Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

First start

12 (8.5%)

2 weeks

4 (2.8%)

1 month

7 (5%)

6 months

2 (1.4%)

1 year

4 (2.8%)

never

7 (5%)

motor already blew up, before being assembled

18 (12.8%)

CRX

28 (19.9%)

HHH

24 (17%)

JDSAP

16 (11.3%)

T2BSAP

13 (9.2%)

Fuck people who say "Fuck the French" but live with them?

6 (4.3%)

Total Members Voted: 49

[Teg2boo]

I forgot to add this info, it's the second ring.

[Teg2boo]

If 0.006 doesn't matter, how much is too much?

[Teg2boo]

Bought an aluminum half size rad on ebay. Like that, I'll have plenty of space for the wastegate. 

[Teg2boo]

Pistons are in, oil pump cleaned/installed. Interresting fact is that I installed 2 pistons by hand because le tabarnak de ring compressor broke...

 I'm now doing my cylinder head.

[HiProfile]

Pistons are in, oil pump cleaned/installed. Interresting fact is that I installed 2 pistons by hand because le tabarnak de ring compressor broke...

sheetmetal + vicegrips = win

Someone else posted a different take on a rhmt ring compressor, I forgot what they used though. The version above I like the most (albeit the pro version, wrench-like handles), as it tends to not slip, and rarely breaks rings.

[92CXyD]

I used a 3" hose clamp before it works if th clamp is 3/4" wide or more. ;D

[BoostedSchemes]

i like to make john west insert the piston/rod assembly into his colon bearing first, then install it by sitting squarely over the center of the bore... he recently installed a set of 89mm pistons like so, but fortunately the 5mm difference did not make him damage my ls install.

[g_shok]

don't forget to rotate the cam pulley counterclockwise 36 degrees before you put the belt on for good luck 

[Teg2boo]

don't forget to rotate the cam pulley counterclockwise 36 degrees before you put the belt on for good luck 

I know this, it already been done! Don't think I'm dumb.

[highroller54]

Why does my girl friend have a penis and yours dont 

[Teg2boo]

The block is in the car. Had to put it by hand and alone the fucking car. The hoist was at dad's friend's house and anyway, it was raining and the engine hoist was too big to fit in the garage the way I positioned the car. I had to lift it at least 20 times to be able to put the bolts in the driver side motor mount. Very good exercise for my back.

Tonight I install the transmission and the more other things I can do. Hoping to start it up tonight or tomorrow.

How to remove engine redneck style. It finally felt on the ground pouring collant and oil everywhere...
Should have done it by hand like I installed it.





Heavy duty ratchet for big job. 3/4" drive

[highroller54]

do work son!

[Teg2boo]

So, it's not going very well... Had to remove the flywheel I installed yesterday cause I forgot to install the pilot bearing... Clutch installation was ok. Installation of the transmission goes wrong tho...

Tomorrow my gf needs her car, so I can't work on mine.

Todo list:

-Install the transmission  - 15 min to 2 hours
-Install starter - 15 min
-Install random brackets - 30 min
-Install alternator - 15 min
-Install cylinder head - 30 min
-Install intake manifold - 15 min
-Install turbo on exhaust manifold - 15 min
-Install exhaust manifold - 15 min
-Install/build downpipe (depends if I install ramhorn or miniram) 15min / 3 hours
-Install radiator + fan - 15 min
-Install injectors - 15 min
-Plug sensors, wires and hoses  - 30 min
-Replace outer and inner tie rods - 1.5h
-Weld my shift rod that I had to cut because bitch pin was too much of a fucking bitch - 15 min
-Install rods - 30 min
-Install axles - 30 min
-Install brakes - 15 min
-Install wheel - 5 min
-Do a basemap for new setup  - 30 min
-Break in - 1 hour
-Ripper 1000 hours
-Profit

Total: 12 hours before start up

Damn, I have job for at least a week at 3 hours/day. I need a beater...

[Teg2boo]

Just bought this for 500$

http://www.lespac.com/d-vehicules-autos-laval-pont-viau-pontiac-sunfire-gtx-1998-LPCaZZ22286700

At least I'm free to go where I want until my car is done.

[BoostedSchemes]

did it come with a boyfriend or do you have to bring your own

[Teg2boo]

did it come with a boyfriend or do you have to bring your own

It was at my choice so I choose to bring my own since there are plenty of candidate on this forum. 

[BoostedSchemes]

I knew you were just here to pick up guys

[Teg2boo]

Kind of update... Clutch doesn't fit, I didn't know there was a difference between 90-91 and 92+ transmission. The shaft is different so I can't use the clutch.

Ordered one from LSD motorsport and should receive it next week.

I forgot to install the dowel pins on the head/block so I need to take the head apart and reinstall everything. The timing belt was installed, valve adjusted, FUCK. Found today that I only had one in good shape and the other one is at the apartment and not in the garage. So far, it's going very bad lol

Good thing today:
Intake manifold ported for the oversized throttle body.

[Towdogg]

Pm'ed about that 90-91 clutch......   Jew

[Teg2boo]

I bought it from Chris M on OHMT. ACT Xtreme and 6 pucks disc.

...

30 minutes later

http://www.homemadeturbo.com/f9/act-b-series-cable-extreme-pressure-plate-6puck-105-shipped-92220/

I'll ship it at same price 120$ since shipping cost fucking lot of money.

[Teg2boo]

PM just don't work for me... Get db error all the time

[Towdogg]

Post pics....  Of the disc

[Teg2boo]

In 2 days, I'm not going to the garage tomorrow.

Edit: best I can find for now

[Teg2boo]

Some pics of my dad's camaro and a friend's cavalier.



 

[Joseph Davis]

Those are some Frenchified rides.  Do you live near the Bay of Fundy?

[Teg2boo]

Those are some Frenchified rides.  Do you live near the Bay of Fundy?

If 1000km in considered near, yeah, I am.

[Joseph Davis]

Then I'll not be sleeping on your couch when I visit there.

[Teg2boo]

Then I'll not be sleeping on your couch when I visit there.

You can sleep on my couch at anytime, just call me couple of hour before you arrive. You need to be near Montreal tho.

Pics of the clutch for 2dogs and some random pics

My new cellar and 200$ worth of red wine.


Really out of context, but I am a baller when I have money lol


Working on my car



Disc


Disc with some love of a ramhorn manifold


Widthedthed


Widthedthed again


Pressure plate side A


Pressure plate side B

[LS1pwNzJ00]

Your dad is one redneck frenchie, johnny would be proud.

Also, good luck with that ACT clutch, hope you have better luck than i did.

[Teg2boo]

I'm trying to selling it out to 2dogs. Shut up sir.   I bought a LSD 412lbs torque clutch/pressure plate. I

Your dad is one redneck frenchie, johnny would be proud.

Also, good luck with that ACT clutch, hope you have better luck than i did.

Shut up Scott, I'm trying to sell this clutch

Seriously, it won't fit 92-93 Integra cause splines are not the same as 90-91's. I bought a LSD clutch kit that should hold 415lbs of torque so I should be ok.

My dad is a french canadian redneck, no doubt of this. Seriously.

If it's 12pm somewhere in the world, you should be allowed to drink a beer. It might not sound as funny at it is in French, but I know you dad is an alcoholic and says something similar. lol