Topic: My CRX shitbox that should be scrapped build (Read 62215 times)

Tim · « **Reply #90 on:** September 06, 2014, 04:35:48 AM »

11.04@132 first pass needing more boost and rpm off the line. Then something let go next pass thinking trans. I have a few spares

92CXyD · « **Reply #91 on:** September 06, 2014, 10:03:05 AM »

Quote from: Tim on September 06, 2014, 04:35:48 AM

11.04@132 first pass needing more boost and rpm off the line. Then something let go next pass thinking trans. I have a few spares

Awesome first pass, what was the 60ft time?

ratcityrex · « **Reply #92 on:** September 06, 2014, 11:08:45 AM »

Oh man. Only gonna get faster........ good shit

Tim · « **Reply #93 on:** September 07, 2014, 06:15:20 PM »

2.03 so real slow
107.4mph in the 1/8

Friend uploaded a video if it
https://m.youtube.com/watch?v=oSqrmiXSV64&feature=youtu.be

Tim · « **Reply #94 on:** September 09, 2014, 05:26:38 PM »

This one cracks me up, think the cops will buy it?

Tim · « **Reply #95 on:** September 12, 2014, 09:57:12 AM »

10.70 @ 136 with 1.77 60

next run was 1.70 60 but I missed 3rd

need more seat time, I'm all over the place.

crxvtec91 · « **Reply #96 on:** September 12, 2014, 11:53:02 AM »

Looks like a PA inspection sticker?

Tim · « **Reply #97 on:** September 12, 2014, 05:48:25 PM »

Yeah it's registered and insured.
Guy I just met manages a local shop so he told me stop by with my paperwork
I did and he filled out a 'legit' inspection sticker.

I don't even have brake lights let alone turn signals or both headlights.

crxvtec91 · « **Reply #98 on:** September 14, 2014, 12:27:04 PM »

Quote from: Tim on September 12, 2014, 05:48:25 PM

Yeah it's registered and insured.
Guy I just met manages a local shop so he told me stop by with my paperwork
I did and he filled out a 'legit' inspection sticker.

I don't even have brake lights let alone turn signals or both headlights.

Ever head out to island drag way?

ratcityrex · « **Reply #99 on:** September 14, 2014, 02:53:10 PM »

Man I kinda feel bad for you east coast guys. Do me to get tabs I just go online and enter in my license plate number and pay my $42 and they mail me new tabs and registration. No emissions, no inspections, and every 5 years they make you get new plates and it's a extra $20 or $25.

92CXyD · « **Reply #100 on:** September 15, 2014, 12:48:39 AM »

Quote from: ratcityrex on September 14, 2014, 02:53:10 PM

Man I kinda feel bad for you east coast guys. Do me to get tabs I just go online and enter in my license plate number and pay my $42 and they mail me new tabs and registration. No emissions, no inspections, and every 5 years they make you get new plates and it's a extra $20 or $25.

Same in Wyoming, except we have to show proof of insurance.

sewell94 · « **Reply #101 on:** September 15, 2014, 01:46:57 AM »

Quote from: Tim on September 12, 2014, 09:57:12 AM

need more seat time, I'm all over the place.

I agree to this, AND so...... now is the time to crank this whore.....

Tim · « **Reply #102 on:** September 15, 2014, 10:53:19 AM »

Never been to Island but wouldn't mind taking a road trip sometime, finally got my sketchy ass dolly to a point I don't think im going to kill anyone.

I think its $36/year to keep the plate, around $25 a year for safety inspection (sticker on the windshield)
I got it as a fuck you cause it's obviously in violation.

Tim · « **Reply #103 on:** September 18, 2014, 05:54:18 PM »

Ran a 10.5 last night filling the car up with smoke.
Turned out the dipstick was either left out or blew out and oiled the turbo.
Emptied the catch can and everything seemed fine after that.

Couple vids from last week when I ran the 10.7
I didn't ride the limiter as much in 1st last night and things are improving.
http://vid218.photobucket.com/albums/cc302/stenseltizm/CRX%202014%20Build/IMG_2478_zps28a08866.mp4
http://vid218.photobucket.com/albums/cc302/stenseltizm/CRX%202014%20Build/IMG_2477_zps6c0f4f30.mp4

Trying to think of something really cheap to do to the suspension before next weekend.
Thinking limiting straps up front, any ideas for the rear?

Friend threw a sticker on the back because my response when asked why I won't spend money on making it look good or x part is I'm a broke dick.

92CXyD · « **Reply #104 on:** September 18, 2014, 05:58:03 PM »

Good sticker!!!

Gives ya style points.

ratcityrex · « **Reply #105 on:** September 18, 2014, 11:43:30 PM »

What about spring supports? They used them when u have a coil spring that's week. Your local auto parts store should have them. Slam a few of those in the rear springs to stiffen up the rear.

turbohf · « **Reply #106 on:** September 19, 2014, 12:14:22 AM »

where are the rhmt stickers?

dont think ihave actually seen a broken intermediate shaft.

looking good. keep it up.

Tim · « **Reply #107 on:** September 19, 2014, 04:00:20 AM »

I was thinking jam something into the springs. I'll look into options tomorrow

I still need to dig out the rhmt stickers from somewhere in my garage. For never running stickers this damn thing is going to be covered soon

Thanks guys. This thing is a blast. Its still the stock sleeve block and only on 16 psi. It's been taking some abuse while I learn wtf I'm doing.

crxvtec91 · « **Reply #108 on:** September 19, 2014, 08:46:34 AM »

Use seat belts for limiting straps!

Tim · « **Reply #109 on:** September 19, 2014, 09:24:09 AM »

Was thinking that or some steel cable. have to see what I have lying around in the garage or at work.
I know steel cable and the crush sleeves are cheap at Lowes and I have the large crimpers at work if I can't find seatbelts from any parted cars.

dvst8r · « **Reply #110 on:** September 20, 2014, 10:52:28 AM »

I know there is a thread somewhere on here about alignments, limiting straps and rear springs.

Tim · « **Reply #111 on:** May 06, 2015, 05:09:43 PM »

took it for a sunday drive.
welded #2 rod bearing
wiped out my cams and rockers
i'm sure there will be more damage once I decide to dig in further.

ratcityrex · « **Reply #112 on:** May 06, 2015, 06:38:27 PM »

Awe fucking shitty man.

jdmhatchracer94 · « **Reply #113 on:** May 07, 2015, 12:38:15 AM »

Shitty

Tim · « **Reply #114 on:** May 07, 2015, 07:38:16 AM »

It happens.
I have a spare crank and a spare set of rods.
Depending how much else there is it so far it's going to cost me cams and bearings.
Times the killer lately

Tim · « **Reply #115 on:** October 21, 2015, 07:40:05 PM »

Anyone ever run pistons after they've smacked the head from a spun bearing?

Swung by the machine shop.
He said if it was his engine he'd polish the cams and pistons and rock them.
Bought a complete ls valve cover to alternator for $70 so I'll call that crank free once I part it out.
Still have these scat rods I've had forever.
Going to buy some wrist pins from Tom and some new bearings and be back in business with Shit I've had lying around. Even more ghetto than the last engine.

Left everything sit for months with e85 and the injectors still worked. Have to have them flowed to confirm but looks like I lucked out and nothing rusted like the horror stories you hear.

Not the right time of year but I needed an escape from life.

BoostedSchemes · « **Reply #116 on:** November 21, 2015, 06:51:30 PM »

you've been building towards this for... 10 years

Tim · « **Reply #117 on:** November 24, 2015, 11:27:49 AM »

I strive for mediocrity.

crxvtec91 · « **Reply #118 on:** November 24, 2015, 11:55:13 PM »

Well played

Tim · « **Reply #119 on:** March 22, 2016, 11:47:54 PM »

So I did a thing

News:

Author Topic: My CRX shitbox that should be scrapped build (Read 62215 times)