Topic: UI's 703hp Purple beast - She is injured (Read 324577 times)

crxvtec91 · « **Reply #930 on:** April 28, 2010, 08:57:30 AM »

So wheres the paint?

Urban Indian · « **Reply #931 on:** April 28, 2010, 01:24:28 PM »

put on 2 light coats. I just did this to try and cover up some of the gouges. It will be getting full paint this winter hopefully with that new front end.

Just waiting on my shim to be finished then everything is going back in. Most likely Thursday night.

bigdaddyvtec · « **Reply #932 on:** April 28, 2010, 01:56:41 PM »

you sir have alor of work to do

runsfromdacops · « **Reply #933 on:** April 28, 2010, 11:04:54 PM »

so is this bitch going to done in time

Urban Indian · « **Reply #934 on:** April 29, 2010, 12:04:45 AM »

You guys have no faith.

dvst8r · « **Reply #935 on:** April 29, 2010, 12:10:18 AM »

I have faith you will make it sparkley, just not so much faith that you will get it together and running.

glustic · « **Reply #936 on:** April 29, 2010, 12:27:12 AM »

Where's the air brush of barney?

narfdanarf · « **Reply #937 on:** April 29, 2010, 12:40:20 AM »

looks way better.

what the fuck is up with your cam gears or at least the rest of the bolts?

ratcityrex · « **Reply #938 on:** April 29, 2010, 01:22:44 AM »

He lives way up in the fucking arctic circle. Thats why there is rust on his shit.

bigdaddyvtec · « **Reply #939 on:** April 29, 2010, 02:23:05 AM »

Looks good... I talked to Passenger last night for a while, after tossing slurs at each other for a minute, we settled into the probability of Levis shit being doine...

What I (and Dave) find interesting is that he really thinks its going to be as easy as just "throwing" it back together, with no issue popping up holding back the needed tuning and other work...

LOL.....

Urban Indian · « **Reply #940 on:** April 29, 2010, 04:39:30 AM »

I dont see what you think the problem is? Do you know how many times I have had this thing apart?

The only difference this time is that it was actually running when I turned it off last year. I think I will drive down saturday morning with the car, I should have it finished and running by then.

Finished painting the engine bay, pulled the spare b16 tranny apart. Found some shit, I am seriously wondering how the fuck it stayed together. Every tooth is either showing major stress cracks, is cracked, is almost broken off or missing. Who knows how long this thing was like that.

That and one of my sycro's was beat to fuck in a weird spot on the outside ring?

bigdaddyvtec · « **Reply #941 on:** April 29, 2010, 12:07:28 PM »

Shut up and put that pile together. bay looks good negro

Passenger · « **Reply #942 on:** April 29, 2010, 01:22:02 PM »

Quote from: Urban Indian on April 29, 2010, 04:39:30 AM

I dont see what you think the problem is? Do you know how many times I have had this thing apart?

That would be the problem Chief.

highroller54 · « **Reply #943 on:** April 29, 2010, 01:38:40 PM »

Stop making 4 coarse meals for the nabour girl so she will bang you and get this bitch done.

bigdaddyvtec · « **Reply #944 on:** April 29, 2010, 01:40:47 PM »

Quote from: Passenger on April 29, 2010, 01:22:02 PM

Quote from: Urban Indian on April 29, 2010, 04:39:30 AM
I dont see what you think the problem is? Do you know how many times I have had this thing apart?

That would be the problem Chief.

I LOLED

onlyflash944 · « **Reply #945 on:** April 29, 2010, 06:24:18 PM »

Quote from: bigdaddyvtec on April 29, 2010, 01:40:47 PM

Quote from: Passenger on April 29, 2010, 01:22:02 PM
Quote from: Urban Indian on April 29, 2010, 04:39:30 AM
I dont see what you think the problem is? Do you know how many times I have had this thing apart?

That would be the problem Chief.

I LOLED

me too

pics of the syncro?

runsfromdacops · « **Reply #946 on:** April 29, 2010, 06:38:57 PM »

cool its shiny now make it go

Urban Indian · « **Reply #947 on:** April 30, 2010, 01:50:22 AM »

bigdaddyvtec · « **Reply #948 on:** April 30, 2010, 02:36:08 AM »

Levi: The syncro rings are EXACTLY what i thought... and are doing that excactly whyt we talked about. The 1st gear issue is a sure sign you need to start thinking about looking at them. HARD launch in 1st gear is Y.

side getting eaten is getting hammered against the selector hub... after a while, it can actually work its way UNDER the lobes of the hub and CRACK IT (The hub)... Ask me how I know. LOL

The reverse gear... Looks like its hitting something, not sure of a B trannys orientztion and what it could be.

As fort he shim... I wasnt aware you were talking about it being for the endcase/input shaft. As long as the oil trough fits still and flow isnt impeded that will work... Thats why those shims have the section cut out, so that the oil can get to the end.

Bay looks really good, gonna be clean this yrae. Cant wait to see the cage IF you get it all done in time

Urban Indian · « **Reply #949 on:** April 30, 2010, 05:47:30 AM »

Pretty much failed tonight.

Couldnt get the 2 case halves together because the fucking bearing on the end of the input shaft wouldnt go into the gear side case. I am going to try a little bit of heat and a bag of peas tomorrow. If that doesnt work I am going to throw a mock tranny in so that I can take the thing down to dave and figure out my tranny situation later.

Its going to live this weekend, don't worry.

trevor72 · « **Reply #950 on:** April 30, 2010, 06:39:38 AM »

live..... not sure, but it does sound like it will be together enough for the required mock up and Fab.

bigdaddyvtec · « **Reply #951 on:** April 30, 2010, 09:08:22 AM »

Quote from: Urban Indian on April 30, 2010, 05:47:30 AM

Pretty much failed tonight.

You shouldnt need ANY heat, youre doing it wrong... DONT FUCK WITH IT. PLEASE...

Let someone who knows do it for you K?

you

you.

LOL.

crxvtec91 · « **Reply #952 on:** April 30, 2010, 09:41:53 AM »

Put some oil on it, and give it a lil love tap. Should go on with out any really effort.

bigdaddyvtec · « **Reply #953 on:** April 30, 2010, 09:51:22 AM »

Quote from: crxvtec91 on April 30, 2010, 09:41:53 AM

Put some oil on it, and give it a lil love tap. Should go on with out any really effort.

It would be stupid to force it and fuck it up. I have an idea whats going on. Yo SURE its the BEARING holding it up??? 100 percent sure???

Call me later.

crxvtec91 · « **Reply #954 on:** April 30, 2010, 10:15:51 AM »

Quote from: bigdaddyvtec on April 30, 2010, 09:51:22 AM

Quote from: crxvtec91 on April 30, 2010, 09:41:53 AM
Put some oil on it, and give it a lil love tap. Should go on with out any really effort.

It would be stupid to force it and fuck it up. I have an idea whats going on. Yo SURE its the BEARING holding it up??? 100 percent sure???

Call me later.

I didn't say to force it on. If your forcing it on your doing it wrong.

crxvtec91 · « **Reply #955 on:** April 30, 2010, 10:19:32 AM »

What year is the car?

Urban Indian · « **Reply #956 on:** April 30, 2010, 12:22:56 PM »

Its the bearing. I can see it marring the case when I gave it some love taps. Its so fucking hit or miss with that bearing. It usually slides right on.

Either way, I am just going to say fuck it, I can play with it later. Time to go to work...... I hate tax time, its really cutting into play time

danz · « **Reply #957 on:** April 30, 2010, 06:39:03 PM »

fuckin taxes.

wait, you dont pay taxes....

bigdaddyvtec · « **Reply #958 on:** April 30, 2010, 06:43:41 PM »

Quote from: Urban Indian on April 30, 2010, 12:22:56 PM

Its the bearing. I can see it marring the case when I gave it some love taps. Its so fucking hit or miss with that bearing. It usually slides right on.

Either way, I am just going to say fuck it, I can play with it later. Time to go to work...... I hate tax time, its really cutting into play time

Put the bearing in first dummy, THEN slide the case on. The input shaft will line up, Then its just an issue trying not to knock the top lock ring off of the top of the gearset as you bring the case down.

You dont have to do it with the beqaring on the stack. The ONLY thing that makes easier is not knocking the lock ring off as you bring the case down. Use some grease to get that fucker to stick, or practice on:

Urban Indian · « **Reply #959 on:** April 30, 2010, 08:58:26 PM »

Quote from: danz on April 30, 2010, 06:39:03 PM

fuckin taxes.

wait, you dont pay taxes....

I actually have to pay taxes. The only time I do not pay is when I work on or purchase things on a reserve. Or get things shipped to the reserve.

Mad crazy rush this year at the office, I left early tonight to get my car together.

News:

Author Topic: UI's 703hp Purple beast - She is injured (Read 324577 times)