Topic: UI's 703hp Purple beast - She is injured (Read 324143 times)

dvst8r · « **Reply #120 on:** May 27, 2009, 09:59:14 AM »

Quote from: pistol on May 27, 2009, 03:04:09 AM

...biggest problem was trying to figure out how dave got the wastegates on :somb: ...

It is his small Mexican hands, that whole manifold, turbo, wastegate assembly process is built for Mexicans, or small Asians.

malichite · « **Reply #121 on:** May 27, 2009, 10:56:48 AM »

Quote from: dvst8r on May 27, 2009, 09:59:14 AM

Quote from: pistol on May 27, 2009, 03:04:09 AM
...biggest problem was trying to figure out how dave got the wastegates on :somb: ...

It is his small Mexican hands, that whole manifold, turbo, wastegate assembly process is built for Mexicans, or small Asians.

They make a big version of Asians?

dvst8r · « **Reply #122 on:** May 27, 2009, 10:59:59 AM »

Quote from: malichite on May 27, 2009, 10:56:48 AM

Quote from: dvst8r on May 27, 2009, 09:59:14 AM
Quote from: pistol on May 27, 2009, 03:04:09 AM
...biggest problem was trying to figure out how dave got the wastegates on :somb: ...

It is his small Mexican hands, that whole manifold, turbo, wastegate assembly process is built for Mexicans, or small Asians.

They make a big version of Asians?

I dunno about you, but I would consider Yao Ming a pretty big guy Asian or not, but yeah I guess stereotypically no.

Robb · « **Reply #123 on:** May 27, 2009, 11:11:37 AM »

This build has win all over it. Good luck Levi.

Passenger · « **Reply #124 on:** May 27, 2009, 01:27:40 PM »

I dunno what your guys issue is, I can get those wastegates on and off in under 10 minutes. Just use the same socket cap screws that were on there before :somb:

Keep going buddy

pistol · « **Reply #125 on:** May 27, 2009, 03:59:15 PM »

No issue. If I would have known about those socket cap screws, it wouldve been 10 minutes.

Plus you said it yourself Mexican hands and socket cap screws haha

Travis · « **Reply #126 on:** May 28, 2009, 12:24:33 AM »

STATUS

Loki · « **Reply #127 on:** May 28, 2009, 12:51:15 AM »

Looking good.

Passenger · « **Reply #128 on:** May 28, 2009, 01:15:49 AM »

Update beotch, where you at?

BangBusMaster · « **Reply #129 on:** May 28, 2009, 01:26:11 AM »

The word on the street is it start and ran.

Urban Indian · « **Reply #130 on:** May 28, 2009, 01:52:07 AM »

word on the street is shit is going down

Urban Indian · « **Reply #131 on:** May 28, 2009, 03:26:42 AM »

90dx · « **Reply #132 on:** May 28, 2009, 04:41:13 AM »

Well just got back from the indians reserve lands and the status is this pile should be ready for some nig nog boost controller setting dyno runs.Valves need to be adjusted[dont let him forget] but other then that it runs decent no leaks anywhere,lots of oil pressure and sounds reasonably healthy for a fresh motor. The underhood needs some def cleaning up and a few small cosmetic/non reliabilty related things done but genrally is ready for rippers. If you dont make at least 500whp dont call me or come by my house again i wish not to speak to you ever again as you will be dead to me . But other then that good luck and go for broke

dvst8r · « **Reply #133 on:** May 28, 2009, 09:49:40 AM »

hmmm it looks like Spiker has a dyno contender now.

ratcityrex · « **Reply #134 on:** May 28, 2009, 11:07:51 AM »

Push that bitch onto the trailer and get that fucker down here. Dont forget my mbc, you know it works, Just ask you last motor how well it worked!

trevor72 · « **Reply #135 on:** May 28, 2009, 11:31:59 AM »

Sweet. so for the dyno are you going to use milk crate bucket seats?

Passenger · « **Reply #136 on:** May 28, 2009, 11:37:00 AM »

Sweet man, when will you be here?

92CXyD · « **Reply #137 on:** May 28, 2009, 11:52:36 AM »

UI still want me to bring the sedan bumper?

dvst8r · « **Reply #138 on:** May 28, 2009, 12:55:45 PM »

Quote from: 92CXyD on May 28, 2009, 11:52:36 AM

UI still want me to bring the sedan bumper?

YES! That car most definitely needs it.

90dx · « **Reply #139 on:** May 28, 2009, 04:28:39 PM »

Quote from: 92CXyD on May 28, 2009, 11:52:36 AM

UI still want me to bring the sedan bumper?

Def bring it.

highroller54 · « **Reply #140 on:** May 28, 2009, 05:35:00 PM »

I pee'd a little

crxvtec91 · « **Reply #141 on:** May 29, 2009, 09:56:22 AM »

Really nice, for a turbo that big, hows spool time

Robb · « **Reply #142 on:** May 29, 2009, 09:57:16 AM »

Updates please. :yes:

dvst8r · « **Reply #143 on:** May 29, 2009, 11:21:07 AM »

Quote from: Robb on May 29, 2009, 09:57:16 AM

Updates please. :yes:

UI has the car on the trailer and is currently driving down to the NW dyno meet.

Passenger · « **Reply #144 on:** May 29, 2009, 09:42:09 PM »

They are hoping to do some street tuning tonight, possibly some dyno tuning as well.

dvst8r · « **Reply #145 on:** May 29, 2009, 10:00:12 PM »

Quote from: Passenger on May 29, 2009, 09:42:09 PM

They are hoping to do some street tuning tonight, possibly some dyno tuning as well.

At your shop, or south of the boarder?

Did you set the valves?

onlyflash944 · « **Reply #146 on:** May 30, 2009, 02:09:09 PM »

only thing that would make this build more moeny is if it were a D

or some OC

Urban Indian · « **Reply #147 on:** May 31, 2009, 04:26:37 AM »

car made 424hp 267ft lbs @ 13psi 8500rpm limit

thing needs some issues sorting out thats for sure.

full spool at 13psi came at around 5400rpm creeped to around 14psi at the top part.

I was surprised at how quick that thing spooled

BoostForLife · « **Reply #148 on:** May 31, 2009, 04:38:22 AM »

Quote from: Urban Indian on May 31, 2009, 04:26:37 AM

car made 424hp 267ft lbs @ 13psi 8500rpm limit

thing needs some issues sorting out thats for sure.

full spool at 13psi came at around 5400rpm creeped to around 14psi at the top part.

I was surprised at how quick that thing spooled

+1 boost on that big motherfucker came on hard as fuck.

I got a vid of that run for you if you want.

ApexSilver06MR · « **Reply #149 on:** May 31, 2009, 11:10:04 AM »

Quote from: BoostForLife on May 31, 2009, 04:38:22 AM

Quote from: Urban Indian on May 31, 2009, 04:26:37 AM
car made 424hp 267ft lbs @ 13psi 8500rpm limit

thing needs some issues sorting out thats for sure.

full spool at 13psi came at around 5400rpm creeped to around 14psi at the top part.

I was surprised at how quick that thing spooled
+1 boost on that big motherfucker came on hard as fuck.

I got a vid of that run for you if you want.

post that shit in the aftermath thread

News:

Author Topic: UI's 703hp Purple beast - She is injured (Read 324143 times)

90dx

90dx

BoostForLife