Topic: my rwd crx project CRX2000! (Read 257320 times)

hatchboy · « **Reply #480 on:** May 31, 2012, 02:22:29 PM »

Quote from: weirtech on May 31, 2012, 01:38:36 PM

sorry guys. i'm having to send my injectors back to injector dynamics for testing. i ordered the same time with another friend and his were no good so he sent them back and they tested them and then sent him a new set.

the bs part of it is i have to pay for the testing and only get a refund if they turn out to be no good... even though they fall within the serial number range of known to be questionable (but never recalled) injectors.

that is a fail for injector dynamics in my books.

Do you have the pictures still of the fabrication process? 95% of them in this thread are so old that they are dead.

ratcityrex · « **Reply #481 on:** May 31, 2012, 03:13:04 PM »

Quote from: weirtech on May 31, 2012, 01:38:36 PM

sorry guys. i'm having to send my injectors back to injector dynamics for testing. i ordered the same time with another friend and his were no good so he sent them back and they tested them and then sent him a new set.

the bs part of it is i have to pay for the testing and only get a refund if they turn out to be no good... even though they fall within the serial number range of known to be questionable (but never recalled) injectors.

that is a fail for injector dynamics in my books.

hit up sewell for some injectors

weirtech · « **Reply #482 on:** June 01, 2012, 09:38:37 AM »

Quote from: hatchboy on May 31, 2012, 02:22:29 PM

Quote from: weirtech on May 31, 2012, 01:38:36 PM
sorry guys. i'm having to send my injectors back to injector dynamics for testing. i ordered the same time with another friend and his were no good so he sent them back and they tested them and then sent him a new set.

the bs part of it is i have to pay for the testing and only get a refund if they turn out to be no good... even though they fall within the serial number range of known to be questionable (but never recalled) injectors.

that is a fail for injector dynamics in my books.
Do you have the pictures still of the fabrication process? 95% of them in this thread are so old that they are dead.

you can find some of them here:
http://www.facebook.com/media/set/?set=a.146468268757639.36099.137961856274947&type=3

malichite · « **Reply #483 on:** June 01, 2012, 03:47:18 PM »

Quote from: weirtech on June 01, 2012, 09:38:37 AM

Quote from: hatchboy on May 31, 2012, 02:22:29 PM
Quote from: weirtech on May 31, 2012, 01:38:36 PM
sorry guys. i'm having to send my injectors back to injector dynamics for testing. i ordered the same time with another friend and his were no good so he sent them back and they tested them and then sent him a new set.

the bs part of it is i have to pay for the testing and only get a refund if they turn out to be no good... even though they fall within the serial number range of known to be questionable (but never recalled) injectors.

that is a fail for injector dynamics in my books.
Do you have the pictures still of the fabrication process? 95% of them in this thread are so old that they are dead.

you can find some of them here:
http://www.facebook.com/media/set/?set=a.146468268757639.36099.137961856274947&type=3

You have been PM'd sir. You now have all the image storage you need

drunkmunky · « **Reply #484 on:** June 19, 2012, 12:30:29 AM »

what kind of material is the front sub frame made out of?

thickness, type of aluminum?

jdmhatchracer94 · « **Reply #485 on:** June 19, 2012, 12:47:24 AM »

Quote from: drunkmunky on June 19, 2012, 12:30:29 AM

what kind of material is the front sub frame made out of?

thickness, type of aluminum?

Fuck you get out

weirtech · « **Reply #486 on:** July 29, 2012, 10:54:35 AM »

first rubber laid down was getting it out of the shop to go around the parking lot to make sure the clutch is working properly.

it spins the tires almost at idle. i think i'm going to have some serious traction issues. i need to get a proper alignment and then get it on the road. right foot is getting itchy.

92CXyD · « **Reply #487 on:** July 29, 2012, 11:10:30 AM »

Awesome, happy for ya.

ratcityrex · « **Reply #488 on:** July 29, 2012, 12:37:40 PM »

Fuck yeah!

highroller54 · « **Reply #489 on:** July 29, 2012, 03:56:26 PM »

drool

jdmhatchracer94 · « **Reply #490 on:** July 29, 2012, 04:35:07 PM »

Oh ya

hatchboy · « **Reply #491 on:** July 30, 2012, 02:28:06 AM »

About time! Great thing to see how far this project has came throughout the ... years?
lol

Seriously though, its time for some videos.

zombiez · « **Reply #492 on:** August 17, 2012, 03:27:43 PM »

any updates ?

hatchboy · « **Reply #493 on:** August 20, 2012, 03:46:47 PM »

Quote from: zombiez on August 17, 2012, 03:27:43 PM

any updates ?

.....

weirtech · « **Reply #494 on:** August 21, 2012, 04:42:30 PM »

no time to work on it

i don't want to tell customers to fuck off so i can finish it. $:-\$

i need to rebuild the rear suspension, then get an alignment, then the tuning starts.

danz · « **Reply #495 on:** August 24, 2012, 12:15:49 AM »

ill be needing a BMW M10 exhaust flange soon,mister.

Frizzy · « **Reply #496 on:** September 06, 2012, 02:06:00 PM »

Damn. I just read the entire thread on that "other forum" and then came over here to finish reading and all I can say is holy fuck that is sick.

My buddy has a crashed 2000 S2K with a F20c and it makes me want to do this to my CRX haha. I know i'd run into so many problems though so i'll leave mine alone for now. Keep working on this thing! I wanna see some strip videos and some donuts!

92CXyD · « **Reply #497 on:** November 14, 2012, 08:58:32 PM »

Congrats on making it on a major magazine's http://www.facebook.com/hondatuningmag

weirtech · « **Reply #498 on:** November 29, 2012, 08:22:58 PM »

^^^ thanks. not sure how they caught site of it, but it sure boosted the # of likes on my fb page.

it moves:
CRX2000 rattle shakedown

PhilStubbs · « **Reply #499 on:** November 29, 2012, 08:30:24 PM »

Fabrication Life has been posting links to your page on facebook.

thats awesome. i said it on FB and ill say it here, it looks so natural with the back end swinging out. lol

ratcityrex · « **Reply #500 on:** November 29, 2012, 11:55:51 PM »

DEAD FUCKING SEXY!

Gonna be tough trying to keep it straight with the short wheel base. = FUN

Foowee · « **Reply #501 on:** November 30, 2012, 03:32:05 AM »

weirtech · « **Reply #502 on:** November 30, 2012, 08:55:11 AM »

yeah, i couldn't stop laughing at how effortlessly the back end wants to get loose. traction is going to be a serious issue. i think some fatter slicks will be required for the rear on track days. i have a half bar spring in the wg and haven't even cracked it open yet. i'm definitely not going to put more boost in it than that. i won't be able to use it. there are still a few small issues i need to work out. the rear suspension squats more than 2" under acceleration so i need to lift the back end up a bit. that is easy enough to do though. there are also a few rattles i need to get rid of.

thanks guys,
aaron

PhilStubbs · « **Reply #503 on:** November 30, 2012, 09:00:20 AM »

What are you running for rear tires now? Maybe just stiffer springs in the rear will help

weirtech · « **Reply #504 on:** November 30, 2012, 12:39:39 PM »

i do want the back end to squat to help with traction. the tires are 225/40/15 rs3's. i may need to get some 275 hoosiers for track days.

DSMR · « **Reply #505 on:** November 30, 2012, 02:21:16 PM »

I just came.

crxvtec91 · « **Reply #506 on:** November 30, 2012, 04:00:15 PM »

Simply badass!

shadow · « **Reply #507 on:** December 03, 2012, 12:09:14 AM »

i was waiting for a little donut action in the vid.

Phate · « **Reply #508 on:** December 03, 2012, 11:03:25 AM »

Quote from: weirtech on November 29, 2012, 08:22:58 PM

^^^ thanks. not sure how they caught site of it, but it sure boosted the # of likes on my fb page.

it moves:
CRX2000 rattle shakedown

That thing looks like its a riot to drive. Sorta like the low-grip tires on the new toyobaru's, it lets you do stupid and fun things at like 15-20mph, lol.

MantisX · « **Reply #509 on:** December 03, 2012, 12:20:28 PM »

Time to tub it and go 10.5 on the rear.

News:

Author Topic: my rwd crx project CRX2000! (Read 257320 times)

zombiez