Topic: New problems.. Aight im only boosting 5psi max. Damn Diaphragm (Read 51296 times)

ApexSilver06MR · « **on:** March 07, 2009, 05:24:25 PM »

Nigga Edit : I think the diaphragm is fucked in the wastegate. Checking that shit out tomorrow. Wont go past 5psi, even with the hose unhooked off of the cdm wastegate. Last time i ran just off of the spring, it was a 14psi. Opening up wastegate tomorrow!!!

as most of you know. i put i new b20 in the teg....

im fired up to start it..

crank.... idle...die...code 7

i swapped throttle bodies with a good one that i had laying around. same shit..

checked grounds and its all good....

i cant find the way to trace back tps wiring and im too lazy to spend time searching.

help a nigga out

ApexSilver06MR · « **Reply #1 on:** March 07, 2009, 06:12:41 PM »

shit... checked voltage at tps and ecu. its all good

chris · « **Reply #2 on:** March 07, 2009, 06:17:27 PM »

Unplug the tps all together and start the car. See it the car reacts differently.

ratcityrex · « **Reply #3 on:** March 07, 2009, 06:18:24 PM »

tps and map plugs switched?

DmC · « **Reply #4 on:** March 07, 2009, 06:37:05 PM »

Quote from: ratcityrex on March 07, 2009, 06:18:24 PM

tps and map plugs switched?

probably a 90% chance of that being the case.

ApexSilver06MR · « **Reply #5 on:** March 07, 2009, 06:43:01 PM »

Quote from: DmC on March 07, 2009, 06:37:05 PM

Quote from: ratcityrex on March 07, 2009, 06:18:24 PM
tps and map plugs switched?
probably a 90% chance of that being the case.

cant be. map is on the driver side with the tps on the pass side

chris · « **Reply #6 on:** March 07, 2009, 06:47:36 PM »

He has 1990 integra aka map sensor is a vacuum line and the sensor is on the fiewall no reason to unclip the map on the firewall during engine removal

Unplug the tps and see how the car runs

ApexSilver06MR · « **Reply #7 on:** March 07, 2009, 06:52:39 PM »

Quote from: chris on March 07, 2009, 06:47:36 PM

He has 1990 integra aka map sensor is a vacuum line and the sensor is on the fiewall no reason to unclip the map on the firewall during engine removal

Unplug the tps and see how the car runs

same shit

ratcityrex · « **Reply #8 on:** March 07, 2009, 06:53:27 PM »

Quote from: ApexSilver06MR on March 07, 2009, 05:24:25 PM

as most of you know. i put i new b20 in the teg....

I didnt know what year, but dose he have a later model tb with the map on it maybe?

ApexSilver06MR · « **Reply #9 on:** March 07, 2009, 06:54:22 PM »

90 obd0

map on firewall

ratcityrex · « **Reply #10 on:** March 07, 2009, 06:56:11 PM »

ok, well im pretty sure that that is probably not your problem then

ApexSilver06MR · « **Reply #11 on:** March 07, 2009, 06:59:14 PM »

ok

well i hooked up the battery charger to give it a jump. The fuckin gauges went crazy and shit.... wtf is going on here. ive fucked checked everything like 10x

chris · « **Reply #12 on:** March 07, 2009, 06:59:45 PM »

Thermostat ground

ApexSilver06MR · « **Reply #13 on:** March 07, 2009, 07:00:41 PM »

Quote from: chris on March 07, 2009, 06:59:45 PM

Thermostat ground

already checked and tightened over and over and over again

chris · « **Reply #14 on:** March 07, 2009, 07:05:48 PM »

alternator ground

ApexSilver06MR · « **Reply #15 on:** March 07, 2009, 07:07:27 PM »

^^^ what alternator ground?

?

chris · « **Reply #16 on:** March 07, 2009, 07:23:58 PM »

Im a dumby the power wire held by 10mm bolt.

ApexSilver06MR · « **Reply #17 on:** March 07, 2009, 07:30:07 PM »

^^^^^

thats a power wire nog....

i finally got to prove chris wrong.. on the phone at that.. damn im a fucking gangster

ApexSilver06MR · « **Reply #18 on:** March 07, 2009, 07:51:22 PM »

alright. took off of map sensor hose. let me remind you that this is a motorola 2.5bar map....

it idles... what the fuck is this going on. i put it back on and im back to square one......

chris · « **Reply #19 on:** March 07, 2009, 07:52:37 PM »

Those have a history of having problems

ApexSilver06MR · « **Reply #20 on:** March 07, 2009, 08:38:20 PM »

going to see peter [turbo4life] getting a chip burned for a stock map sensor

chris · « **Reply #21 on:** March 07, 2009, 10:13:39 PM »

pay him in vodka

98vtec · « **Reply #22 on:** March 07, 2009, 10:15:28 PM »

describe "crazy and shit"

ApexSilver06MR · « **Reply #23 on:** March 08, 2009, 12:48:58 AM »

Quote from: c0mpl3x on March 08, 2009, 12:47:19 AM

tightening a ground DOES NOT magically make a dirty ground get cleared up. you only run the risk of damaging your threads.

take it off, get some 320gr sandpaper, clean the shit up and give a LIGHT LIGHT LIGHT coating on dielectric (silicone grease basically)

i was saying that just to state that i checked everything 10x.

its a map sensor problem

ApexSilver06MR · « **Reply #24 on:** March 08, 2009, 08:12:59 PM »

new chip burned for stock map sensor.... here we go!

ApexSilver06MR · « **Reply #25 on:** March 08, 2009, 09:54:51 PM »

aight.... fuck.... same fuckin shit...

it seems like that something is cutting back the spark when i give it gas

turbo4life · « **Reply #26 on:** March 09, 2009, 03:31:05 AM »

Quote from: chris maletsky on March 07, 2009, 10:13:39 PM

pay him in vodka

i perfer cash as i can get vodka free thanks for the comment cris you nigga/

JAY shit not running dam i have to take a look at it!!

turbo4life · « **Reply #27 on:** March 09, 2009, 03:35:32 AM »

jay take a vohm meter and check to make sure the wires to the tps are all not broken and have a connection.. ya know. then maybe swap a tb or tps i have a extra da throttle if you need and a spare tps somwehere

ApexSilver06MR · « **Reply #28 on:** March 09, 2009, 03:36:58 AM »

Quote from: turbo4life on March 09, 2009, 03:35:32 AM

jay take a vohm meter and check to make sure the wires to the tps are all not broken and have a connection.. ya know. then maybe swap a tb or tps i have a extra da throttle if you need and a spare tps somwehere

i already ruled that shit out. replaced throttle body.. same shit...

checked tps voltage at tps and at the ecu. everything checks out. main relay?

ApexSilver06MR · « **Reply #29 on:** March 09, 2009, 06:38:11 PM »

dizzy???

News:

Author Topic: New problems.. Aight im only boosting 5psi max. Damn Diaphragm (Read 51296 times)

chris

chris

chris

chris

chris

chris

chris