:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Daspoop/Trevor YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Anyone have actual experience with walbro 190lph pumps  (Read 5203 times)

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
Anyone have actual experience with walbro 190lph pumps
« on: September 11, 2009, 10:06:07 AM »

I put one in ages ago thinking no way i would need bigger. But im wondering if i need a 255 to hit 300whp.

16v 4age, 550cc, small 16g

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #1 on: September 11, 2009, 10:22:25 AM »

I put one in ages ago thinking no way i would need bigger. But im wondering if i need a 255 to hit 300whp.

16v 4age, 550cc, small 16g

I would use the 255 just for the insurance.

But I also look at cheapest route first. ;D

jarebear667

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1414
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #2 on: September 11, 2009, 11:00:59 AM »

use an evo 8 pump.
Logged
midwest HMT!

Robb

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4624
  • Meat Popsicle
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #3 on: September 11, 2009, 02:02:08 PM »

use an evo 8 pump.

Those are only rated at 160, despite what the internet would have you believe.  That being said, evo's make 300+ on stock pumps all the time. 

190 is plenty for your application. Change your fuel filter, and watch your afr's.  If you are running out of fuel, you will know. 
Logged

blowoff valves are for pussies.

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #4 on: September 11, 2009, 02:50:19 PM »

In the same subject, what is the rate of honda gas pump?
Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #5 on: September 11, 2009, 04:12:19 PM »

use an evo 8 pump.

Those are only rated at 160, despite what the internet would have you believe.  That being said, evo's make 300+ on stock pumps all the time. 

190 is plenty for your application. Change your fuel filter, and watch your afr's.  If you are running out of fuel, you will know. 

That is pretty much what i figured, thx Rob.  If i add fuel and it doesnt richen then i need a bigger pump.

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #6 on: September 11, 2009, 04:14:33 PM »

miata people use 190HP walbro pumps all the time for 300whp. 255 is kinda overkill, and supposedly at higher pressures and lower volume rates, the 190hp is actually the better pump.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #7 on: September 11, 2009, 10:07:57 PM »

255 is a 650+ whp pump.  What's 74.5% of 650+?


In the same subject, what is the rate of honda gas pump?

If you run 12 gauge power and ground to the factory pump, 325 whp Mustang/375 whp Dynojet.  Honda-Tech will tell you "300 whp" or "impossible"

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #8 on: September 11, 2009, 11:18:50 PM »

255 is a 650+ whp pump.  What's 74.5% of 650+?


In the same subject, what is the rate of honda gas pump?
If you run 12 gauge power and ground to the factory pump, 325 whp Mustang/375 whp Dynojet.  Honda-Tech will tell you "300 whp" or "impossible"
484.2500000000000
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #9 on: September 12, 2009, 01:14:44 AM »

255 is a 650+ whp pump.  What's 74.5% of 650+?


In the same subject, what is the rate of honda gas pump?

If you run 12 gauge power and ground to the factory pump, 325 whp Mustang/375 whp Dynojet.  Honda-Tech will tell you "300 whp" or "impossible"

Good to know. I don't think I make more than 250whp
Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

caged

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 364
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #10 on: September 12, 2009, 04:39:48 AM »

There are lots of CDM 190lph pumps out there which iv seen a few problems, I run a genuine 190lph walbro and im around 300rwhp.
Logged
11.6@126mph 1993 mitsubishi GSR.

Robb

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4624
  • Meat Popsicle
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #11 on: September 12, 2009, 10:09:19 AM »

There are lots of CDM 190lph pumps out there which iv seen a few problems, I run a genuine 190lph walbro and im around 300rwhp.

Seems like the CDM pumps are hit and miss.  Ive ran them in my last 3 builds with no problems.
Logged

blowoff valves are for pussies.

caged

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 364
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #12 on: September 12, 2009, 04:47:17 PM »

There are lots of CDM 190lph pumps out there which iv seen a few problems, I run a genuine 190lph walbro and im around 300rwhp.

Seems like the CDM pumps are hit and miss.  Ive ran them in my last 3 builds with no problems.

That pretty much sums up CDM parts, hit and miss lol
Logged
11.6@126mph 1993 mitsubishi GSR.

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #13 on: September 12, 2009, 05:05:30 PM »

There are lots of CDM 190lph pumps out there which iv seen a few problems, I run a genuine 190lph walbro and im around 300rwhp.

Seems like the CDM pumps are hit and miss.  Ive ran them in my last 3 builds with no problems.

That pretty much sums up CDM parts, hit and miss lol

I was gonna say the same thing, blanket statement right there.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #14 on: September 12, 2009, 05:49:17 PM »

There are lots of CDM 190lph pumps out there which iv seen a few problems, I run a genuine 190lph walbro and im around 300rwhp.

I've never seen or heard of a problem with the CDM 255's.  Which are what most people who think they have Walbros actually have.

caged

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 364
Re: Anyone have actual experience with walbro 190lph pumps
« Reply #15 on: September 13, 2009, 05:58:25 AM »

1st one stripped the plastic gears and the second one just went dead. mabey its cause im on the other side of the equator, water swirls in the opposite direction apparantly :yes:
Logged
11.6@126mph 1993 mitsubishi GSR.
Pages: [1]   Go Up