:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

AJ's 1966 Nova LSX twin turbo build! (link)

Pages: [1] 2   Go Down

Author Topic: POS DSM Project **DYNO SHEET ON PAGE 1**  (Read 9092 times)

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
POS DSM Project **DYNO SHEET ON PAGE 1**
« on: October 29, 2011, 05:58:46 PM »


Ill find the pic that I had before it looked like this, and I will update this fucker a little later


**DYNO SHEET**



« Last Edit: December 05, 2011, 01:32:41 AM by glustic »
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: POS DSM Project
« Reply #1 on: October 29, 2011, 07:26:41 PM »
Wow a 4g63? So what, like 40 pounds of boost brah?
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #2 on: October 29, 2011, 10:32:52 PM »
A 2G?  Is that a 6 bolt swap, have you pinned the 7 bolt girdle to the block, or are you wasting our fucking time faggot?
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #3 on: October 29, 2011, 10:33:41 PM »
Quote from: HiProfile on October 29, 2011, 07:26:41 PM
Wow a 4g63? So what, like 40 pounds of boost brah?

Hopefully 60...


Haha I just want a decent track car, and a car to drive during the winter. Im sick of spending $400 a month in gas
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #4 on: October 29, 2011, 10:34:28 PM »
Quote from: Joseph Davis on October 29, 2011, 10:32:52 PM
A 2G?  Is that a 6 bolt swap, have you pinned the 7 bolt girdle to the block, or are you wasting our fucking time faggot?

More than anyone elses im wasting yours sweetheart  :-*
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #5 on: October 29, 2011, 10:43:52 PM »
I hope you haven't gone through the bottom end in the last couple years as that rerolls the crankwalk dice.  "Most" 7 bolts can handle 300whp, if it's been together for years without coming apart it can probably take 400.
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: POS DSM Project
« Reply #6 on: October 29, 2011, 11:34:13 PM »
Wasn't the crankwalk narrowed down to a very large run of bad bearings?
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #7 on: October 29, 2011, 11:42:53 PM »
The 7 bolt problem is the main girdle isn't pinned to the block like every other girdle, ever.
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: POS DSM Project
« Reply #8 on: October 30, 2011, 12:17:49 AM »
lol wat? how the hell could they have missed that?

Even my cheap desk has alignment dowels. and it doesn't spin at 7000 rpm.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #9 on: October 30, 2011, 01:24:35 AM »
Quote from: Joseph Davis on October 29, 2011, 11:42:53 PM
The 7 bolt problem is the main girdle isn't pinned to the block like every other girdle, ever.

Thanks for the advice sir, and to tell you the truth I dont know if its a 7 or 6 bolt.

Flipnog said its a galant vr4 motor (well IM) so im ASSuming its a 7 bolt

While Im quoting you... Any other way to tune these fuckers other than dsmlink or standalone?
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #10 on: October 30, 2011, 05:47:27 AM »
GVR-4 are 6 bolt motors.  In that chassis it's like putting a heterosexual into skinny jeans and sending him undercover to the gaybar, but whatever.

98-99 plastic case ECU is reflashable via Tactrix cable.  Also Evo8 or Lancer ECU.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #11 on: October 30, 2011, 11:16:01 PM »
Quote from: Joseph Davis on October 30, 2011, 05:47:27 AM
GVR-4 are 6 bolt motors.  In that chassis it's like putting a heterosexual into skinny jeans and sending him undercover to the gaybar, but whatever.

98-99 plastic case ECU is reflashable via Tactrix cable.  Also Evo8 or Lancer ECU.

Meh I cant fucking complain. I got the car for free.. Well..

I sold the civic for 4K + this car

Also, is the plastic housing black?

like this one?
http://www.ebay.com/itm/97-98-99-MITSUBISHI-ECLIPSE-TURBO-ENGINE-COMPUTER-ecm-ecu-MD359402-EXCELLENT-/320782883780?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item4ab0265bc4#ht_500wt_1341
« Last Edit: October 30, 2011, 11:28:00 PM by glustic »
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

mrgreengenes

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
Re: POS DSM Project
« Reply #12 on: November 01, 2011, 01:56:51 AM »
yes

also, the 6 bolt engine is identifiable by the oil pan.  It will be flat across where the crank pulley is, whereas the 7 bolt ones will drop down in an arc.

and, the 7 bolts have 7 bolts.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #13 on: November 05, 2011, 10:15:11 PM »
Been putting this front mount on... Had my buddys shop put the front bumper and headlights in... And this is what I discovered


Mother fuckers put bolts in under the headlights, so I had to pull the headlights (im a lazy fucker!)



Painted the pipes black

Trash can paint booth ftmfw!


As she shits now...



Funny thing is I bought these off a dude that took them off his 2g.. they dont fit worth a fuck without some fabbing..

Currently looking for a bigger turbo, injectors, black box ecu, tactrix 2.0, and fuel pump, and ill be getting tuned


Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #14 on: November 08, 2011, 07:08:36 PM »
You can run one of the Evo8 ECUs, or some of the 4cyl Eclipse/Lancer ECUs of that era.  Search thoroughly before buying, and keep in mind you have to purchase the correct KS for the ECU ($58 at the dealer).

Just an idea as the right ECU for the '97 my boss owns has been a bit of a pain to find.
Logged

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: POS DSM Project
« Reply #15 on: November 08, 2011, 09:08:01 PM »
Open bov. Interesting.
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #16 on: November 14, 2011, 01:07:55 AM »
So I do have a 6 bolt... score!

So I decided on getting the small 16g. Its actually in great condition.



Install process:



Got all the bolts off the o2 housing minus the one behind the o2 sensor, so off came the manifold.


And the bitch bolt


It was such a PITA that this is what bent....


Yes your reading that right... its a BENT MAC wrench!

So I bought some PB Blaster, and off it came. And what did I find? A broken wastegate tophat! What the fuck has my cousin done to this car????







All done:


Lower IC piping on.. ran into this little problem... already ordered a 180 silicon coupler and some t bolts


Decided to install this little gem


And I got the slim fan wired in and mounted


That is all the updates I have for now. I will keep you guys posted.
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #17 on: November 21, 2011, 01:52:24 PM »
I wired up the fan right... but it didnt kick on when I drove it... Coolant was boiling when I got the car back home... So I grounded out a few wires going to the ECU and now when the ignition is ON both the radiator and condenser fans turn on



Moar pics of outside

Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: POS DSM Project
« Reply #18 on: November 21, 2011, 04:15:43 PM »
looks good but u need a mans turbo  :noel:
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

Corey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3030
Re: POS DSM Project
« Reply #19 on: November 22, 2011, 12:53:49 PM »
i thought it was gonna be a track car
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #20 on: November 23, 2011, 02:22:27 PM »
Quote from: Corey on November 22, 2011, 12:53:49 PM
i thought it was gonna be a track car
Quote from: glustic on October 29, 2011, 10:33:41 PM
Quote from: HiProfile on October 29, 2011, 07:26:41 PM
Wow a 4g63? So what, like 40 pounds of boost brah?

Hopefully 60...


Haha I just want a decent track car, and a car to drive during the winter. Im sick of spending $400 a month in gas
Quote from: boosted 00 black si on November 21, 2011, 04:15:43 PM
looks good but u need a mans turbo  :noel:

The turbo I want is a 20g its brand new for $500... I will be getting a bigger turbo + bigger injectors soon...

I got my tactrix cable, black box ecu, and fuel pump! I will update you fuckers as soon as I get that shit put in tonight
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: POS DSM Project
« Reply #21 on: November 24, 2011, 02:55:01 AM »
you should go speed density and sell me your MAF/intake LOL...  :Jew:
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #22 on: November 24, 2011, 09:16:34 PM »
Quote from: turbohf on November 24, 2011, 02:55:01 AM
you should go speed density and sell me your MAF/intake LOL...  :Jew:

Sure. $500
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: POS DSM Project
« Reply #23 on: November 24, 2011, 10:01:06 PM »
slightly cheaper one on ebay...seriously. like 300bucks...some DSM people are crazy with there prices...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #24 on: December 02, 2011, 05:28:08 AM »
Updates havent updated this shit in a long time, but have done alot of work...

Decided to remove the 5 LBS of bullshit speaker wires...


Fuel pump install...


Good bye piece of shit fuel pump!


Flashable ECU installed with basemap + launch control flashed..


Ricer bumper finally removed (dumb fucks had it molded to the body with about 1/4 inch of fiberglass)

Yes you see a shower curtain rod holding up the hatch... fuck you!





And you can't forget the finishing touches... Gotta represent in Vegas (Heading down for a tune + drag strip tomorrow)



Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Ntrain2k

  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3016
Re: POS DSM Project
« Reply #25 on: December 02, 2011, 07:57:40 AM »
Quote from: glustic on December 02, 2011, 05:28:08 AM
And you can't forget the finishing touches... Gotta represent in Vegas (Heading down for a tune + drag strip tomorrow)


WIN
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: POS DSM Project
« Reply #26 on: December 02, 2011, 09:34:26 AM »
You can't say win about a DSM.  Gluestick has, however, earned a hearty GOOD LUCK!
Logged

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: POS DSM Project
« Reply #27 on: December 02, 2011, 09:44:02 AM »
Is your cousin's name Bennett by any chance?
Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: POS DSM Project
« Reply #28 on: December 02, 2011, 11:32:25 AM »
Quote from: Teg2boo on December 02, 2011, 09:44:02 AM
Is your cousin's name Bennett by any chance?

Building someone else's garbage DSM makes me think his name is Bennett.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: POS DSM Project
« Reply #29 on: December 02, 2011, 08:27:36 PM »
I'm building my DSM..

Anyways made 227 whp on a mustang Dyno @ 14 lbs on a small
16g
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK
Pages: [1] 2   Go Up
« previous next »