Topic: Project 11 second SI E85 rippers vids added (Read 70723 times)

Pootie · « **Reply #90 on:** April 25, 2010, 08:58:07 PM »

damn sucks.. get that thing back up and running!!

hope all goes well with the rebuild.

crxvtec91 · « **Reply #91 on:** April 26, 2010, 09:36:26 PM »

The nog got some new parts. He holding out

boosted 00 black si · « **Reply #92 on:** April 27, 2010, 04:05:57 PM »

the rebuild is in the works
got a new block done already

new set up

ls block bored .20 over
je 9:1 pistons
pauter rods
balanced and polished crank
acl bearings

working on getting a b16 head
ordering a full set of manley valves next week
i already got the valve springs and retainers (skunk 2)

also picked up a ball bearing turbo the holset is for sale now

glustic · « **Reply #93 on:** April 27, 2010, 04:08:30 PM »

Damn son. Someone has a nice bank roll. Looking forward to this.

boosted 00 black si · « **Reply #94 on:** April 27, 2010, 04:11:19 PM »

nah i'm poor

n i work 7 days a week

boosted 00 black si · « **Reply #95 on:** April 27, 2010, 04:13:52 PM »

i bought the block from a friend at the machine shop he worked a payment plan out with me

Eggylshatch · « **Reply #96 on:** April 27, 2010, 04:15:09 PM »

sorry about the engine, but how much for the holset? and what size is that exhaust housing?

boosted 00 black si · « **Reply #97 on:** April 27, 2010, 04:30:23 PM »

12cm i'll take 340 shipped for it and if u want pics of the turbo and the port work its on the first page

crxvtec91 · « **Reply #98 on:** April 30, 2010, 10:54:39 AM »

Add;

http://www.realhomemadeturbo.com/forum/index.php?topic=435.msg5800#msg5800

Joseph Davis · « **Reply #99 on:** May 02, 2010, 10:01:01 AM »

Quote from: boosted 00 black si on April 25, 2010, 06:53:48 PM

yeah i'm pretty sure it jumped timing cause when i check the cam gears after it blew up the exhaust cam gear mark was facing the fire wall

No, this is not what happened. When you jump time enough to bang a valve, you bang all of them in all the cylinders. However, when you stave some valves into a piston, it's not uncommon to jump time between the increase in force between cam and crank and the engine loading/unloading as this happens.

The most likely answer is either simple mechanical failure of an OEM part taken beyond it's limits - whether you were cruising or not at the moment of failure has exactly jack and shit to do with what the valve has been through and any metal fatigue it's undergone. The other alternative, very likely, is that the head had a bent valve at some point that cracked a guide. Valve gets replaced, guide is still fucked up and the replacement valve hangs open and fucks some shit up.

Joseph Davis · « **Reply #100 on:** May 02, 2010, 10:02:42 AM »

Also, I'd rather have Ferrea valvetrain than anything. Nothing against Manley, but their shit hasn't been around as long to know wtf is up with it, and the slight chance they sell repackaged KMS/Supertech/china makes me queasy.

boosted 00 black si · « **Reply #101 on:** May 02, 2010, 10:07:38 AM »

Quote from: Joseph Davis on May 02, 2010, 10:01:01 AM

Quote from: boosted 00 black si on April 25, 2010, 06:53:48 PM
yeah i'm pretty sure it jumped timing cause when i check the cam gears after it blew up the exhaust cam gear mark was facing the fire wall

No, this is not what happened. When you jump time enough to bang a valve, you bang all of them in all the cylinders. However, when you stave some valves into a piston, it's not uncommon to jump time between the increase in force between cam and crank and the engine loading/unloading as this happens.

The most likely answer is either simple mechanical failure of an OEM part taken beyond it's limits - whether you were cruising or not at the moment of failure has exactly jack and shit to do with what the valve has been through and any metal fatigue it's undergone. The other alternative, very likely, is that the head had a bent valve at some point that cracked a guide. Valve gets replaced, guide is still fucked up and the replacement valve hangs open and fucks some shit up.

i agree this is what my buddy at the machine told me to

boosted 00 black si · « **Reply #102 on:** June 03, 2010, 11:29:22 AM »

stock ls + 20psi coming soon

crxvtec91 · « **Reply #103 on:** June 03, 2010, 11:46:25 AM »

Quote from: boosted 00 black si on June 03, 2010, 11:29:22 AM

stock ls + 20psi coming soon

Pic's nog PIC'S!

boosted 00 black si · « **Reply #104 on:** June 03, 2010, 03:28:41 PM »

soon steve im pulling the motor out the rex this weekend
i'm just throwing this ls in the si for now untill i get done with the built motor

should be fun

h2a · « **Reply #105 on:** June 03, 2010, 10:08:14 PM »

Nice , keep posting

Teg2boo · « **Reply #106 on:** June 04, 2010, 09:44:15 AM »

I don't know what is your turbo, but I'm not sure the stock LS @ 20psi will last very long.

400hp on stock motor would be pimp tho

boosted 00 black si · « **Reply #107 on:** June 04, 2010, 07:18:24 PM »

yes it will be pimp but i havent decided what turbo im using yet

crxvtec91 · « **Reply #108 on:** June 05, 2010, 12:20:59 AM »

Quote from: boosted 00 black si on June 04, 2010, 07:18:24 PM

yes it will be pimp but i havent decided what turbo im using yet

Blowing shit up is fun

.

Pops I have a h1c you can use until you get the other motor done. Only problem is that it has no cold side housing for some reason

boosted 00 black si · « **Reply #109 on:** June 06, 2010, 09:08:22 AM »

steve ur the man when can i come get :yes:

crxvtec91 · « **Reply #110 on:** June 06, 2010, 02:04:41 PM »

Quote from: boosted 00 black si on June 06, 2010, 09:08:22 AM

steve ur the man when can i come get :yes:

Lmk hit me up

boosted 00 black si · « **Reply #111 on:** June 08, 2010, 11:21:40 AM »

yo steve give me a call i'm trying to come pick that turbo up 2day :yes:

boosted 00 black si · « **Reply #112 on:** July 10, 2010, 11:53:08 AM »

picked these dsm 450's up for 20 bucks n this this 60-1 turbonetics ball bearing turbo.

free stock ls motor out the rex

crxvtec91 · « **Reply #113 on:** July 10, 2010, 01:51:21 PM »

Get it in already!

davidawg · « **Reply #114 on:** July 10, 2010, 02:17:24 PM »

Quote from: boosted 00 black si on July 10, 2010, 11:53:08 AM

picked these dsm 450's up for 20 bucks n this this 60-1 turbonetics ball bearing turbo. i got the turbo for 200 bucks off a friend

you, have fantastic luck!

boosted 00 black si · « **Reply #115 on:** July 11, 2010, 10:55:47 AM »

yes steve its going together i pulled the motor out the rex..i still need arp headstuds and a 2.5 bar map

glustic · « **Reply #116 on:** August 08, 2010, 02:51:22 PM »

Updates?

crxvtec91 · « **Reply #117 on:** August 08, 2010, 05:27:22 PM »

Quote from: glustic on August 08, 2010, 02:51:22 PM

Updates?

The nog got some big boost stock motor updates he is holding out on

schim187 · « **Reply #118 on:** August 09, 2010, 04:04:26 AM »

and then?...

boosted 00 black si · « **Reply #119 on:** August 09, 2010, 07:21:31 AM »

yup getting the valves adjusted today..im waiting for the valve cover gasket n axle seals to get here should be here today tho. ill update later with some pics

News:

Author Topic: Project 11 second SI E85 rippers vids added (Read 70723 times)

h2a