:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: 1 2 3 [4] 5 6 ... 17   Go Down

Author Topic: What happens when you are never happy with you car's power ( My Turbo Build) 56K  (Read 144305 times)

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

i would raise that front up more, those slicks are gonna rub bad at the top end of the track and really really bad when you hit the brakes to slow.

 i actually made a few passes with them , and hit the brakes harddd, and the fender never made contact with the slick at all.. i was suprised. But i did raise the car up , better safe than sorry . Thoes were old pix!!. i have a full 2" between slick to fender.
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

nice to see one more 600whp honda on here. Vids are a must on this one.

 It is raining allll the damn week!!

 fuck you mother nature, fuck you with a dirty dick!!

looks like the next good day is Wed (So i'll head to Etown for test n tune) Should have some in-car video.!
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

d-rail

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1005

nice to see one more 600whp honda on here. Vids are a must on this one.

 It is raining allll the damn week!!

 fuck you mother nature, fuck you with a dirty dick!!

looks like the next good day is Wed (So i'll head to Etown for test n tune) Should have some in-car video.!
    Better That's some Shit we all want to see.
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note

nog setting in the rain ftw
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

nog setting in the rain ftw

i don't really want to see how much i can feather the gas!!

 i want a all out pass at the track. get this puppy to streath it's legs a bit
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

d-rail

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1005

nog setting in the rain ftw

i don't really want to see how much i can feather the gas!!

 i want a all out pass at the track. get this puppy to streath it's legs a bit

We can all appreciate that put smoke rolling panty droppers kick ass
Logged

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

well i woke up and all seems good t go for today!!

cross fingers and toes!!

Because i'm running at summer slam this coming weekend in the 11.50 index. I'll mostly be trying to dial the car in as close to 11.50 as possible.

Plus i don't want to have them flag my car, since i have no cage.

after the event i'll be back to go faster. I'll just make 60 foot passes, if i see anything in the 1.6's on the board i'm going to run all out.
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

well whats new!!

 It rained AGAIN!!

next chance to drive this damn thing is Saturday!
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560

Pootie nice build lets see some 9"s  8)
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560

what size r them slicks???????
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

what size r them slicks???????

 thanks , and they are MH 24.5" x 8.5" x 13"..
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!

This damn rain needs to let up already!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259



 been slacking soo bad with the car.. But i'm making it look better. :-\ (please excuse the hood sticker)
« Last Edit: August 01, 2009, 11:18:16 PM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

TheMadScientist

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1937
  • I'm like Batman and Shit

when you gonna run it at the track?
Logged
Why would I not be surprised if your pink slip included "quotquotthen Mr Davis overturned the table while shouting, HOWS THAT FOR FLUID MECHANICS?!"quotquot?

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!

How was the photo shoot? I heard you met both Joe's.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

when you gonna run it at the track?

This Wed at Etown (if it dosent rain).. Or Friday for sure.

Then next Wed, Then Honda Day at Etown on the 18th.

I made a pass on slicks on a strip that i use to test the car out on when i can't get to the track ..(like a 3 mile stretch). Using that Iphone app "dynolicious". And it went 10.90@134mph on a unprepped surface.

So i'll deff have to lift shift and sandbag a bit  not to get booted. (no cage yet). Should be able to get a 8-point in b4 Honda Day
« Last Edit: August 03, 2009, 10:14:10 AM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

How was the photo shoot? I heard you met both Joe's.
The shoot was good. Fun times!!

and yea both Joe/s are great guys. I'm trying to get fast Joe to come to the track with me on Friday.
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

jarebear667

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1414

loosen your fender bolts and adjust your gaps, always make em look nicer
Logged
midwest HMT!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

loosen your fender bolts and adjust your gaps, always make em look nicer
im not too concerned with it. The bumper comes off about 5 times a week. i have to take it off everytime i put it on the trailer.. And  the gap on that side is the cooler piping. It was good with 2.5", but went i went 3" it made a gap at teh headlight.(But if i cut more on that side it will not match the other side).
« Last Edit: August 03, 2009, 01:55:35 PM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

jarebear667

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1414

none of that has to do with your hood to fender gap by the headlight loosen the bolt and the one behind it and pull it out and snug em up when you acheive an even gap? i understand bumper gaps mine was the same.
Logged
midwest HMT!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

none of that has to do with your hood to fender gap by the headlight loosen the bolt and the one behind it and pull it out and snug em up when you acheive an even gap? i understand bumper gaps mine was the same.

ahhhhh!!
 got ya!!
It's hard to see in that pic. but my hood is "raked" about an inch in the back to let hot air out from the bay.  So yea there is a obvious "gap".
« Last Edit: August 03, 2009, 06:58:03 PM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374

Did you know that when you rake your hood you are forcing air into your engine bay due to the fact that at the base of your windshild is a highpressure area, this is how the cowl inductions works on some of the earlyer mucle cars. Now if you know that then nevermind. But alot of people think that if you rake the hood it will let hot air out of the rear of the hood while moving and thats not the case.



Back on point, Did you run at the track yet? Man I would relay like to see some numbers from this bitch!!!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

Did you know that when you rake your hood you are forcing air into your engine bay due to the fact that at the base of your windshild is a highpressure area, this is how the cowl inductions works on some of the earlyer mucle cars. Now if you know that then nevermind. But alot of people think that if you rake the hood it will let hot air out of the rear of the hood while moving and thats not the case.



Back on point, Did you run at the track yet? Man I would relay like to see some numbers from this bitch!!!

 shitt!! Good info. I actually did not know that. The main thing is i don't want the turbo taking in hot air. I will set the hood back to Regular once i can find a driverside headlight to mod into a intake for the turbo.

But as far as getting some #'s out this bitch, no1 wants that more tham myself. I went to the track a few times with some issues. BUT ALLL THAT IS  SORTED OUT!!

so Friday will be the day. I will have  footage and a slip (if they let me keep it) :?:
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds

it is good info

the only time the hood tilt will help is when you are sitting still in traffic
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

it is good info

the only time the hood tilt will help is when you are sitting still in traffic

 sitting still in the stageing lanes? ;D

footnotes:

*The car will be on 22psi on Friday (552whp).
*on a 24.5" x 8" x13" slick
*weight with me is about 2520lbs
Looking for a 11.50 ::)
« Last Edit: August 03, 2009, 07:48:51 PM by Pootie »
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

AJxr

  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • i aint ur buddy pal

good luck man! dont break anything i wanna see this thing run at honda day.
Logged
90 hatch
stock b18b1, b16 lsd trans, holset h1c
11.75@114.75mph, 1.76 60 foot. 14psi - retired

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567

Actually that hood idea with the cowling is false it drops the internal temp by about 13 degrees, and it does not cowl, super street put that "JDM lift" to the test, and the arguement about wee it really started, in cali or with the JDM crew. ill try and find a link since i read it on my super street, or import tuners iphone app
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567

http://www.importtuner.com/tech/impp_0909_jdm_hood_prop/index.html

BOOM....so yah i recommened the hood prop according to this article
there are other atricles as well if anyone wants a 2nd source
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!

Pootie

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 259

http://www.importtuner.com/tech/impp_0909_jdm_hood_prop/index.html

BOOM....so yah i recommened the hood prop according to this article
there are other atricles as well if anyone wants a 2nd source
intresting!!

http://www.importtuner.com/tech/impp_0909_jdm_hood_prop/photo_06.html

  8)

any info to prove this wrong.. So that looks pretty solid!!
Logged
Stock sleeve LsVtec 552whp@22psi.. 600whp+@28psi
Tuned by you know who! ;-)
10.64@137mph , 20psi nbspnbsp nbspnbsp <ltlt~ An ET that a certin Turbo Accord on here will NEVER reach! Even with a bag of porkring taped to a pole infront his windshild!

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!

How was the photo shoot? I heard you met both Joe's.
The shoot was good. Fun times!!

and yea both Joe/s are great guys. I'm trying to get fast Joe to come to the track with me on Friday.

His track is Island, he does not really like E-town. A few friends and I are going there this friday, my crx is down but I might have some fun with my 6.0l yukon and see what she can do :noel:

Pm me if you change your mind and head towards island!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.
Pages: 1 2 3 [4] 5 6 ... 17   Go Up