Topic: Trevor's Canadian D Build saga now post pinks all out *updates 7/28/10* (Read 85458 times)

trevor72 · « **Reply #120 on:** August 17, 2009, 10:16:50 PM »

Quote from: Savier on August 17, 2009, 07:16:34 PM

Quote from: trevor72 on August 12, 2009, 04:19:59 AM

and the main room of my 'apartment-shop' for the curious folowers

you got nicer floors in your garage then most people have in their homes

NIGGER THAT IS MY HOME

trevor72 · « **Reply #121 on:** August 17, 2009, 10:17:44 PM »

Quote from: dvst8r on August 17, 2009, 09:49:08 PM

Quote from: Ntrain2k on August 17, 2009, 09:23:05 PM
Quote from: malichite on August 17, 2009, 08:54:29 PM
Question is, how is the bowling ball going to help make HP?

Kind of looks like a helmet.

It's a super sweet early 80's Arai that he painted flat black.

Correct, and free at that, prior to paint.

trevor72 · « **Reply #122 on:** August 17, 2009, 11:39:58 PM »

Blackie the super honda goes 12's agains a GN

malichite · « **Reply #123 on:** August 18, 2009, 12:19:04 AM »

Fuck I suck at taking video! Still a pretty sweet run!

trevor72 · « **Reply #124 on:** August 18, 2009, 01:22:38 AM »

Quote from: malichite on August 18, 2009, 12:19:04 AM

Fuck I suck at taking video! Still a pretty sweet run!

Ya but photos.... man you rock!! thanks!

blackie super honda 12.57 @ 111

Blackie super honda on the dyno 305 whp

trevor72 · « **Reply #125 on:** August 18, 2009, 02:29:47 AM »

Urban Indian · « **Reply #126 on:** August 18, 2009, 02:32:02 AM »

You need to be careful launching without preloading

axels and tranny's DO NOT like that.

You know that I know this

Savier · « **Reply #127 on:** August 18, 2009, 02:53:43 AM »

Quote from: trevor72 on August 17, 2009, 10:16:50 PM

Quote from: Savier on August 17, 2009, 07:16:34 PM
Quote from: trevor72 on August 12, 2009, 04:19:59 AM

and the main room of my 'apartment-shop' for the curious folowers

you got nicer floors in your garage then most people have in their homes
NIGGER THAT IS MY HOME

I spy with my little eye, my 17mm socket? haha

I'll see if I can insure my car for the rest of the summer. We'll tear up the puddle :yes:

Urban Indian · « **Reply #128 on:** August 18, 2009, 10:42:41 AM »

Quote from: Savier on August 18, 2009, 02:53:43 AM

I'll see if I can insure my car for the rest of the summer. We'll tear up the puddle :yes:

I ask you this

where the fuck is your noob post faggot

post pron on the asap

highroller54 · « **Reply #129 on:** August 19, 2009, 12:17:12 PM »

Good work Trevor, I would have loved to been there! Looks like fun.

90dx · « **Reply #130 on:** August 20, 2009, 06:19:56 AM »

Nice work Trevor do something with the suspension that bitch is flopping like a trout on the beach when you launch

trevor72 · « **Reply #131 on:** October 15, 2009, 03:17:52 AM »

Urban Indian · « **Reply #132 on:** October 15, 2009, 05:06:26 AM »

excellent carnage sir

97Econobox · « **Reply #133 on:** October 15, 2009, 09:42:33 AM »

Little JB Weld and it will buff out.

Ntrain2k · « **Reply #134 on:** October 15, 2009, 09:59:23 AM »

Wheel hop?

ratcityrex · « **Reply #135 on:** October 15, 2009, 12:12:27 PM »

Quote from: Ntrain2k on October 15, 2009, 09:59:23 AM

Wheel hop?

Thats what I was thinking too as soon as I saw it.

onlyflash944 · « **Reply #136 on:** October 15, 2009, 01:13:40 PM »

nice

interesting you didn't explode the spider gears like i did, but instead went straight for the FD. by the way i have an extra 4.25 setup if you need it, diff and all

Loki · « **Reply #137 on:** October 15, 2009, 04:53:25 PM »

Good work Trevor.

trevor72 · « **Reply #138 on:** October 15, 2009, 05:59:42 PM »

Quote from: Loki on October 15, 2009, 04:53:25 PM

Good work Trevor.

thanks haha

Quote from: ratcityrex on October 15, 2009, 12:12:27 PM

Quote from: Ntrain2k on October 15, 2009, 09:59:23 AM
Wheel hop?

Thats what I was thinking too as soon as I saw it.

its possible.... it smashed this ring gear the weekend i put the limiting straps on... and it broke nice and hard...didn't even roll out of the beam. but to the point the slicks weren't balanced, so tire shake is possible, no wheel hop.

Quote from: onlyflash944 on October 15, 2009, 01:13:40 PM

nice

interesting you didn't explode the spider gears like i did, but instead went straight for the FD. by the way i have an extra 4.25 setup if you need it, diff and all

hmm well no spiders here to break..

but i'm pretty sure the backup tranny just broke the diff pin/spider assembly.

I have also lended my thoughts to the idea that welding the diff with the ring gear on brittled that bitch up... still rock solid gear set, thanks again chad.

brine04 · « **Reply #139 on:** October 15, 2009, 07:33:33 PM »

Nice work. Are you preloading or just sidestepping on the limiter? Now crack open the other and let's see it too.

onlyflash944 · « **Reply #140 on:** October 15, 2009, 08:11:38 PM »

lol at the lincoln locker

it is quite possible with how much weld you have on there that the heat cycle hurt the teeth on the final drive.

or you just found the next weak link in the transmission

Urban Indian · « **Reply #141 on:** October 15, 2009, 09:16:06 PM »

new FD and go?

trevor72 · « **Reply #142 on:** October 15, 2009, 11:24:30 PM »

Quote from: Urban Indian on October 15, 2009, 09:16:06 PM

new FD and go?

already swapped, need new diff bearing, and to pull the trans that's in the car.

anyone know if this bearing ntn tmb208cz is available commercially or if its one of those gay OEM protected bearings like the ISB was??

is this a good number? 6208 ZZ C3 SRI2

just some thoughts, i'll find out tomorrow when i call bc bearing

Teg2boo · « **Reply #143 on:** October 16, 2009, 12:58:46 AM »

Quote from: brine04 on October 15, 2009, 07:33:33 PM

Nice work. Are you preloading or just sidestepping on the limiter? Now crack open the other and let's see it too.

What does "preloading" mean? I'm tired of reading it everywhere and not knowing what it means...

88dx · « **Reply #144 on:** October 16, 2009, 01:02:11 AM »

Quote from: Teg2boo on October 16, 2009, 12:58:46 AM

Quote from: brine04 on October 15, 2009, 07:33:33 PM
Nice work. Are you preloading or just sidestepping on the limiter? Now crack open the other and let's see it too.

What does "preloading" mean? I'm tired of reading it everywhere and not knowing what it means...

Pull the e-brake up and let the clutch out so the axles and suspension get loaded as much as you can without rolling threw the lights

brine04 · « **Reply #145 on:** October 16, 2009, 02:31:10 AM »

Quote from: 88dx on October 16, 2009, 01:02:11 AM

Quote from: Teg2boo on October 16, 2009, 12:58:46 AM
Quote from: brine04 on October 15, 2009, 07:33:33 PM
Nice work. Are you preloading or just sidestepping on the limiter? Now crack open the other and let's see it too.

What does "preloading" mean? I'm tired of reading it everywhere and not knowing what it means...
Pull the e-brake up and let the clutch out so the axles and suspension get loaded as much as you can without rolling threw the lights

+1 it reduces the shock on the drivetrain when you launch since the "slack" is taken up.

highroller54 · « **Reply #146 on:** October 16, 2009, 09:58:47 AM »

Quote from: trevor72 on October 15, 2009, 05:59:42 PM

thanks again chad.

anything for my BC crew, I still need to send Passanger a intake manifold from a 6.0l diesel and Urban a eg harness but after this Urban might get fuck all.

Quote from: Urban Indian on October 14, 2009, 09:00:26 PM

Quote from: crxvtec91 on October 14, 2009, 11:25:09 AM

I'll say Levi is the only good one.

Levi, Rachel, Pistol, Trevor, Passenger, 90dx, Loki, dvst8r, bnorth

we are all good shit

Teg2boo · « **Reply #147 on:** October 16, 2009, 10:19:32 AM »

Quote from: 88dx on October 16, 2009, 01:02:11 AM

Quote from: Teg2boo on October 16, 2009, 12:58:46 AM
Quote from: brine04 on October 15, 2009, 07:33:33 PM
Nice work. Are you preloading or just sidestepping on the limiter? Now crack open the other and let's see it too.

What does "preloading" mean? I'm tired of reading it everywhere and not knowing what it means...
Pull the e-brake up and let the clutch out so the axles and suspension get loaded as much as you can without rolling threw the lights

Thank you guys!

90dx · « **Reply #148 on:** October 16, 2009, 10:34:14 AM »

The diff bearings can be matched up by a aftermarket supplier i got some before.Nice work

trevor72 · « **Reply #149 on:** October 16, 2009, 11:27:56 AM »

well after 17 years, honda still has OEM propriety rights on their bearings, it pisses me right off you shouldn't be allowed to do so for so long.I mean its a 12$ shielded roller bearing MAYBE if that! FUCKING smart business men, dammit.

Demers, if you have any numbers or a cool guy to talk to i'd be flattered big guy

News:

Author Topic: Trevor's Canadian D Build saga now post pinks all out *updates 7/28/10* (Read 85458 times)

90dx

90dx

Author Topic: Trevor's Canadian D Build saga now post pinks all out updates 7/28/10 (Read 85458 times)