [1]   Go Up
« previous next »