Topic: 1995 geo metro build log NSFW (Read 37400 times)

jeremy_nash · « **on:** November 11, 2011, 07:48:43 PM »

1995 geo metro

busted ass 1 liter 3 cyl motor

Me and a friend pulling the old motor
me

friend

drain bung (1/2" Galv. coupling) flux cored onto pan

TBI hat 4"pvc cap with 2.5"od inlet pvc glued, then fiberglassed for strength

tits and ass

and since it's a mini-car, how bout some midget porn?!

jabberwock · « **Reply #1 on:** November 11, 2011, 08:33:00 PM »

You had me at midget porn

turbohf · « **Reply #2 on:** November 11, 2011, 10:57:38 PM »

Quote from: jabberwock on November 11, 2011, 08:33:00 PM

You had me at midget porn

that might be a first on rHMT?

PhilStubbs · « **Reply #3 on:** November 12, 2011, 08:08:07 AM »

Kind of a loop hole. I have seen midget porn here for various reasons, but never thrown in as if it were regular porn. Well played sir

jeremy_nash · « **Reply #4 on:** November 17, 2011, 03:06:42 AM »

bought a flux core welder today, $89.99 at harbor freight. http://www.harborfreight.com/90-amp-flux-wire-welder-98871.html
Also got my weld els and tees ordered.
not much progress, so here's some more mini pics!

jeremy_nash · « **Reply #5 on:** December 04, 2011, 01:40:58 AM »

TurboVFR · « **Reply #6 on:** December 18, 2011, 12:20:10 PM »

This guys expression is fucking priceless. "Is it really worth it? I'm fucking a midget shaped like a fire hydrant.."

slappynuts · « **Reply #7 on:** December 19, 2011, 09:49:39 AM »

You have to start out small

jeremy_nash · « **Reply #8 on:** December 24, 2011, 12:43:50 AM »

got the head flange cut out finally. rough cut with oxy/acetylene, then hit the ports with manual milling machine at work.

jeremy_nash · « **Reply #9 on:** January 04, 2012, 02:01:28 AM »

ready to bolt on!

t_cel_t · « **Reply #10 on:** January 07, 2012, 02:39:47 AM »

Quote from: jeremy_nash on January 04, 2012, 02:01:28 AM

ready to bolt on!

gangster as fuck

jeremy_nash · « **Reply #11 on:** January 12, 2012, 03:30:13 AM »

dropped in a TRE PERFORMANCE 255 pump out of a fucking minivan, yep used bitches, its the

in me!

cut the stock bracket to hell with a cutoff wheel, "new" pump is held in with a hose clamp. pump was 1/2 inch too long so we took a hammer and a board and beat a relief into the bottom of the tank

SDRAWKCAB · « **Reply #12 on:** January 13, 2012, 01:52:30 AM »

I dont know what more shocking the porn or the fact someone is spending time boosting a metro. LOL

Ntrain2k · « **Reply #13 on:** January 13, 2012, 07:57:41 AM »

midget porn freaks me out.

jeremy_nash · « **Reply #14 on:** January 13, 2012, 02:46:30 PM »

Ntrain2k · « **Reply #15 on:** January 13, 2012, 03:41:11 PM »

gangster

92CXyD · « **Reply #16 on:** January 13, 2012, 03:49:05 PM »

This is the kind of off the beat path build I like to see.

Keep it coming

JACER63 · « **Reply #17 on:** January 13, 2012, 03:53:23 PM »

that mani is ulgy as fuck.. i love it!! 3 cly of fury

jeremy_nash · « **Reply #18 on:** January 13, 2012, 07:06:46 PM »

Quote from: SDRAWKCAB on January 13, 2012, 01:52:30 AM

I dont know what more shocking the porn or the fact someone is spending time boosting a metro. LOL

both?

brine04 · « **Reply #19 on:** January 13, 2012, 11:23:50 PM »

fuck yes, you got the black whorenet all sorts of beat.

jeremy_nash · « **Reply #20 on:** January 15, 2012, 11:47:39 PM »

Manifold is finished. now to iron out a few other things, pick up some oil feed and drain tubing, and I should be set and ready to start bolting stuff on! it will all have to be done over the course of a weekend, as the car is my daily driver. if all else fails, I have an suv to drive, it's just a thirsty machine!

Thinking about doing a heat shield to cover the manifold and turbo all up, and keep temps down.

.

.

jeremy_nash · « **Reply #21 on:** January 16, 2012, 07:29:47 PM »

Ntrain2k · « **Reply #22 on:** January 16, 2012, 08:07:46 PM »

geo=fapworthy

midget porn=creepy

AstroVannin · « **Reply #23 on:** January 19, 2012, 10:18:12 PM »

Shit is mad gangster.

Makes my Tercel look weak

t_cel_t · « **Reply #24 on:** January 21, 2012, 08:33:50 PM »

never plan on changing the oil?

jeremy_nash · « **Reply #25 on:** January 22, 2012, 12:00:15 AM »

Quote from: t_cel_t on January 21, 2012, 08:33:50 PM

never plan on changing the oil?

I know some dumbasses that change the filter and not the oil. I'm going the other way, change the oil and not the filter.

oil filter off a 90's Toyota corolla will fit it and is 1/2 inch shorter than stock filter. with stock filter it's got 3/4 inch clearance to downpipe

Random Hero · « **Reply #26 on:** January 24, 2012, 02:53:46 AM »

Sweet project. I like that the AC compressor is as big as the engine.

jeremy_nash · « **Reply #27 on:** November 11, 2012, 11:18:58 PM »

started bolting shit on, nothing fit, ac condensor in the way, moved it in front of the core support. then the regular radiator was in the way, said fuck it and took manifold back off. bought an outlet flange from weir, but it's just serving duty as a paperweight on my desk.

j.h.christ · « **Reply #28 on:** November 12, 2012, 12:35:39 AM »

probably my favorite build thread ever.

Joseph Davis · « **Reply #29 on:** November 12, 2012, 10:34:10 AM »

IDK which is scarier, the midget porn or that manifold.

News:

Author Topic: 1995 geo metro build log NSFW (Read 37400 times)

TurboVFR