Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 25069 times)

hatchbox90 · « **on:** April 11, 2009, 10:20:41 PM »

Ok so ive been out of the honda stuff for a while and i recently purchased a crx

my setup is

lsvtacH!!!!!!!!!!
81.5mm GE sleeved
CP 9.5:1 pistons
eagle rods
ITR head
broken ~~crower stage 2 turbo cams~~
supertech valves/springs/retainers
slightly p/p
skunk2 pro series intake manifold portmatched runners and TB, will be done by Chris when my manifold gets here

74mm throttlebody
csaddict mini ram
Holset HE351cw
4"down pipe
stealthmode oil lines
Tial 44mm wastegate
Tial knockoff BOV
ebay intercooler
4bar map sensor
precision 1000cc
Walbro 255

Im trying to get this done before the NW dyno meet but i dont think i will make it, and im hoping to get leed to tune this thing if i do make it

Im looking for maybe 500 horses on whatever amount of boost but 400 will be fine, this is my daily driver too so it will be pretty damn fun. I have yet to purchase LSD for my tranny bexause funds are running low, now for the pics.

Test fitting the intercooler, not sure if i want to paint it black or keep it blingy

Perfect fit for the front bumper, im going to try to get away without cutting anything off

this weekend Ryan and I fabbed up the charge pipes and downpipe. We had to stop because i was short a few things, 4" Pie cut downpipe FTW

Ordered the missing items that i needed and some more pipe for the dumptube and downpipe

Startup video, sounds good.

http://www.youtube.com/watch?v=dfT7XJy99NA#lq-lq2-hq-vhq

CSaddict · « **Reply #1 on:** April 11, 2009, 10:35:24 PM »

Solid looking build!! That turbo is a huge bitch.

crxvtec91 · « **Reply #2 on:** April 11, 2009, 10:47:07 PM »

Really clean setup. Did you degree the cams? Also was the block deck after the sleeves where put int? Sompl3x stfu.

widebody93 · « **Reply #3 on:** April 11, 2009, 11:19:51 PM »

Thats looks sweeeeet ;D
is that the manifold that CS addict made?

crxvtec91 · « **Reply #4 on:** April 12, 2009, 01:09:10 AM »

Quote from: hatchbox90 on April 11, 2009, 10:20:41 PM

I wanna thank Dave(csaddict) for the bad ass Manifold,

Quote from: widebody93 on April 11, 2009, 11:19:51 PM

Thats looks sweeeeet ;D
is that the manifold that CS addict made?

hatchbox90 · « **Reply #5 on:** April 12, 2009, 02:45:55 AM »

Well i purchased the complete block from a guy in vancouver WA, it had about 2000 miles on it if that. Unsure of the block being decked or not The cams are not degreed, wasnt sure if spending money on cam gears would be worth it or not. Yes the manifold was built by Dave. Top notch welding right there.

Im drunk and Jenna (feona) ius throwing up right now

DAve, the manifold is fucking sweeet, your welds are amazing

. Ill try to keep this updated. HOPEFULLY ill have this setup in and running in about 2 or 3 weeks, all i need if my intake manifold and TB bored and shit and ill be ready to go. But it dependsa on my work schedule

ryan89crx · « **Reply #6 on:** April 12, 2009, 02:56:00 AM »

dont forget pics of the rhd ef8

this fucker is gonna rip tits. got a nice set of Precision 1000cc injectors sitting on my counter just waiting to be put in this fucker

Rosario4124 · « **Reply #7 on:** April 12, 2009, 01:02:05 PM »

Quote from: c0mpl3x on April 11, 2009, 10:22:27 PM

brake line would make for a neater plumbing job for the vtec feed

that how my feed for my turbo is Hard brake lines FTW

boostinallday · « **Reply #8 on:** April 12, 2009, 01:30:38 PM »

looks good. good work dave!

B16Drag · « **Reply #9 on:** April 21, 2009, 12:51:53 AM »

Looks sweet buddy. Might want to work out the lil kink the VTEC line so it doesnt torque like what it is doing in the pic.

caged · « **Reply #10 on:** April 21, 2009, 03:28:06 AM »

Nice build. Hey I like how neat / sleeper the front bar is, any chance of a pic with the bar off??

hatchbox90 · « **Reply #11 on:** April 21, 2009, 09:08:21 AM »

Quote from: caged on April 21, 2009, 03:28:06 AM

Nice build. Hey I like how neat / sleeper the front bar is, any chance of a pic with the bar off??

I forgot my camera when we were welding the DP/charge pipes

ApexSilver06MR · « **Reply #12 on:** April 21, 2009, 11:16:57 AM »

shit looks good Levi

hatchbox90 · « **Reply #13 on:** April 21, 2009, 07:15:41 PM »

Quote from: ApexSilver06MR on April 21, 2009, 11:16:57 AM

shit looks good Levi

who the fuck is levi

BoostForLife · « **Reply #14 on:** April 21, 2009, 08:27:37 PM »

urban indian

PARTIZAN · « **Reply #15 on:** May 02, 2009, 06:56:02 PM »

that turbo looks cool, I see everyone using same turbo, Is it good?

Wicked · « **Reply #16 on:** May 02, 2009, 08:05:59 PM »

Quote from: PARTIZAN on May 02, 2009, 06:56:02 PM

that turbo looks cool, I see everyone using same turbo, Is it good I am too stupid to hit the search button

Conceptz-X · « **Reply #17 on:** May 02, 2009, 08:23:42 PM »

PARTIZAN, I don't think you will find your half russian flag icon very welcome here. Though many of us dislike the direction of this country, the American flag still stands for freedom and should never be in any way associated with communism

turbo4life · « **Reply #18 on:** May 05, 2009, 03:44:46 AM »

sick is that a vgt holset your runnign?

caged · « **Reply #19 on:** May 05, 2009, 05:19:26 AM »

Quote from: caged on April 21, 2009, 03:28:06 AM

Nice build. Hey I like how neat / sleeper the front bar is, any chance of a pic with the bar off??

I meant a pic with the bar off and the intercooler hooked up. What dimensions are the intercooler?

ryan89crx · « **Reply #20 on:** May 05, 2009, 07:43:22 AM »

Quote from: turbo4life on May 05, 2009, 03:44:46 AM

sick is that a vgt holset your runnign?

no, its the he351 from the cummins 5.9, the vgt came off the 6.7

hatchbox90 · « **Reply #21 on:** May 05, 2009, 04:47:34 PM »

Quote from: caged on May 05, 2009, 05:19:26 AM

Quote from: caged on April 21, 2009, 03:28:06 AM
Nice build. Hey I like how neat / sleeper the front bar is, any chance of a pic with the bar off??

I meant a pic with the bar off and the intercooler hooked up. What dimensions are the intercooler?

I dont get what your saying still, What bar are you talking about?

caged · « **Reply #22 on:** May 05, 2009, 05:35:01 PM »

Front bar=front bumper lol. Sorry for the confusion, Im just trying to work out how big the intercooler is and how you hooked up the intercooler pipes with out having to cut huge holes in your bumper. I want a nice stealth install like that for my ef im building.

hatchbox90 · « **Reply #23 on:** May 05, 2009, 08:36:46 PM »

Quote from: caged on May 05, 2009, 05:35:01 PM

Front bar=front bumper lol. Sorry for the confusion, Im just trying to work out how big the intercooler is and how you hooked up the intercooler pipes with out having to cut huge holes in your bumper. I want a nice stealth install like that for my ef im building.

Well i gave you the dimensions, i didnt cut a damn thing on my bumper. Only thing is that the charge pipes are going to be a bitch because of the fog lights.

Other than that i took out my power steering cooler that was behind the ac and just looped it(because i really dont need my PS to be cooled) and i think i moved one of my horns over just a wee bit. I marked the center between the headlights and marked the center of the cooler and wa la, fits good but not perfect, but its better than a mangled front bumper and it will hide my intercooler well

onlyflash944 · « **Reply #24 on:** May 05, 2009, 08:50:59 PM »

Quote from: turbo4life on May 05, 2009, 03:44:46 AM

sick is that a vgt holset your runnign?

correct me if i'm wrong, but aren't most vgt turbos internal waste gate free?

Budget_SI · « **Reply #25 on:** May 05, 2009, 09:00:19 PM »

thats an awesome build man, love the piecut downpipe

hatchbox90 · « **Reply #26 on:** May 11, 2009, 10:24:57 PM »

So this friday i started ripping the stock motor out of the rex, by midnight friday the motor was out and it was time to sleep. Saterday i kinda cleaned the engine bay up a little and ran my wideband so it tucked close to the frame of the car in the engine bay, Converted to obd1 and finished welding my downpipe and dumptube. spraypainted and heatwrapped on sunday and today my camera decided to hold a little bit of battery power so i could actually turn the fucking thing on.

All im waiting for is my intake manifold and alternator and this bitch is going in. Ill take pics of the monster TB when it comes back with the intake mani. Thanks Chris

4" Downpipe clears the radiator by about 1/2 inch

with no gangster lean

Motor should be in before or by this weekend, more pics to follow. Any thoughts or opinions are welcome

CmR333 · « **Reply #27 on:** May 11, 2009, 10:47:50 PM »

fuckin sweet setup!. that pie cut d/p ftmfw

speedjunky01 · « **Reply #28 on:** May 11, 2009, 10:49:36 PM »

wow nice job on this man

liking the WG routing and all the wrap

turbo4life · « **Reply #29 on:** May 12, 2009, 04:20:38 AM »

too much hp lol

News:

Author Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 25069 times)

BoostForLife

PARTIZAN

Wicked